10mm 4pin 5050 RGB LED Strip Solderless Connector Kit- Includes 6.6FT Extension Cable,2 Way Splitter,L and T Shape connectors

Fantastic set of connectors for LED light strips. I read some of the negative reviews on here about the connectors being a bit unreliable but I've use them on two different 5 meter LED strips which I've had to split up to do what I want with them. My cupboard and shelf unit (photographed) needed a 5 meter strip split into five lengths then connected using the splitter cable, corner connectors and short connecting cables. They all worked perfectly. The kit comes with screws and clips to affix the connectors and cables but I didn't have to use any of them. The connectors can be a little bit fiddly so if you have any issues just make sure you are getting good contact across all 4 pins. Overall I'm very happy with this kit, it did exactly what I needed it to without issues.

I ordered the FSJEE 10mm 4-pin solderless connector kit to upgrade and tidy up my home RGB LED strip lighting, and it’s proven to be a fantastic little kit. Whether you're a beginner in DIY lighting or someone who regularly works with LED setups, this kit makes life so much easier. Straight away, the first big win is that it's truly solderless — no faffing about with wires, soldering irons or heat shrink tubing. Everything connects with simple clip-on mechanisms, which makes customising or extending your setup a breeze. The clips feel firm and well-made, not flimsy or prone to breaking like some cheaper kits I’ve tried before. The kit includes everything you'd expect and then some — an L-shape and T-shape connector for turning corners and creating branches, a 2-way splitter, a generous 6.6ft extension cable, and plenty of joiners for standard in-line connections. It’s a proper toolkit rather than just a bag of random connectors. Installation was smooth. I used it to split a 5m RGB LED strip around a room and run a section under some kitchen cabinets, and everything worked first time. The extension cable was long enough to reach under the counter without needing any DIY splicing. The connectors clip onto 5050 strips easily — just make sure to line up the polarity correctly (the arrows or "12V" labels help). The quality of the materials is decent — the wires are thick enough to handle power without voltage drop, and the plastic housings hold everything securely. I’ve had no issues with flickering, signal loss or dimming — and that includes running through corners and tight bends. One minor tip: the strip needs to have exposed copper contacts, so if your LED strips are waterproof or coated, you’ll need to peel or trim back the silicone. That’s standard with any solderless connector, though — not a flaw of the product. The packaging was well-organised, with each part in its own pouch, and there’s even a simple instruction sheet included to guide you through basic setups. Overall, this kit is fantastic value and covers most configurations you’ll run into with RGB strip lighting. Whether you're repairing, extending or just tidying up an installation, I wouldn’t hesitate to recommend it. It saved me loads of time and hassle!

These have worked well with my LEDs that I’ve stuck to the back of my TV and cabinet. Sometimes the pins inside them are squashed down so you can’t fit the LED strip in, but I found a nail or toothpick works to pry them up and then squash them back down again. Another annoyance is that the pins need to be lined up correctly (ie +RGB to +RGB, not +RGB to BGR+), so I found some corners don’t work… you need to plan ahead! So far I’ve only found one L connector to not work, all others seem to be doing their job well.

This solderless connector kit works very well and makes installing RGB LED strips much easier. The connectors fit securely onto 10 mm 5050 strips and provide reliable connections without the need for soldering. The included extension cable is a good length and adds flexibility when routing strips around corners or obstacles. Everything feels well made and connections stay firm with no flickering issues. Overall, a very practical and reliable kit that offers excellent value.

Okay for the price, however they are flimsy, easy to break and what I found more annoying is that I had to alter the wiring for the female connectors. Basically due to angles I was using, I had to use multiple connectors, however I could not simple plug each connector onto the stripe as the + and - were not following that of the first connector. In addition, the pins are intermittent causing parts of the led stripe to turn off.

Great little pack, allowed me to work around corners over gaps etc.

I have been trying to get these to play nice with a set of govee LED strips, and I've come to the conclusion after EXTENSIVE troubleshooting, the connectors are absolute TRASH. I hate to leave a bad review but my god these are bad, and I know you're reading this going "yeah OK, then what do YOU recommend?" I have nothing at the moment, sadly, I am about to go shopping for more, but pay attention to the reviews, I would not bother to leave this if they were not so bloody USELESS. In the bin, what a waste, connectors are so lose and I have to hold each connector with my bloody fingers, tape won't even hold them tight. Amazon pull this crap, it's beyond useless.

OK do the job