Flexible P-Trap for 1-1/2" Drain Pipes (White - 39 Inch Length) with Adjustable Connections for Kitchen Sinks and Shampoo Bowls, Compatible with Various Sink Configurations

I never write reviews but I felt compelled to write one for this product. I have been remodeling my house on my own and, as you can imagine, i’ve run into problems more than things that have worked smoothly. That is especially true with the new guest bathroom vanity. Aside from the fact that the supply lines were completely wrong, replacement parts not available and the supply valves weren’t compatible (all which stumped the experts at Home Depot, Lowe’s and ACE hardware) the placement of the vanity was not the same as the one I had removed making the plumbing impossible to fit. I had resolved myself to calling a plumber but decided to see if there was a kit on amazon I could try. I ran across this product and decided that, for less than $20.00, I would give it one last shot. The pipe was delivered the next day and within 5 minutes I had a working sink!! This is the easiest thing to use EVER! I don’t know if I would use it for anything other than a bathroom sink (it may not be robust enough to handle a kitchen sink) for my use,it is absolutely brilliant!! I did need to add the 1 1/2 inch to 1 1/4inch reducing piece but you can get those at ACE or on amazon for $2.99. If you don’t know if you need one or not...get one anyway, they are cheap!

What a lifesaver! I installed a new vanity top/sink combo in my basement power room and the drain from the wall was too high (because the sink came down too low) to couple with a standard trap. There was NOTHING I could do aside from some serious plumbing rework (which I could only have done because I have access to the drain from the unfinished side of the basement, otherwise FORGET IT). No food goes down this drain, it's just for washing your hands, so the non-smooth interior doesn't bother me at all. I installed this in minutes and it does not leak. Everyone who pounds their chest about how code says the interior of the pipes need to be smooth is kidding themselves if they think a smooth pipe doesn't trap gunk as well. It comes as one piece with two female 1-1/2" threaded nuts. For a bathroom sink that's got a standard 1-1/4" tailpiece, you'll need to purchase a 1-1/2" slip joint coupling, which you can find at any home improvement store. One end connects directly to the wall drain coupling and the other to the slip joint coupling. Then connect the drain to the tailpipe like you would any trap. I recommend you connect the slip joint to one end of the EasyDrain as step 1. That way you're basically installing everything as one piece and just making your drain connections.

Wow! That's all I need to say really. This product solved my month long bathroom plumbing nightmare. I had new granite counters installed and new sinks last month and decided on sinks that had center drains instead of rear drains like the old sinks I removed. The issue I had was the pipe coming out of the wall had a 45 degree elbow coming off of it and I could not get it off. I was worried I would break the PVC coming out of the wall if I tried to hard to get it off so I decided I would just get another 45 degree to turn it back toward the new drain. This ended up becoming a huge ordeal and none of the parts I bought worked which I returned to ACE Hardware. In the end, I used the expandable & flexible pipe from Amazon and it worked perfectly. I also lucked out and actually needed a female to female which this has. I did end up using a flexible tail pipe extension from ACE Hardware that this connected to and the problem was resolved. This product worked very well, however I am not sure how it will hold up. I can tell it is a little cheaper and lighter feeling but it still connected securely and held its form. I will update this review if any issues ever arise.

I have a Dodge camper van and did the plumbing myself. I had another type of drain that started leaking a while ago. I bought this replacement hose and installed it myself (I'm a 67-year-old woman). At first, I couldn't get the thing to screw in to the sink bottom without it turning at an angle (why I gave it 4 starts for installation). I continued to work at it until it would screw it on straight. I used only my hands, as recommended. It did leak a tiny bit at first but then I tightened it a bit more and all is well. I don't have a lot of confidence that the plastic is going to last forever but for the next couple of years, I don't think there will be a problem.

This was a lifesaver and solved a BIG issue in my apartment, incredible buy and exactly as described and viewed. The only problem I had recently is the year I had it, it was fine, the hose itself is great its very flexible, first problem I woke up to my bathroom flooded to have been revealed that the connector is apparently a cheap plastic that didn't last that long, it cracked at the top that holds the hoses together in place, which I was lucky I have a friend that had an extra Connector so it was able to pop off with some force and applied a new one on and resealed the connectors and seems to work fine again, just keep in mind, if you go to this hose, keep extra Screw Connectors on the side so when they crack you have spares at hand to fix. I would have given it all stars till the screw connector cracked. The new connector is better and has two outer end pieces so its easier to screw tighter. So now it deserves a three star rating

DO NOT BUY!! Horrible quality. The threaded plastic nuts are weak and deform. Nothing but leaks no matter how you tighten it and what washers you use. It flooded under our sink multiple times and caused lots of damage. Do NOT BUY!!!

Idont write much reviews but this needed one....I tried to do plumbing myself went to hardware store and was shown like a 100 ways how to vent my kitchen system...after spending about $200 in parts, and lots leaks about to give up and call a plumber....this thing came in clutch...it's the second time I bought this item...the first one didn't fail I was just replacing everything instead of cleaning it out....this was adjustable very easily to my liking and my kitchen sink hasn't leaked a drop for the first time in 20 years....don't know how others feel about it, but my problems was solved in 5 minutes after failing to install the other kits sold by hardware stores...maybe plumbers will laugh at me for getting this but hey as long as it gets the job donez on to the next one...

The Good: I literally installed this in five minutes. It was very simple and most importantly, it worked. The price is also very affordable. The Bad: The tubing is cheaply made. I have concerns about the longevity of this product over the long term. Ultimately, so far so good. I will have to see if it works months from now and I will edit the review accordingly if something goes wrong.

I had a very unique situation to use this where the P-Trap already existed, but I needed to reach the top of the sink drain screw top, and I have a SaniShower pump drain using the same P-trap, so there can be pressurized shower waste water blasting in the drain pipe that can force some of the water up the sink drain. So with a sharp downward slop from my sink/tub with this flex pipe, and all its ribbing, it stops the SaniShower pump water from coming back up into the laundry tub. Awesome, solved the problem. The Tub drain was also very off set from the P-Trap screw cap and the height of the tub drain bottom also had to be adjusted up to give enough downward slope for this flex pipe. I removed the old stand pipe, and screwed directly onto the tub drain bottom. Worked out perfectly. Easy to use, no tools, no Teflon tape, hand tight, no sealant, just the provided seal ring, worked perfect. It is a bit light weight, or flimsy looking, but if it gets a crack or hole, I use black pure rubber plumbers repair tape or GOOP to fix it, until I can get a replacement item, that is cheap, and takes 60 seconds to install. Too easy.

Saw some complaints online talking about that this type of drain pipe is easy to get clogged because of its wrinkles design. However look at the bright side that it is a twisting joint and there is no plumbing glue to be used. Therefore it should be easy to be twisted off. Thus it should not be difficult to clean considering also that it is a flexible pipe that you could easily bend it in any way you want and clean its interior tunnel conveniently. Personally I don’t see a big issue there currently.

Really bad quality, the hose tie thing is too flimsy to hold it up in a u shape and it’s just a waste of money.

Great Pipes , fir perfectly!!!

Sturdy and reliable. However, the price feels a bit steep for just a mounting plate.