2Pcs 30cm M.2 U.FL IPX4 to RP-SMA Female Antenna Connector IPEX4 MHF4 WiFi Pigtail Cable for M2 NGFF WLAN Card AX200NGW 9560 9260 8265 8260 7265 7260

I previously tried using 2 different connectors that didn't work well. These ones connect easily and are snug.

Got this for my Asrock Z390 Extreme 4 board which has a wifi card slot but didn't come with antenna thingies. This worked perfectly and the product description from this seller does a great job identifying the smaller connectors that the latest m2 wifi cards use, vs the slightly larger ones that older cards use. Make sure you look at the images carefully!

Easy install. Added a pair of external antennae to this build with an Intel AX200 M.2 2230 Wi-Fi 6 card. Mobo is an ASRock Z90M Phantom Gaming 4. Case is Cooler Master MasterBox Q300L MicroATX. Works with Bluetooth and Wi-Fi. Pics show the exterior and interior of how I mounted them to the Q300L case.

I purchased this product to attach to the Intel 9560 CNVi chip. It works perfectly; my tower now has both wireless and Bluetooth signals, and I was able to easily route the leads to some vent holes in the back of my case (and attach two antennas from an old disused router).

Used to attach to an Intel AX200 based m.2 e key wifi adapter that needed to travel across the motherboard to the back of a Lian Li Lancool II case with vertical PCIe Graphics card adapter. There is a convenient opening in the mount that allowed the SMA connectors to thread into and attach an antenna. Looks very clean. Appears OEM to probably most people. This allowed me to add wifi without the need for PCIe slot which was taken up by the vertical mount.

easy to use and strong signal

The connectors definitely do not fit.

I recommend attaching to the case prior to attaching to the wifi card. The connections will often spin the wires which may cause problems if already attached to the card. Use two pliers or other tools on each side of the barrel and it's not hard to tighten it down and then attach the leads to the card.