Ergonomic Office Chair, High Back Mesh Swivel Computer Chair, Executive Office Desk Chairs, with Adjustable Lumbar Support/2D Headrest/Lockable Backrest, OC3 Air, Gray

Very durable and ergonomic, easy to assemble and disassemble. Wish the seat was bigger length wise, it leaves a gap of 2 inch between my knees and upper thigh and I'm 5 foot 11 inches tall, has good lumbar support. The nylon is a saver, makes it breathable and comfortable, height and armrest are adjustable

I selected this chair for its open mesh seat, simply because I'm tired of butt-sweats. 'Nuf said. All the other office chairs with this construction were more expensive, many having flaws I wanted to avoid, with the only good competition being around double the price of this chair. So I ordered it, with more than a little fear that this price was 'too good to be true" for a chair like this. My chair arrived yesterday, and I had it assembled and clean-up done in half an hour. It is exactly as described, though the description couldn't possible convey all the "little things" that become evident after sitting in it for a while. Not surprisingly, whatever that thing is behind the lower back has nothing to do with lumbar support: It is impossible for it to touch the fabric no matter how hard you lean into it. Which isn't at all a bad thing! The back of the chair is wonderfully curved, and has no need for additional lumbar support. My only complaint is I see no straightforward way to remove it: The chair would look better without it, and maybe it could be sold slightly cheaper as well. Speaking of wasted plastic, what's with that coat hanger on the back? It is part of the mount for the headrest, so it can't be left out during assembly. Could be an opportunity to save another buck. Then again, what if that's not what it is? Could it be push handles for Office Jousting? Will have to give that a try right after COVID ends. There are other minor nits to pick, such as the arm rests not being adjustable forward. But I knew that before I bought it, and I think I can live without that feature. I was also surprised to find the seat can't tilt, not even by adjusting the screws during assembly. But after sitting in it, I learned this tilt wasn't necessary: The seat mesh yields in just the right way to make that adjustment unnecessary, for me at least. Finally, there is just one real flaw that irks me: The back doesn't go completely vertical, which is important for me to be comfortable at a keyboard. I mean, who needs a chair that can recline that far back? Give me more vertical instead! Fortunately, I own a 3D printer can can design and print mounting wedges to fix this. May need to get longer bolts too, which is easy enough. But if you need a chair with a back that can go truly vertical, this chair may not be for you. However, the gas lifter is just right: The chair being replaced could never go quite high enough for me. This one does! The castors, while inexpensive, are wide enough to not dig deeply into carpet, another improvement over my old chair. The mesh material in the seat and back is everything I hoped it would be. Overall, this is a fantastic chair punching way above its price class, even allowing for the minor fix I'll be doing. To address the other minor issues mentioned above you'd have to spend at least an additional 50%, more likely double.

All of the hardware was very good quality. The steel components are thick and plenty strong. The plastic parts were thick and strong too. This should be a durable chair. The integral coat hanger seems a bit goofy for home office use, but I may find a use for it. It's not in the way so it's not a problem. It would be nice if the assembly instructions were larger with bold print so I didn't need to use a magnifying lens for my old eyes. The fasteners should have been bagged for each step instead of all loose in the box for me to sort and divine which fasteners went where. The instructions were no help here either. I left the arm rests off the previous two office chairs but I installed them this time. The hard plastic is slick and my forearms slide off to the outside. The main reason I installed them was to complement a couple of nice features on the new chair. It has a headrest and it reclines. Without a headrest I could never use the reclining feature. I thought the arm rests would make it more comfortable to recline, so my arms had some support. I'm 6' 2", and even in the highest position, the headrest hits me on my shoulders and the base of my neck when sitting upright, which is a minor annoyance, but when I recline it supports my head almost as high as I'd like it to be. This chair is comfortable enough when reclining that I can sleep in it when I lower the seat so the floor acts as a footrest. My office is hot in the summer so the all mesh construction should be more comfortable in the warmer months, in addition to being more durable with no foam to compress and break down over time. I can easily clean it with soap and water if needed but the plastic mesh should be stain resistant. This mesh chair should look new longer than a fabric covered foam chair. I may 3D print some rubbery slip on covers for the slick hard plastic armrests.

Just what I needed! The mesh chair seat is comfortable. Set up was quick and easy. I like that it can lean back and also be locked into place. I got this chair to replace a chair I bought last month that had an uncomfortable seat cushion. This is great!

Love the chair. It wasn't too hard to assemble. Good easy to understand directions. Comes with tools so you don't need anything else. The height is variable and I don't even use at the highest setting. Very sturdy

Update: I had decided to buy a separate lumbar support pillow to work with this chair to make it comfortable and supportive. Just keep in mind you may need to do so if you require this type of support. Original: I do not typically like to leave negativity in my reviews for products. Overall I would say this chair is a good chair. The only issue is that I was looking for an office chair that would offer me a decent amount of lumbar support. In the pictures, it does look like this chair will do that. Although in reality, the part that serves as the “passive lumbar support” does not even l touch your back when you sit down as others have mentioned here. In fact, there is about two inches worth of room between your back and the lumbar support. I contacted the seller and even sent pictures, and they just kept telling me I can adjust the lumbar support up and down as needed. Which, as you can imagine, does nothing. I am torn as to whether I would like to return this product because as others have mentioned in their reviews it’s not the easiest thing to put together. In addition, the rest of the actual chair itself is pretty comfortable and well made. In order to get around the lack of lumbar support, I was able to stuff a small pillow in between the back of the chair and where the lumbar support is supposed to be. I am going to see if this works for a few days, and if not this product will be going back. It would be nice if the sellers would try to sympathize with the buyers a little bit when a product is not what they are advertising it to be.

I caught this chair on sale. I was hunting for a chair that resembles office chairs I've used in the past. This mesh feels very strong, and gives a lot of support. The look is sleek and clean, it provides great long-sitting comfort. I bought some of those roller-blade style wheels and it rolls amazing with them. I loved this chair so much, I bought two more for family. All three have held up for a long time, and have grown with kids. The headrest is adjustable, which is a nice bonus for the little ones as they get taller. I highly recommend this for work-at-home, or even lounging in for a few hours after a long days work, while you're taking care of business.

I don't get what people are complaining about with the instructions, it says the screws are in the headrest, and they were, in fact, in the headrest. Sure, assembly isn't as easy and putting two Legos together, but if you seriously had issues assembling this maybe you shouldn't be assembling furniture. The bolts DO NOT go into slots, but they pass THROUGH slots so you can adjust the depth of the bottom cushion slightly. Anyone with shorter legs should appreciate that. The only thing I found slightly wonky is that the headrest itself must remain inserted into it's bracket before you attach the bottom half hanger that clamps it to the chairback. If you try to slide it up and down before it's mounted it will push the locking tabs out of the tube, but if you're even basically mechanically inclined you can easily put them back in in seconds. As for the chair itself my biggest concern was the stability of the armrests as these pillar mount style ones are notorious for being wobbly. Thankfully, these ones aren't and I'm assuming it's due to the very stout mounting system that wraps under the bottom. There's a slight amount of movement due to the adjustable height but nowhere near enough that it's distracting. I've seen none better and many that were FAR worse. Height comes up well above where I would want it so I can only assume anyone complaining about the low armrests either don't know how to raise them or they're extraordinarily tall which neither is the chair's fault. (I will never understand why people that are very tall or overweight magically expect all seating to accommodate them.) The mesh is nice and cool and the adjustable lumbar makes it easy to put it exactly where you need it for your height. As someone that's always replaced the wheels on my office chairs even the wheels were of a higher quality than average so these just might stay. Considering high back mesh chairs have always started out at $200 this chair ended up being nicer than I hoped, let alone expected. It's brand new though so if I encounter any problems I'll update this review later. I know how difficult it can be to find a chair that's decent quality and comfortable. UPDATE: Ironic that I was concerned about the armrests, as after a year one of them snapped off right where the bolts go through it. They claim the armrests are tested and rated up to 170lbs, but there's no way the armrest ever saw more than 100lbs. Still waiting on Flexispot to respond if it will be warrantied or even let my buy a replacement as now the whopping 1yr warrantee is up. If a $180 chair can't last a measly year it doesn't matter if it's comfortable or not when I've had $80 chairs that didn't break so quickly. It's one thing if you don't like a product's design or comfort, but this is straight up bad quality and unforgiveable on a name brand chair. Even if they do replace the armrest how long til that one or the other one breaks off?

Ich hatte das Vergnügen, den Flexispot Bürostuhl auszuprobieren und ich bin beeindruckt von seinem rückenfreundlichen Design und seinen vielen verstellbaren Optionen. Die integrierte Lordosenstütze ist eine ausgezeichnete Funktion, um Rückenschmerzen zu lindern, da sie eine bessere Unterstützung für den unteren Rücken bietet und dadurch Sitzermüdung reduziert. Ich war in der Lage, länger ohne Schmerzen zu sitzen, was ein großer Vorteil für diejenigen ist, die lange Stunden am Schreibtisch verbringen. Der Stuhl ist sehr anpassungsfähig und bietet viele verstellbare Optionen. Die Kopfstütze kann in Höhe und Neigung verstellt werden, so dass sie perfekt an die Größe und Sitzposition angepasst werden kann. Die Sitztiefe ist auch individuell anpassbar, so dass man den Sitzkomfort optimieren kann. Ein weiterer Vorteil des Flexispot Bürostuhls ist seine atmungsaktive und abriebfeste Sitzfläche aus Netzstoff und gepolsterter Sitzfläche. Dies sorgt für ein angenehmes Sitzerlebnis, auch bei längeren Sitzperioden, und verhindert Schwitzen. Darüber hinaus ist der Stuhl auch sehr robust und langlebig mit einer Tragfähigkeit von bis zu 100 kg. Der vierstufige Leitungssteuerungsmechanismus mit Neigungsspannung ermöglicht es, die Rückenlehne in verschiedenen Winkeln einzustellen, um eine bequeme Sitzposition zu finden. Man kann zwischen einer geraden Sitzposition und einer Neigung von 90-120 Grad wählen, was sehr praktisch ist. Ich persönlich hatte Probleme mit Rückenschmerzen und ich war auf der Suche nach einem ergonomischen Bürostuhl, der meine Beschwerden lindern würde. Der Flexispot Bürostuhl hat meine Erwartungen übertroffen und ich kann mit Sicherheit sagen, dass ich keine weiteren Probleme mehr habe, seitdem ich diesen Stuhl benutze. Ich empfehle den Flexispot Bürostuhl jedem, der nach einem hochwertigen und bequemen Bürostuhl sucht, der Rückenprobleme lindern kann.

Seems great

-Entrega: Correcta, dentro de lo estimado. -La quería gris pero la tuve que pedir negra (no había stock de la gris según la web) y me llegó gris. -Embalaje: Un desastre, todo metido en la caja sin ningún tipo de orden. -Materiales: Se ven decentes aun siendo plástico en un 95%, lo único metálico es el sistema de reclinado y el amortiguador. Solo el tiempo dirá como se comportan con el desgaste. -La malla es correcta, no es la mejor pero parece resistente. -El reposacabezas es un desastre, se mueve muchísimo y el perchero no se puede quitar, si quieres reposacabezas vas a tener que montar el perchero sí os sí. Me parece una decisión terrible. -Las ruedas no son nada del otro mundo, ni las he montado, tenía unas de silicona tipo patines roller con freno y sin dudarlo son las que he montado. -Tema ergo: Bien, te obliga a poner la espalda de forma correcta aunque la sujeción lumbar no es nada del otro mundo. Por el precio no está mal, pero tiene muchas cosas a mejorar.

Best quality

Je suis assez grand, 1m90 et l'appui-tête doit être réglé en position haute. La plus haute possible et du coup il ne tient pas très bien, c'est à dire qu'il sort régulièrement. Autre assise ok, usage depuis 1an, ne couine pas. Accoudoir simple mais ok aussi. Une étoile en moins pour l'appuie-tête.