PUEEN 35mm HD Chunky Transparent Soft Stamper and Scraper Set - Nail Art - Stamping Tools - CLEAR - BH000706

I already purchased this stamper from Walmart when I first started out. I purchased it again on here to have a spare. This package also comes with a small scraper. I’ve been doing stamping for nearly 2 years now. This was my very first stamper. It is actually the best kind of stamper to start out with, because it’s the softer, squishy, marshmallow type that will pick up images on plates that have really shallow engraving or are etched too deeply. It will pick up images when many other stampers won’t. This will always be my go to stamper when I’m having a lot of trouble getting other stampers that I use to stamp an image that I really want to use. I use tape or a lint roller to clean any excess stamping polish off the stamper head after picking up each image. Do this between every pick up. I was able to use this stamper straight out of the package, without doing anything to it. But, over time, I have found a couple times where it seemed to not pick up as well after a lot of use. So, I just washed it, and it went back to picking up great. For anyone having trouble stamping with this stamper, try the 2 following things to help prime it. One: carefully hand wash stamper with dish liquid, rinse, and gently pat dry with a paper towel. Then, gently reinsert it back into plastic holder. Two: remove the silicone stamper head from the plastic holder, and lay it (BOTTOM SIDE DOWN) on a regular piece of paper. If you’re in a hurry, you can leave it sitting like this for a short period of 30 minutes to an hour. Or, for better results, leave it sitting several hours to over night. The paper will soak up the excess oils that build up in the silicone. Both of these things should help in priming the stamper. Clear silicone stampers are NEVER meant to be primed like the older type non-see through stampers do. Do not prime the top of clear stampers with anything like a file or similar in order to dull them up in order to remove the shine. It defeats the purpose of having a clear stamper to see through. Clear silicone stampers are not made the same way as older stamper heads that are not see through. Clear stampers are much more delicate as well. Do not let acetone come into contact with the stamper head or plastic holder. The silicone head will eventually break down from acetone contact. It won’t hurt it immediately. But, in the long run, it is not meant to come into contact with acetone. The plastic holder will nearly immediately become permanently cloudy/damaged from contact with acetone. You can still use it. But, any area of plastic, that comes into contact with acetone, will no longer be clear. If you’re having problems learning how to stamp, I suggest getting on YouTube, and search for nail stamping tutorials. There are TONS of videos on there that will help teach you. This is how I learned to stamp. It takes time. Happy stamping!

I’ve been using it frequently for over a year now. It broke after I dropped it one too many times so I glued it back together and it’s still going strong. It’s the stamper I reach for over all my other ones. Able to pick up low quality engravings on cheap plates that other stampers can’t grab Perfect for short or long nails. Really good size

I am a beginner stamper and this is my first one. I’ve been watching nail tutorials for years now without practice but now have money to buy the products I want. I havent tried any other stampers yet but I feel there are really only 2 drawbacks to this one. It doesn’t have a lot to grasp onto so I think it makes it more difficult to pick up the polish off the stamping plate and when you remove the bottom cap to see through it to place the design on your nail, if you press too hard it will pop right up, however this isn’t too much an issue except when cleaning it with the tape. Otherwise I think this is great to get started and the feel of stamping and it’s cost effective. The scraper is functional but would probably be better if it were bigger.

Came apart quickly - within a week. The back fell off. The silicone part will not stay in the stamper. The stamper itself is foggy so I can’t see through it to actually place my stamp. Do not recommend.

Edit: this stamper works great. After a year of doing my nails I tried this stamper again and it works perfectly. It doesn't need to be buffed or anything like that. Just get stamping polish & use a really gentle touch when picking up the stamp. I am pretty new to stamping. I have a non-clear stamper that works perfectly. The only downside of that one is you can't see exactly where you're placing your stamp. So I got two of these thinking they'd solve my problem. I opened the first and it did not pick up the paint at all (paint that works with my old stamper perfectly). I tried filing it a bit and such like others recommended. That worked! But only for a few stamps. I don't have the patience to file it and all every time I want to stamp a nail. So I'll just stick to my stamper that isn't clear. Would not recommend this stamper to anyone. Edit: I tried the second one and that does kind-of work, but not as well as my original non-clear stamper. I have to clean the plate between each use and it doesn't work with all of my stamps.

Picked up images well, but you absolutely must wash with dish soap first. Super clear, but the stamper head was fairly loose and would pop out of the handle every time I went to pull the stamper off the plate. And I work super fast since I'm used to working with regular polish for stamping, so it's not like it was on the plate for long or pushed down super hard. It did transfer perfectly though. Nice crisp image, and simple placement since this thing is super clear. I did remove the extra magnification piece since it's just a touch cloudier with it inserted. My biggest issue was using this for French tips. My nails aren't sharp, but it did tear on the second full French tip. Worked beautifully for some color at the tip of the nail, but split again the third time trying a longer French tip. I'm super picky about stampers (Back in the day I was a nail polish blogger, and stamping was my thing.), and have many Pueen products that I adore. I really wanted to love this I'd keep it for a backup stamper if it hadn't torn. This really is the only Pueen product that I haven't loved, and I prefer their jeweled stamper (pink stamper head) to most other stampers. And for now I'll stick to lining my French tips.

I am really impressed with this clear jelly stamper and scraper. It has a plastic cover that can snap on to protect the jelly portion of the stamper, and the scraper is a flexible clear plastic. When I got the stamper out of the box, I primed it by taking some mailing tape and pressing it on the jelly surface to remove any oils or dust. Don't use polish remover or alcohol on the jelly surface or else you will fog up and degrade your stamper. After that, I used my Born Pretty holiday stamping plates and Born Pretty stamping polish and everything picked up clearly and easily on the stamper. The key to getting it to pick up is a very light, very gentle roll. Do not press down hard, and do not wait too long to pick things up. Then take the design and stamp directly onto the nail, with a light rolling back and forth motion to get the sides to stick down. After that, use some tape to clean up around the nail and to remove any design left on your stamper. If you are still struggling to get designs to pick up, watch some YouTube videos to improve your stamping technique. I never had any issues with the jelly part of the stamper falling out or being difficult to work with. I would highly recommend this stamper for beginners!

I've used this brand for years, my first rubber stamp is still going strong. But I bought this one because it is bigger, which helps preserve the stamps better and makes for much easier application. The true winner for me is the scraper. It doesn't look like much, just a tiny piece of plastic but it works so much better than anything else I've tried! It scrapes off the excess polish without taking too much. I've tried to use this exact unicorn design several times in the past and it never turned out correctly. But with this larger stamp and scraper, it was flawless!

Muy buen producto recoje muy bien el patrón del diseño muy contenta de a ver comprado este sello ampliamente recomendado 👍😀

it doesnot work ell, french tips are extremly uneven and kept falling part; ill rater draw my own. ill be getting a refund.

Great and very clear did the star pattern on my nails with this stampwr works great

Nice and clear and picks up perfectly without priming! I have been on the hunt for a clear stamper for the past few years. I have tried bundle monster, then a new one from maniology, what’s up nails and a cheap AliExpress one. None of them ever picked up, even with priming (dish soap, acetone swipe, nothing worked) I have been stamping for over 10 years but the clear ones never worked for me. I gave this one a try and I’m happy with it. As you can see it distorts straight lines but I may just need more practice. I can use this for other images I need perfect placement for.

This is a great little tool. To those reviewing it won't pick up polish you just need to practice. I bought this and it was my first time. I had the exact same problem but continued to practice and figured it out. Pay very close attention to the instructions. Picks up images great once you learn the technique, easy to see so you can make sure of that and place it precisely. Highly recommend over a longer stamper especially if you are new to this. That being said - yes the silicone does seem to pop out but this shouldn't affect you. You're not supposed to be pressing hard and it will stay in place. If you're pushing so hard it is pushing in then you're doing too much friends!