Handlebar Risers

Fits as advertised, I had to get smaller bolts for my crf110 as it mentioned in description, other than that it was a easy install and clamps tight on the bars, so far bars have stayed in position even on hard landings.

Installed 20mm risers on Honda Trail 125. Only used risers and stainless steel screws that came with kit. Kept original Honda top plate and screw head caps.Fit perfect, no modifications. Makes riding in standing position more comfortable.

These 22mm risers were easy to install, look great, and work perfectly on my 2017 KLR650 with the OEM cables. I had previously installed similar 30mm risers on my bike and those sort of worked, but the cables were tightly stretched, and when the handle bars were fully turned sometimes it would pull on the throttle cable and cause the engine to speed up, or pull hard on the clutch and choke cables. These being 8mm shorter worked perfectly without putting excessive tension on any of the cables at full turn in either direction. You may still need to fiddle with the cables a little to get it just right, but you can.

Purchased for my stock 2023 Grom. Installed without any modifications. Fits perfectly on stock bars.

The bolt were way to long not a big deal just sawed off about 1/8 inch off work just fine.

Just enough of a rise to keep me from being hunched over too much while standing and riding without compromising the handling/geometry of the bike. Also, they are super duper easy to install! Just make sure your throttle/brake cables are long enough to accommodate the rise.

2023 XPro X7 ( Honda Grom clone)Risers fit perfectly but the bolts included are about 1/8” too long. Therefore, these are useless unless I use washers.

Bought these for my Baja dr49, had to shave the bolts down and rethread them to make fit but works perfectly

J'ai un crf250l 2020 , ça fit parfaitement, facile d'installation, rehausse le guidon à la hauteur dont j'avais besoin et les câbles ne sont pas tendu

Excellent produit.