Crankbrothers Dunarri Speedier Lever , Black

This tool is amazing, It take tire changing and flat repairs to the next level.. I was on a 62 mile ride caught a flat around 23 miles into the ride, I told the pelelton to go ahead, The tool work so well.I was able to change my inner tube air u p my tire put my tire back on the bike put my stuff away and catch up to the pelelton. HI 5 to this tool.

I've used 8 inch metal and plastic tire levers for a LONG time and they work OK but you have to be careful with them because it's easy to pinch a tube between the rim and the metal lever. Metal and even plastic levers can also scratch rims pretty quickly and I'd NEVER use a metal lever on a carbon fiber wheel.This Crankbrothers speedier lever is an excellent alternative to metal levers. I've removed and replaced 10 tires with this handy little tool since it arrived. This lever is solidly built, thoughtfully designed and is small enough to keep on a road bike for a field tube change or tire replacement.I utilize re-usable zip ties to speed things up with certain tires (see photo). I'll get one part of the tire and tube seated, zip it in place and move around the tire with this lever and then air up the tire after removing the zip ties. This lever is faster than dual metal levels and easier as well. I also occasionally use water based golf grip solvent as a lubricant for the tire bead - soapy water works as well. It helps the lever slide easier.I'm going to buy a couple more of these for the shop and my other cycle. Hope that helps!

I've got this after spending several hours trying to pull on 30mm tubeless P-Zeros on 25mm wide hookless rims using regular levers and a bead jack.While, unsurprisingly, it was not able to pull on these tires by itself, I succeeded in using it to hold the bead from slipping on one side and managed to finally pull on the tires with a bead jack. There are clamps that do the same and cost $15 or there is this lever for less than half.And it works great for pulling tires off. Also great to pull on tires, which are not extremely tight.

This lever does work and is better than traditional levers. With that said it is a bit awkward in terms of hand position and as noted by others the hook for mounting is too thin and looks like it will break easily. I bought this and a tyre monkey at the same time to try both and recommend the tyre monkey hands down. It may be 3x the price but the tyre monkey is much easier to use and I think will be much more durable.

I love this tool! No more levers for me. I keep this in all my saddle bags. Absolutely the best for removing and installing bike tires, especially when trail riding.

A great multi tool for your bike bag. Very durable and works well! Recommended.

This tire lever is AMAZING. I was skeptical on ordering, so as soon as I got it I immediately tested it on the hardest tire/wheel combo I have ever encountered. I literally broke 4 of my favorite levers getting these set up, and it took 30-40 minutes of hard, frustrating work to get the job done. (Typically to get a tire off, change a tube and remount a tire it is about 1.5- 2 min, rarely more than 5 for a difficult tire and/or rim). I was very nervous to do this test, as I never wanted to experience what I went through to mount these again! A quick look at the lever, and what wasn’t clear in the pictures was immediately obvious in how to use the product, 1 end to remove a tire, the other end to mount the tire. First the removal- which took about 10 minutes with a very good set of levers. Using just one of these the bead was out, off and tire/tube removed in under 20 SECONDS! I could not believe how easy and fast it was. This would be very easy for most women riders I know. Next up mounting- this was unbelievable hard with standard levers, particularly the last 5-6 inches which were crazy tight. Switched tool ends, snapped the tool into the wheel bead, and pulled the tool around the wheel. The tool pushes the bead of the tire over and into the rim as you go, and makes it virtually impossible to pinch the tube, which is particularly great with latex tubes, which is what I use. Up until the last 5 inches it was incredibly fast and easy, but as I got to the crazy hard part it there was definitely more resistance, and I had to use my left hand to assist in pulling the bead up. For me, this was slightly hard, but very manageable. 30 seconds and tire was mounted! I absolutely could not believe. Just to confirm it was not luck, I removed and remounted the tire 3 more times, each one similar or better time than the first effort. I went from the despair of feeling I was going to have to give up on what my research showed was far and away the best tire for my wheel, to the elation that $ 8 bucks can allow me to deal with ANY tire wheel combo quickly and reliably. For easy tire/wheel applications there are a lot of good lever options, but for difficult applications there is nothing better than this tool. While it is light, it is a little bulky, but absolutely worth finding a way to add it to your kit!