ZhanmaiZhanmai 12 Pairs Vampire Teeth Costume 4 Size Fake Fangs with 2 Tooth Pellets for Cosplay Props Halloween Party Accessories Masquerade Dentures Makeup Dress up Favors

The reviews are all true. The only thing i have to add is, i had to grind down the back of the fangs so i could close my teeth. I used nail clippers to cut off the back, then a rotary tool with a grinding bit to flatten it.I received 3 pair of each size, 13,15,17,19mm and 2 capsules full of beads.Points from other reviewers that worked for me:- don’t wait till the last min to fit them- the beads don’t adhere them, only create a custom mould for your gums- you must use denture cream/paste to stick them on- a toothpick worked excellent to gather the softened beads- don’t put more beads in hot water than you need for one fang, 6-12- you can put the tooth in hot water if you need to adjust after it cools

The teeth have very good different lengths, but can give you a small lisp with the medium and especially large ones. Specifically with CH’s and SH’s. Needs WAY more adhesive beads, but for the amount of teeth and amount of beads its pretty okay. Wax is very hot to the touch so please be careful, but they look very nice. But as others have mentioned, unless your teeth are on the whiter side you can’t do much to make them match. Even me, as a very white-toothed person, had a struggle with the colour matching. I saw one person try to put it in coffee for a few days, but it didn’t do much to nothing. You can drink with them but not eat!! I didn’t expect to be able to eat with them though. Somewhat tricky to put on, but once done, all in all it is a very nice look.

Trust me, I nearly gave up several times and came up with alternative fangs for my cosplay. I have never used anything like these before and struggled with getting them to work. Thanks to other reviews here and tips from the web, I have three sets ready for my costume. Here are my tips in hopes of helping others!- Super hot water, about 2 min in microwave and transferred to travel coffee cup to keep it hot, so I could work where I have a mirror. A small glass dish to heat the silicon beads with small amounts of hot water for each tooth.- Have a cup of ice water nearby- Each fang used about 10 beads. Heat beads in water until completely clear. Collect all on a toothpick and transfer to the fang. Press some inside with fingers and the rest above the top.- Press fang to tooth, push the excess clear silicon UP to create a gum-shaped flat piece that will tuck under upper lip and secure it. Once in place and comfortable, the silicon creating a shell along the gum, take some ice water into your mouth and hold it where the fang is. This will quick set the silicon and cool it much faster. Check the color and once the silicon is back to white or close to it, carefully pull the fang down by finding the top of the silicon high in the gums and slip off.- Set aside to completely finish setting. The finished fang will be white and have a mould perfectly shaped for that tooth and gum area. It can be taken in and out easily, you should be able to talk and drink easily.- NOTE: Each will have a unique shape so be sure to label Left and Right. I keep them in small plastic bags with the size and side written on it.Hope this helps!!! I’m so pleased with the results!

got these for Halloween and had to try a few times to get them to stay on (so i ended up wasting a few pair). most important thing to know is that you should do a trial run with a pair (or two) before u really want them for a costume etc. best tips: directions say to place a small amount of heated pellets into the fang tooth first then press in but, i found the best way is to mold it to YOUR OWN tooth FIRST, covering the entire tooth and even into the side crevices, and the back of yr tooth too. MAKE SURE YOUR OWN TOOTH IS VERY DRY ALSO before applying the melted adhesive. then, quickly, brush some spirit gum onto the adhesive (u can buy that separately on Amazon) which will make it stick much better, and quickly press in the fang and hold it there WITHOUT MOVING!... for a good 2 minutes. either way, you do have to work fairly quickly in all steps bc the adhesive hardens pretty fast. as for melting the pellets, best to (carefully) use almost BOILING water, but use very little into a shallow bowl, so its easy to retrieve the melted bits. oh, and they clump together in the water too, so it takes some practice. use a tiny spoon or even some old tweezers to get them out. i dont recommend microwaving them, they get too sticky and gooey. sounds like a lot and well, it kind of is, but u should get the fang of it, i mean hang of it. you dont want them falling out, etc. oh and lastly eating and drinking w them in? just DONT.

These didn't work at all for me. I followed the instructions to a tee but still couldn't get them to stay on. I threw them away.

The fangs are quality and if you use 15 pellets per fang you can make a great mold that fits in between your teeth and gums. I placed the pellets into a mug. Poured about a quarter cup of boiling water of the pellets. Then I used a small metal spoon to form a ball/glob while they were in the mug. Then lifted the glob up and using the tiny spoon placed it into the fang. I quickly put the fang over my tooth. Started pressing the waxy substance over and behind my neighboring teeth by the fang. Let the fang sit and harden a good ten minutes then you can pop it off your tooth gently. I did ONE fang at a time. I made two sets for my vampire costume. They are able to be pre-made/molded then I placed each pair into a zip lock bag and they fit snug like a dentist would make a temporary false tooth. Very satisfied with this purchase. I think they look real and are reasonably priced. I have to admit I am having a lot of fun with them and I have not even dressed in my costume yet! lol