hikotor Steering Wheel Mounted Cruise Control Switch Button Kit with Cable Replacement for Ford Explorer Sport Trac Ranger F150 Mercury Mountaineer Mazda B3000 Fits to F87Z9C888BB SW-5928 F87A9D809BA

My new switch came with a misprint on the "SET/ACCEL" switch, and had small scratches and gouges on the "ON/OFF" switch. I wasn't terribly worried with it since my truck has it's fair share of scratches and this switch will fit right in. The install only took me about 30 minutes and was pretty straight forward. You don't have to pull the whole steering wheel off, you're able to run the cables through the two cracks on the top of the back case of the steering wheel (if that makes sense). Make sure you disconnect your battery 30 minutes prior to replacing these. All in all I'm happy with these! They work great.

Worked great on my 1996 Exploder, even though Amazon claimed it did not. The difference between 96-97 models and later ones is that the lights are a different color. Everything works like it should. The back lights do appear brighter on one side (left) but considering the huge price difference in these and the ridiculously expensive Ford part, some compromises are to be expected. And in any case, these are a vast improvement over what they looked like before replacement. All buttons work as they should.

When I was reinstalling it I couldn't see on the far side of the steering wheel but I pinch the ribbon with the airbag bolt and it made the horn go off constantly. Figured it out pretty quick. Went for a test drive and was able to get it to work though it did seem slightly intermittent, not sure if it's because I slightly damage the ribbon cable or the product as sometimes when I push the set button the back lights on all the buttons go out instead of the button working. And so far haven't gotten the resume button to work. However I have to assume that it's the damage that I did to it rather than a defect in the product. The path of the ribbon put it really close to where you put the bolt through to bolt the airbag to the steering wheel on the side of the steering wheel. be very careful when you go to both the airbag in is that the big washer on the airbag bolt doesn't catch the edge of the ribbon cable.

lightening fast delivery, not too bad to install. plugs to switches are not keyed, however, and one needs to remove both switches to run the harness. got the on/off switch pin pushed in upside down (therefore backwards) because of no keys on connectors and because i was a ninny and don't have a smart phone, and didn't take pictures. my fault. so when i reconnected the battery, the horn blew constantly. when i reasoned it out, i switched the pin over to the correct connection and the f150 now has cruise control and the horn works only when pressed. thanks so much!!!!!

didn’t even need the wiring harness my factory harness was in perfect condition so it was as simple as mounting the pieces in and plugging them in took in whole about 7-8 minutes (also disconnected the negative battery terminal because to loosen the airbag it kept honking my horn lol) great product would purchase again if the need ever came about

Buy these and watch the vids on you tube for installation instructions....took less than one hour to get them replaced.... disconnect the battery before starting the project so you don't cause an Air Bag incident!...you may need a small Metric Socket set.

Perfect fit for my 2002 Ford Explorer Sport. Switches look perfect and feels very nice. In case you're wondering, they do light up green when you turn your foglights/headlights on. Just make sure you have a good steering wheel puller, as mine took a 5-ton jaw puller and all my strength to take off haha

I have a 2003 Mazda B3000 which I use mainly as a work truck or to carry things around that wont normally fit in my sedans. The steering wheel was all eaten up (previous owner had a dog) and I always hated how it looked so I purchased a new steering wheel which unfortunately did not come with these side buttons which I then found on Amazon and decided to purchase them. Cheap aftermarket buttons but work like a charm and no issues!

They don’t work