2 Handle High Arc Centerset Bathroom Faucet

I’ve got a before and after photo.:) You can’t tell particularly well from the “before” photo but the white paint job is messy, the hardware is loose and messily painted 🤢, and worst of all, the faucet was super loose, made out of plastic, and clunky. We bought it for 30$ to replace an even worse looking vanity.😂 This faucet helped modernize the vanity so much! Here’s some stuff about the faucet. Pros: -easy to install and pretty intuitive, great instructions too! -handles turn smoothly -the whole thing looks sleek -the faucet itself can rotate, making it easier to wash your face in the sink because you can swivel the faucet to the side while rinsing your face. Didn’t even think about needing this but it’s so nice!! -all the hardware it comes with is great quality! I was expecting to have to buy additional tools or hardware but we literally didn’t need anything extra other than silicone/caulk. Which is a no-brainer anyway. They thought this kit through! Cons: nothing. Can’t think of anything. Tips: make sure to measure the distance between the faucet holes in the countertop! Absolutely necessary. The photos in the product’s advertisement are very helpful so refer to those to know how and where to measure before ordering. You won’t regret buying the right size the first time. That’s it! Love this faucet and if we renovate our other bathroom’s vanity, we will definitely buy one of these again. 🥳

love it, has some quirks but looks highend, like plastic inards and it has a 'stop drip' that goes for a few seconds but it doesnt leak, the areator masks that pretty good but removed you see it, and i'll keep it removed except with guests over with hard water .. ok to the install skinny, with care it'l be flawless, comes with everything and then some - - the drain works fine with careful mods if your pretty handy .. most sinks will be set far back so a couple of preps need to be done, So start with the fixture itself, no need to disassemble, if you have a dremel from the underside, use a wore out stone about 1/4" thick to drift the hole back towards the shoulder of the bottom, dont go past that .. do the same thing with the bottom plate gasket, drift it over to touch its shoulder edge then stop ... now mock it up on your counter top and figure out where your at, straight and whatnot ... now get the pull rod and some type of grease, any will do .. just put a very small dot on the very end ... drop it through the hole, it will be 'slightly' still tilted back to miss the edge of the gasket, you want that so dont get any ideas lol .. slightly tilted back and straight side to side is good, just twist it to leave a little spot of grease to mark where it is on the counter .... now get your drill and a 1/4" bit and do it .. if you did it right the hole will be under the base and inside the outer edge of the gasket so will be hid with any future changeouts, and wont leak without a flood on the counter anyway .. finally the drain actuator rod may need to be cut, mine hit the wall so trimmed it a bit, but with careful placement of the pull rod adjust points i managed to get a solid feeling jiggle-free pull rod that fits ... - other assembly notes are with the drain pipe use the teflon tape 'TWO WRAPS' each at the very top of the threads and just below the overflow cutouts with the seal pulled down below it then pushed back up over it ... under the drain top you need a bead of silicone 'in the corner' all the way around about the size it would be coming out of a caulk gun with no tip 3/8" or so, nice big fat one .. - just to say it, the inner assembly 'is' plastic so i'd use reserved horsepower tightening both the hold-downs and the lines ..

Bought this for our guest bath redo. I didn’t want to break the bank on this redo so I was intentional about finding something inexpensive. It’s a touch more than I wanted to spend but worth it. I needed something with the pull up drain spout because I don’t want to replace the one I have just yet. It came with a new spout but I kept the old one for now and they connected just fine. One negative is it does feel a tad on the flimsy side but for the money and the look it’s just fine. Highly recommend.

Easy to install color is beautiful and the square shape different

I bought not 1, but 2 of these to install in my master bath. Instructions were easy to follow. Faucets are of very high quality, definitely look more expensive than they are. Two suggestions, take the time to replace your feed lines as well. New ones are not included and re-using your old ones are just asking for trouble. Mine leaked so a quick run to the hardware store and less than $25 for 4 new lines and I was good to go. Also, use actual wrenches instead of an adjustable one, makes the install that much easier.

Easy to install on a normal thick type sink. But If your sink is thin type, you will need extenders to be able to install it as intended. I went to Home Depot and got the extenders needed and it was put in and works really well. I think this may be why it isn't in stock any more because people ordering it couldn't get it to tighten enough as intended. I mentioned this to the company that they needed to include extenders in case those of us with thin type sinks would be able to install with out a problem. As for usability, it's great! Nice to have the swivel faucet and move it like most kitchen faucets do. Makes it easier to do your thing in the sink. It's possible to wash your hair in the sink with the faucet being high enough. That's how convenient it is. Toothbrushing is easy and less messy. All of us here in our home are happy with it.

These are the best and so affordable . Pay attention to what size you need I just ordered initially and did not pay attention to the width 4 or 8 inch - and ofcourse I needed 4 inch . All good now . My plumber is ready to roll . Love these Love the shape of the faucet !

Cumplió con su función y se instaló sin ningún problema.

J’ai installée ces fauchets (x2) dans notre salle de bain principale. Après deux ans ils sont toujours en très bon état. Leur aspect est très beau. Le rapport qualité prix est excellent. Mon conjoint dit que l’installation était relativement facile. Je recommande.

Este producto me sorprendió, es realmente bonito, diseño elegante. La calidad súper.

Easy to install for me first time to change faucet, it looks nice turn out, but there’s no supply lines, after I installed then found out missing the supply lines, and need to go buy 2 supply lines

Really happy with this product- it's extremely well made and easy to install. The instructions are staright-forward, all you need (minus wrenches) comes in the package, and the final product looks great! I love how the spout articulates!