XINGYHENG100PCS 50Pair JST SM 2PIN 24AWG Female and Male Connection Plug with Red Black Terminal Connector Wire Cable for LED Light Strip 5.9’’

I bought these cables to make fan in the Kendo mask. I use it with BTEDZSW Gel Blaster Battery 2 Pack Include Upgraded 7.4V Li-ion Battery 1200mAh and USB Chargers 14500The color of cables are different from this battery. So I have to connect red to black and black to red. So I need to watch out.

Works great for small 12v led lights. I inspected mine as soon as they arrived because of all the reviews stating the polarity was mismatched between male/female plugs. No issues were found.

Great value with 50 male and 50 female plugs, and plenty of wire for most connections.

I checked each one before installing, after I disconnected them 2 times more than 13 of them had one or the other wire disconnected, or the wires broke off from the contact. This IS UTTER TRASH -> out of 50 pairs. 21 of them are still (INTACT) and this is less than 50% that is usable. Either the male or female connectors came completely apart from the wires and more than 62 of the male connectors one of the wires had fallen apart from SHEER NEGLECT after attempting to disconnect from the circuit board or another wire that came with the kit. IF YOU ARE LOOKING FOR RELIABLE CONTACTS, WHAT WAS SOLD WAS GARBAGE - TRASH... I am resorting to old school and going with (120 Pcs Quick Splice Wire Terminals, Male & Female Blue T-Tap Self-Stripping Quick Splice Connectors) at least I know I can use the housing and a wire combo to attach my electronics without it failing during weekly maintenance. I have bought similar products that looked like a good buy but this is a waste of your time and money.

I don't usually have the need to test cable assemblies when they arrive until now; the first time I ordered this item, I put several of them to work just to discover that many of them failed to connect; they were either intermittent or they were open-circuited altogether. This is my 2nd attempt at using these as rework was out of the question to use a different part-type; too many things relied on their use. This time I tested about 20% of them by passing current thru them; no failures with this batch so far; but I suppose time will be the final judge...

This seems rather thin for 22awg. It would appear to be 24awg, but you can't tell because there isn't anything printed on the jacket. However, it looks identical to another product that is 24awg when I compare them side by side.... even the picture makes the wire look thicker than what is actually received. Seems to work fine though.

They don't maintain a consistent connection. I had to completely replace them in the project I'm working on.

Lo que quería.