HUANUO FlowLift™ Dual Monitor Stand, Fully Adjustable Gaming Monitor Desk Mount for 13–32″ Computer Screens, Full Motion VESA 75x75/100x100 with C-Clamp & Grommet Base, Each Arm Holds 4.4 to 19.8 lbs

I don’t even have to say nothing because huanuo is a great brand and speaks volumes for itself but let me just say this I was mind blown such an amazing and sturdy product for the price I thought I’d get something that was difficult to set up which this is not it’s super easy and or made of cheap material which this also is not it’s great sturdy and even heavier which shows you it’s good material! This only thing I don’t like is the maneuverability of moving the monitor left and right as the bracket only allows foward and downward tilt but that is easy to get over you can use this for a top and bottom setup because of the way the arms are but this it perfect for side by side! The size is good doesn’t take up much desk space but creates a lot more since it keeps your monitors looking like they are floating it gives an amazing look to your setup that’s for sure!! The wire management is also pretty good and is easy to use making look nice and clean but if you have fatter cords I would just remove the plastic piece and screw and zip tie it tot he arm instead as i did for my main monitor!

Bought this for my dual monitor setup and it's been rock solid so far. I have it clamped to an Ikea desk (my battlestation setup) and the clamp had no problem gripping the desktop without damaging anything. The gas powered arms work exactly as described. Getting both monitors positioned where I wanted them took maybe a couple minutes of adjusting the tension screws, and once they're set they stay put. No drift, no sag, and I can still reposition a screen with one hand when I want to tilt one toward the rest of the room or swing it out of the way. The biggest win for me is honestly the desk space. Having the area under the monitors completely open changes how usable the desk is. Stuff that used to crowd around the monitor bases now just slides underneath. One minor note: I haven't used the cable management rails yet. You have to detach them from the arm to route the wires through rather than just snapping cables in, and I didn't feel like unplugging everything to do it. Not a dealbreaker at all, just something to know if you're expecting to add cable routing after the fact. I'll probably get to it eventually. Installation was straightforward and everything felt sturdy out of the box. If you have a two monitor setup in the 24-32 inch range I'd recommend this without hesitation.

I purchased the Huanuo Dual Monitor Stand for my Flexispot standing desk and it is easily one of the best upgrades i've made to my desk setup. The arms are smooth and easy to adjust making it effortless to position my monitors exactly where i want them. Installation was very easy with the clamps while they also provide the option to drill into the desk as well. I appreciate the fact that the monitor stand includes some type of cable management system which is very useful is hiding stray wires! Overall this product is great for the price, very durable, and is a very high quality product. I would definitely purchase again.

TLDR: This is a great product, just be mindful of the space you intend to use it in. I purchased this 2 years ago for use with 2, 24 inch monitors. It's been working great and I have pretty much zero complaints with the product as advertised. That being said, I think you may want to really consider if this is right for your setup. I think if you have a L-desk and set it up in the corner, it'd work much better than if you set it up directly on one of the edges (if you don't drill through the table to mount it away from the back of the desk). On my setup, the arms hit against the wall since I don't have an L desk and I mounted it with the provided C clamp mounting hardware, meaning I can't use the full range of motion the way I might like to. I think the other thing about this option instead of 2 independent monitor arms is that there's just a bit less freedom for how you can move both monitors. Since you'll always be playing to a middle ground, you might not be able to have the range you're looking for if you really swing and articulate both monitors a lot instead of having two independently supported monitors.

The build is sturdy. I’ve mounted a 24-inch and a 32-inch monitor in an asymmetrical configuration, and there’s no wobbling whatsoever; it’s securely fastened to the desk and offers excellent stability. Since I installed relatively large monitors, setting them up took a bit of effort, but there were absolutely no difficult parts during assembly or mounting to the desk. The range of motion is exactly as described, allowing me to use a much larger portion of my desk, and I’m satisfied because it’s more convenient—for example, I can move the monitors closer as needed. It doesn’t look particularly high-end, but it doesn’t look cheap either. The appearance is about what you’d expect for the price. Overall, I feel it was worth more than the price.

These independent dual mount arms have been a great change from my old setup. The installation process is pretty self explanatory and not difficult to put together. The arms come in a couple of pieces but instructions were clear. They articulate super well and I even installed one monitor vertically. Both are very large 28” monitors but this product has no problems keeping them in position. The base plate and clamps situation is pretty easy to use and I used an additional metal plate cover to protect the desk just in case. [I recommend especially for desks like mine] I really like the flexibility this mount provides me to adjust the monitors. This is one of those scenarios where once you try this you can’t go back. Very sleek and out of the way.

Super sturdy, fairly straightforward assembly and installation. This dual monitor desk mount easily holds my 2 new 27” monitors. Easily adjustable and it’s great that I have also cleared a bit of space on my desk now that my monitors are lifted off of it.

Not only was this easy to assemble & install, taking just a few minutes, but I can barely even think of anyway it could be improved. The components are primarily cast metal, so for the price the quality seems great. I appreciate that it uses two clamps and a nice big base for connecting to the desk surface - this seems very sturdy and is holding the weight of two monitors just fine. I have a 23" and a 27" mounted. It was lucky that both of my screens had VESA screws from the factory so I didn't need to use the ones included in the kit, but the kit includes everything needed. I also like that there are set screws for every joint, allowing you to tighten down the positioning if you want to. The cable management clips built into the arms are super handy to minimize cord clutter (yes I know there is still a lot of cords in my photo). Here is one thing I will say - the cable management is clearly designed for just 2 cords per screen - 1 power and 1 display. If you wanted to run a power cord and two display cables to a monitor I think it will be quite tight. You might just barely get away with it. For me I ran power, display, and a thin audio cable through and even that was a little bit of a challenge. Still, I'm glad they are there as it does help to hide some of the under-screen cable clutter. Overall this was a slam dunk and I no longer need to use a stack of books to get my 2nd monitor up to the proper height. I should have got one sooner!

Great product and price!

This dual monitor stand worked really well for my setup and was fairly easy to assemble. The instructions were clear enough that the whole installation only took a short time, and all the necessary mounting hardware was included. The build feels solid and stable, even with two monitors attached, and the gas-spring arms move smoothly without sagging. It is simple to adjust height, tilt, and rotation, so getting both screens aligned at a comfortable viewing angle is quick. The stand also helps keep the desk tidy, thanks to the built-in cable management and the way it frees up space under the monitors. Overall, it is a great value if you want a sturdy, flexible dual-monitor arm that is easy to put together and adjust.

I bought it in 2021 and I want to give a review after a year of using. I have read people issue and one thing I feel like they misunderstand the product is the arms keep falling down because of weight of monitor. I use two 27” MSI curve monitors and have no issue with it. I tighten the joint that closest to monitor using allen key provided (there are screw adjustment of tightness) and also every pivot point has screw adjustment and you can use allen key provided to tight it. I have not tried 32” monitor but I think this mount can handle the weight, maybe just one monitor as both 2 arms may not stretch out for the width of two 32” monitors. So, I recommend this product for two 27” monitors or smaller, if you need two monitors on this mount.

Ottima qualita' costruttiva, facile da montare, solido. Lo uso con 2 monitor Dell da 27" e le braccia reggono facilmente il peso. Vi sono molti prodotti simili tra cui scegliere non so se questo e' il migliore ma sono molto soddisfatto.

Brazo para soportar monitor excelente. Al principio la instalación es difícil si nunca has hecho una, pero después de leer un poco el manual y darle unos minutos puedes ser capaz de instalarlo completamente solo, me tomó al rededor de 2-3h porque nunca habia instalado algo similar. Pero una vez instalado, el soporte está increíble, la maniobrabilidad es más de la que pensé y libera MUCHISIMO espacio del escritorio, de verdad, muchísimo