EVIL ENERGY 10 Row Oil Cooler Kit, 10AN Engine Cooler Radiator Universal

Works great so far no leaks, will update if I have a failure

Purchased it for a 95 Talon TSI but have since ditched the sandwich adapter for an oil filter relocater. The fittings are pretty basic, the hoses are cheap but they are easy to trim to length and are more than adequate, the cooler is sturdy, and the sandwich plate is good but the included oring is iffy. Idk if it works TBH. When I first installed the unit it bottomed out around the oring with a quarter turn of the nut after contacting the oring. Bad seal? Maybe. Run to Walmart and purchase a fram ph4386 filter. Chuck that origional oring out because the gasket from that filter works perfectly (keep the filter so you don't forget). I feel like many of the bad reviews are from people who did not take the time to look things over before installing them. Take things apart and inspect them before installing. I have been using this product for almost a year now with absolutely 0 issues on an oil system that sees up to 100psi at redline.

Exelente como mismmo lo vi

If you have a 2003-9 Corolla or anything with the 1zzfe engine, the sandwich plate does not fit and you will need to purchase a smaller one. Everything came as described, super easy to find a mounting spot. The sandwich plate’s outer gasket is larger than the filter housing making it leak.

Put this on my 87 Buick GN. Connected to factory remote mount oil filter plate. Did not use the supplied plate. Hoses reached to the front on the AC condenser perfectly. I did have to purchase 2 additional 90° AN fittings, but no fault of EVIL. Uses approximately 1Qt of oil capacity (top off after first warm up). I am now a huge fan of EVIL kits and intend on purchasing their fuel kit next.

Worked for a while, I only drive 5-20 miles at any given time. Well i took a little road trip into the mountains and desert (200 miles). When I came back home, there was a puddle of oil on my driveway. I figured it might just be a fitting on the hose that jostled loose. Tighten the fitting connected to the nipple on the cooler. Drove around a few more miles and it gotten progressively worse. Found out it was the actual cooler itself that was leaking from where it connects to the nipple. The pressure from the extended drive caused it to burst? Who knows, I was lucky that I didnt loose that much oil I was on my road trip (lost half a quart). Seems like a common factor among reviewers, quality check is lacking. Stay away from this brand, I've bought an lines and an fittings including this cooler and it all leaks one way or another but no more. Buy elsewhere before it costs you an engine replacement.

This kit is NOT universal. The adapter plate doesn't fit the oil filter location on the older style SBC 350 engines. Aside from this issue, the kit appeared to be good quality. I wish the seller had a different model to fit the SBC 350 engines. I believe this could have been installed but it would require a smaller oil filter than stock. This didn't set well with me so I returned the kit.

Fits a 370z if you mount it on the passenger side. It is a very tight fit but that also makes it easy to secure once you get it in. It really makes a difference and runs cooler, and does not leak. I bought the mounting plate but didn’t end up needing it. If you like to take your car to the track and don’t want to pay for a brand name oil cooler- this works. I think these are one of the most marked up items . Install was pretty painless for me but maybe medium difficulty for newer driveway mechanics. And, there are no instructions FYI

8 oz. oil cooler- Well, maybe 200 km no leaks so far , all hoses fit & looks good.

Absolutely great quality.

Installed in my 325i street/track car and was honestly amazed not to have any leaks seems sturdy over a year later and a couple track days .very happy with it. Would buy again.

Easy install, nice hose's, well built.

Très bien