Viper Laser Throw Line Markers – Battery-Operated Precision Oche Lights in Multiple Styles

I installed this Viper laser throw/toe line marker as part of the dartboard cabinet I built in our basement, and it absolutely completes the setup! I wanted something more polished than tape or floor decals, and this laser line looks super sleek and professional — just like what you’d see in a pub or dart league setup. Mounting it was really straightforward. I attached it right under the cabinet, tightened the screws, and it hasn’t moved even after a few bumps. The beam is bright and sharp, totally visible even with the basement lights on. I also love that it runs on batteries, so there are no cords hanging around — keeps everything looking clean. It works great with both steel and soft tip darts, and the accuracy of the line is spot-on. No more arguing over where the throw line should be! If you’re building a dartboard cabinet or just want to upgrade your dart area, this laser line marker is a must-have. It adds a cool, high-end look and works perfectly every time.

Works great. Mounted to the under side of my cabinet. Just takes a soft touch to tight Len the screws to where you can still gently move the beam then just give a little snug and you’re good. Heavy hand will causes issues. You can see the line clearly in a lit room no problem.

The girl didn’t like the idea of an oche line in the middle of her floor, so I took a gamble on this. Very tricky to get both the pitch and distance dialed in, then have tightened down without the line moving. It will try your patience! Once you get it set though, it works really well. Very bright. Mounted mine a little lower (3 1/2’) than what’s pictured and it gave me about a 2 1/2’ long line. Laser is strong enough I imagine to be mounted anywhere and be good. Though the base and laser head seem solid, I worry anything more than a mild bump will knock the line out of place. All in all, great value for the money that solves a problem.

Update to original review: I just now replaced the batteries after 5 months of using it basically every other day. Battery life far exceeded my expectations and it was still working, the line was just getting a bit dim. The batteries still had about 1.06 volts apiece left in them, but it's definitely brighter now that I replaced them. I haven't had any problems with this item, highly recommended. If you know how to measure from left and right side of the board and then use the hypotenuse from the bulls eye to verify your line, you can simply put tape on the floor temporarily to aim this laser (you likely already have tape on the floor). I didn't find this hard to aim, just tighten (or loosen in my case) the screws so that you can still move the laser, then tighten slightly. I mounted this about 6" below my dartboard, attached to my backboard. I was worried that vibrations from the board would throw the laser off but I've used it for 2 weeks now (I practice a lot) and it hasn't moved at all. I just verified all measurements are still correct after probably 2000 darts thrown to the board. I can't speak to durability from a direct hit from a dart to the laser. I don't plan on ever doing that but I'm sure it will happen sometime. Batteries have held up just fine thus far, I thought about buying the AC adapter but if these batteries last me a couple of months I'm fine with that in order to not have a cord cluttering the area up. This is better than the Winmau laser which sticks out from the wall quite a bit more, I have experience with that one as well.

Good , but treatable hardware . Wrong screws provided for hollow wall anchors. Buy your own hollow wall anchors. Time consuming to adjust. Very finicky to adjust and lock down , but its doable

The only room in my home suitable for a steel tip dart board installation was the bonus room. This room has carpet on the floor, which is great to hide any marks left by darts that fall to the floor, but make installing a toe line more difficult. The Viper by GLD Products 37-0108 Laser Throw/Toe Line Marker looked like the best solution that I could find so I picked one up on Amazon. It has worked great. I didn't buy the power adapter and opted just to use batteries, but one is available for purchase. It is mounted close to the floor (bottom of the board in the photo provided) to ensure no one, especially my kids, would have an opportunity to look into the emitted laser. It was very easy to install with just two philips screws (included) that mounted directly to the back-board for my application. I ran a tape measure from the wall to the throw line distance of 7' 9.25" and then lined up the laser to that position on the floor. The battery compartments are on the front of the device, so the batteries can be replaced without moving the device. The only downside is that it doesn't have an auto-off feature, so if accidentally left powered on it would drain the batteries.

Excellent laser dart line! I like that you can mount it on the wall or under the dart board. My dart board hangs on a door . The board cabinet was made by me. I pre drilled holes smaller than the screws and had no issues with the screws. Some complained they snap but I think they're fine. The laser stays in place great if you read the instructions and tighten the screws on either side of the laser. I open and close the door my board hangs on all the time and the laser adjustment never moves.

This works and so I considered giving 4 stars but the setup was a bit frustrating and ridiculous. It mounted easily enough and it was lightweight enough to mount to my hollow wooden door without anchors. Due to the rotating nature of the laser you also didn't need it to be perfectly level to get the laser to be straight which is nice. My issue comes with setting up the laser to the precise line. The first time I set up the laser I had taken a few minutes to line it up and then I screwed down the screws to keep the laser positioned correctly. Seemed easy enough until I realized that screwing it down moved the laser up by a foot. If you line it up first then screwing it down will move the line. You can try to pinch the laser while you tighten the screw it will still move just a bit. If you tighten beforehand and try to adjust after, making the micro-adjustments necessary for precise alignment is a pain. Keep in mind that I did this by myself which makes it more difficult but my advice to people doing it on their own is measure out and then put an large book right behind the line. Then tighten down enough where the laser won't shake out of place but loose enough that you can make subtle changes to line up the laser precisely. The book will be a better reference point then just a tape measure on the ground but the hard part is finding the tension balance you need to line it up smoothly. It isn't impossible of course, just more of a pain than it should be. I would really like to see a type of scroll wheel you could use to make micro-adjustments after tightening the tension screws. So far it works well and although I have read some reviews saying that it is difficult to see in sunlight, I have found that it is manageable in all but the most sunny outdoor situations. I did put a fresh pair of eneloop batteries in so it's possible that even batteries with less charge would result in a duller less vibrant laser. Also regarding the batteries I have only used it for a few hours but will update the review once I have a better judgment on battery life. The laser is cool once it is setup but I think it is mostly unnecessary. It works well enough but I caution people when picking up bounce outs not to get a laser in the eye. Considering it seems of decent quality, isn't too expensive, and works I can recommend it if you really want a laser oche instead of using a adhesive tape line. Pictures description: The half carpet half hardwood picture shows the laser in good indoor CLT lighting. The marble picture is a close beam in good indoor fluorescent lighting on a light surface. The all hardwood picture shows the beam in a direct afternoon sunlight.

Works perfect

Ich habe mir diesen Dart Oche-Laser gekauft, um meine Abwurflinie sauber und professionell zu markieren, ohne störende Klebestreifen oder Bodenmarkierungen. Und ich muss sagen: Ich bin begeistert! Einfache Montage & Handhabung Die Installation war kinderleicht – der Laser wird einfach unter der Dartscheibe befestigt und per Knopfdruck aktiviert. Die Helligkeit des Lasers ist stark genug, um ihn auch bei normaler Raumbeleuchtung klar zu erkennen. Präzise & flexibel Der Laser projiziert eine exakte Linie auf den Boden, die sich leicht anpassen lässt, falls man unterschiedliche Abstände nutzen möchte (z. B. für Soft- und Steeldarts). Zudem bleibt der Boden frei von störenden Klebestreifen oder Markierungen. Fazit Ein superpraktisches Gadget für jeden Dartspieler! Kein lästiges Messen oder Bodenmarkierungen mehr – einfach einschalten und loslegen. Wer eine professionelle und flexible Lösung für die Abwurflinie sucht, ist mit diesem Laser bestens beraten. Klare Kaufempfehlung!

Works perfect.

Buen artículo relación calidad precio bueno fácil de instalar

The laser works great. Bright and easily seen. It is a little sensitive to adjust but not difficult.