KSA-002 Bar Valve Fix Kit, Chrome

Excellent quality at a good price highly recommend

Does the job at a good price

I wanted to retrofit a bath/shower mixer tap on my tiled wall without removing any tiles and without chasing copper pipes etc. inside the wall.These little brackets were perfect for the job - I just drilled a couple of holes in the tile where the pipes would come through, fed some flexible PEX pipe through the holes and out the skirting board under the bath, then fitted these brackets on the front of the tiles which allowed me to mount the mixer tap.Initially I just used the two screws and some wall plugs to hang each bracket, however the tap had a slight wobble to it - this was because the wall plugs were not flush with the tile. I used a Stanley knife to make the plugs flush and for extra reassurance I added some No More Nails adhesive to the back of each bracket. Now the tap is solid on the wall with no wobble.One tiny complaint - the protruding threads which your tap screws onto are quite long and therefore depending on your tap, a small bit of thread might still be visible when your tap is mounted. In my case I was using a Grohe mixer tap and about 2mm of thread is still visible. Probably using a thinner washer (or no washer at all!) inside the tap would solve the issue but it's not a big deal.

Great product made the job so simple

Excellent item

Easy to fix on and instructions are straight forward . Needed to change out original fixtures or thought but turns out they were okay just not been fitted correctly ie tightening up enough.

Worked great plumber used them no problem

Looks like a good bit of kit but they could have at least put some instructions in there saying how far the 15mm pipe comes out the wall for fitting the fixings..is it 15mm, 20mm, 22mm..who knows.

Simple and easy to useHighly recommended