AUXITO 3157 LED Bulb White, Super Bright 4157 3156 LED Reverse Light Bulbs 3056 3057 3047 4057 3457 4114 LED Bulb for Exterior Backup Tail Brake DRL Signal Parking Lights, Pack of 2

I got these bulbs for my 2012 Toyota Yaris license plate and they are a massive upgrade. Installation was super fast, just plug and play in under 5 minutes with a perfect fit. The light is a very clean, crisp white and way brighter than the stock halogens. They don't flicker at all and make the car look much more modern. Without a doubt, I will be buying them again.

Incandescent reverse and brake lights have been the automotive equivalent of using a candle when a flashlight exists for decades now and LED replacements like the AUXITO 3157 are the easy fix that should have happened at the factory. Dropped these in and the difference versus the stock bulbs is not subtle — it's the kind of improvement that makes you wonder how you drove with the originals for as long as you did. Direct 3157 socket fit means this is a plug and play swap with no wiring, no resistors, no adapter harness. Pull the old bulb, push the new one in, done. The cross compatibility list covering 4157, 3156, 3056, 3057, 3047, 4057, 3457, and 4114 applications means these cover a wide range of exterior lighting positions across multiple vehicle makes without hunting down position-specific bulbs. Brightness on the reverse lights is the most immediately noticeable improvement — backing up at night went from "hoping nothing is behind me" to actually illuminating what's back there with enough light to matter. Brake light visibility improvement is the safety upgrade that pays dividends in traffic without anyone behind you having to question whether your brakes are actually applied. Heat output is dramatically lower than the incandescent originals which matters for socket and lens longevity on older vehicles where the housings have already seen years of heat cycles. Running cool means the lens stays cleaner longer and the socket doesn't continue degrading. Pack of two covers one application completely — both sides matched in brightness and color temperature for a clean consistent look. White output is crisp without the blue tint that makes some LED bulbs look aftermarket rather than intentional. Simple upgrade, immediate results, highly recommended.

I am a Professional Mobile Mechanic and I was looking specifically for some High Quality LED lights for my 2015 Chevrolet Equinox LS that still have the factory style bulbs which are very dull looking.. These lights from Auxito are far superior than anything I’ve seen at the local Big Named auto parts stores. If you’re hesitant because of the price, I promise you that these are worth the extra couple dollars for a Premium product. I highly recommend these! Super bright! They don’t get hot. And Auxito will be a Brabd I use from here on out for myself and my customers! When I was trying to install the Brake Lights, it triggered the “Hyper-Flash” with both sides! I can only attach one video here so I wanted to show how to fix the Hyper-Flash with a “Sylvania: Load Equalizer”. I grabbed one from the local Autozone for $20 which comes with 2 in the box for both sides. The Part Number is: “Load Equalizer”. Now that you are reading this review, you can also add one of these to your cart now to save yourself the frustration later (can always return if not needed) 🙂. To connect the Load Equalizer: There is a video on YouTube directly from Sylvania, showing how to do it, Just type in “Sylvania Load Equalizer”. It connects the Blinker wire with the Ground wire which fixes the Hyper Flash and No splicing of the wires is required!! It includes a little red piece that connects both wires without the need to cut them yourself, very easy to install! Use the “Zip-Tie” around the red piece afterwards to keep it closed tightly. This little thing get super hot one properly installed, don’t put it near any wires as it could melt them. Tuck it away in the tail light away from the wires. Anyone with a Chevy will most likely need this too! I am not sure about other makes and models how it reacts yet.

These LED bulbs are a total game-changer. They are incredibly inexpensive but perform like a premium product. Installation took less than 5 minutes—literally just plug-and-play. They are way brighter than the factory stock bulbs and make backing up at night so much safer. Highly recommend!

Light bulbs did cause some hyper flash issues but they are nice and bright and they seem to be lasting a decent amount of time so far compared to the other ones I bought that only lasted a year. These are lasting a lot longer. They are a little bit more money, but I think they’re worth it. Installation was easy no problems there nice crisp amber light.

These bulbs exceeded my expectations. Installation was very easy because they are direct-connect and non-polarized, so they worked instantly. The difference in brightness compared to the original bulbs is enormous; they provide much better illumination when shifting into reverse, especially at night. The 6000K white light looks modern and crisp, helping to improve visibility when parking. Furthermore, they do not flicker or trigger any error messages in the vehicle. The build quality feels excellent, and the compact design fit perfectly. An excellent choice if you want to upgrade your car's reverse lights.

Worked amaizing and really bright! Got them for my Camry, didn’t realize the side marker bulbs were dead and these ones fit right in and lit up perfectly! The color was perfect, easy to install!

They flicker for a few seconds when first starting the car but then function as normal. Nice and bright just beware of flickering

لم تركب على قاعدة لمبة سيارتي GMC بمقاس HT7441

These bulbs were easy to install and are insanely bright.

Me gustó mucho la vdd le quedó muy bien a mi kia rio como luz diurna.

Good brightness but one bulb after 2 month not working any more

Best ever LED Reverse Light for TATA Nexon XZA+ Lux. Thank you 👍