Arduino Nano Every (Single Board) [ABX00028-A] - ATmega4809 Microcontroller, 48KB Flash, 6KB SRAM, 20 Digital I/O Pins, 8 Analog Inputs, USB-C, Compatible with Arduino IDE for Embedded Projects

The Arduino Nano Every has proven to be quite useful for a drone sensor project. Despite maintaining the iconic Nano form factor, which I needed for space-saving reasons, the shift to an ATMega4809 processor allowed for much greater memory storage, giving me access to 48KB of Flash memory. I found this to be immensely helpful since the additional memory allowed me to store more elaborate libraries and sensor fusion code, which would previously cause memory problems on my previous boards. On a functional level, I was delighted by how responsive the board is when receiving data from sensors. Since it is a crucial task during flight, having zero latency while polling the information from my IMU and barometer sensors was critical for maintaining a stable drone operation. In terms of its physical design, the board feels like it was made of premium quality components, with neat soldering points and a durable micro-USB connector. Finally, integrating the device into my drone was effortless. Within seconds of turning the board on, I had the communication between the onboard sensors established using the I2C protocol. Additionally, the Arduino Nano Every proved to be incredibly compatible with all the libraries I tried. Despite being so small, it offers enough power to perform all the required calculations in real time, which made it incredibly efficient to use.

Just as advertised.

Recommend for sure - you defiantly can NOT have enough Arduino boards - this pack is well priced and good value for the money. Will but more when needed. Works without issues under Arduino IDE with the proper boards installation.

Many of the clones require extra drivers and other things to work. I plugged these in and the IDE recognized them. Less hassle then using clones. Only issue I have with these boards is the pin names are on the bottom. You could put the pin names on the top, but then the reset button is on the bottom.

These are very cool for what ever you do. I made a magnet strength meter.

Muy bueno pero cuidado con las Corrientes si controlas reele y es un nano every sino sabes eso estás frito para el arduino idle

Arduino Nano Every - sold in either 3 or 6 packs, not as singles according to Arduino however, I have seen them on eBay separately. This must be someone reselling. This is NOT a Nano. It is an evolution of the traditional Arduino Nano, their words, not mine. It is the same size as the Nano with the same number of input/outputs. The website says it only has 5 pwm pins since D11 is used for something else but, according to the pinout sheet I still count 6. It uses an ATMega4809 processor instead of the standard ATMega328P with 50% more program memory (48k vs 32k) and 200% more RAM (6k vs 2k). Yeah I know, I got it off the website. Just cause they can develop neat devices doesn’t make them good at math. The ATMega4809 runs at 20mhz while the ATMega328P runs at 16mhz The IDE went to the Arduino website and downloaded the correct board and USB port when I plugged the first one in. The boards evidently have the “Blink” exercise routine already in memory. Uploaded a sketch without issue. (I use a Mac, you PC weenies are on your own) There is a warning from the IDE after compiling the code “avrdude: jtagmkII_initialize(): Cannot locate "flash" and "boot" memories in description”, but it doesn’t affect the compile or upload. Header pins are not attached to the board. It tells this on the website but not in any of the sellers ads. Uses a Micro-B USB cable instead of the Mini-B used on the standard Nano. It is not included. The boards aren’t even in anti static bags, just loose in the boxes. Has the Official NFL or NASCAR silver sticker on the boxes for all the Arduino snobs.

I received a used nano every in a crushed box that was open without headers. I will no longer be ordering anything from Arduino again.

Desde que probé este arduino ya no quiero el nano antiguo. este es una mejora total además no tienes espacio ocupado por el bootloader + un monton de RAM para llenarla de texto y proceso de datos. Al principio cuesta porque la arquitectura de los micros es totalmente diferente, tienes que habituarte al nuevo datasheet. Lo genial del Every además del procesador, y lo del bootloader, tienes un dc-dc que te permite trabajar a 20Vin sin recalentar la placa. pero ojo, tienes que ponerle diodo a Vin porque sino al usar el usb alimentaras todo lo que esté por detras...Tienes los castellated holes para soldar la placa directamente sin pinheaders. Ojo con los 20Mhz, la placa viene a 16Mhz, si la cambias a 20Mhz funciones de arduino de PWM y timers se van a desconfigurar. Ojalá Arduino sacase una placa como esta corriendo a 32Mhz o más, sin wifi ni esas cosas que no hacen falta en sistemas stand alone.

Very robust, good value board. Easily programmed with the Arduino IDE. The nano every can be handy because of its 5V logic which makes some sensors plug and play that would otherwise need level shifters.

アルデーノとして問題なく使えました。

Schnelle Lieferung, anständig verpackt, und funktioniert einwandfrei mit Arduino-IDE.

Conforme à la description. Pa encore testé mais vu que c'est de l'officiel Arduino, ça devrait aller