Wonderlokking Tite Chairs, Adhesive for Chair Joint and Furniture Repair by PC-Products, 5 gram 208120

We have 4 old chairs that are old, have been abused and need some love... we still really like them though. They have character and really suit the room. But hey were so loose and falling apart that we thought we would have to take them apart and really work them over with brackets etc... I don't have time for that because this is a FULL time caregiving situation now. So I looked around for new chairs and couldn't find anything similar for under $350 each. Plus these are (mostly) solid oak, so very strong wood (they are painted white). After reading all of the reviews I decided to give this a chance - SO GLAD I DID. I am shocked how well it worked! My dad doesn't believe it could be so simple to fix the chairs.After I got everyone situated for the night, I started with my first chair. I didn't clean it well first, I should have, because some runaway glue streaked on it sealing in the dirt. It's ok, they are destined to be repainted (someday) now that they are repairable. It is tricky taking off the outer cap the first time, because the directions are not clear. You don't know what you will discover, and are warned to point it away. It's ok. It's just an outer cap. Then you twist off the actual cap (which has a metal piece that fits back down into the opening to keep it from sealing off when not in use). The package contains two fine tipped nozzles to add to the top of the bottle. The very fine point is one of the reasons this stuff works so well because you can get it right into many cracks. THERE ARE TWO, but at first I thought I only got one. Mine did not come on the blister pack and instead came in a zip-lock Mylar package. The sides compress and that hid one of my nozzles. The nozzles are very tiny - so treat them like gold. You do not want to lose them!!! And I wish the package came with at least three. The glue does seem to recede back into the bottle when you stand it upright, so the nozzles are reusable for awhile. I am not sure how many times yet, I have only done three sessions so far.The glue is VERY thin so use GOOD lighting or you will not really see what it is doing and over apply it. Also, since it is very thin, it is gravity fed. Which means if you want less coming out keep it at a steeper angle and squeeze. If you want a lot, then turn the bottle more upsidedown - but be careful, no need to squeeze!!! It's very easy, just need patience and don't rush.The chair backs are layers pressed together and due to so much going on here, some got left out in the rain. The layers started to separate on one, so I squeezed the stuff in and clamped it. Voila! It is now stabilized. I am sitting on a chair now, that was about to collapse yesterday. It was so wobbly that the seat had started to crack in several places. (I didn't realize that until I took the chair pads off) Only one went all of the way through in a small area to the bottom (I started working on the chairs upsidedown). Since the glue is VERY thin and the crack was wide without being clamped - I clamped it FIRST, then ran the glue through it as a starter pass. I left it clamped overnight. Tonight, I will work from the top and hit all of the other seat cracks along with anything else that goes down. MAKE SURE YOU WORK WITH GRAVITY and apply the glue where it will always be optimal going downwards. You can get by with a little bit of sideways action depending on the connection, but never attempt anything going upwards. It's a lot like nail glue - but not, somehow. Those vary and I have used some amazing ones, yet other ones just don't perform well. I can never tell why. I am tempted to use this on a nail next time ; )THIS STUFF IS A MIRACLE - and I don't even care if I have to reuse it again, since it has done such an amazing job!!! These chairs were headed to the trash, or worse, about to cause an accident with an elderly person in it. Now - they are solid!!! Now, they can look forward to a new life with fresh paint (someday). AND, I saved over $1500 in new chairs (that wouldn't even be solid wood or have the nice design these have). I will be trying it out on other stuff as the need arises...

I have 6 Windsor back style wood chairs and all had multiple loose spindles that had completely come out of their respective holes and loose rungs. They were wobbly and in bad shape. I had been debating between buying new chairs or sending them out for repair. Either option was going to cost several hundred dollars.Then I happen to find this chair glue on Amazon when I was searching for something else, so figured it was worth trying it.Well, I took a rubber mallet and pounded each spindle back in place then used the chair glue with the thin nozzle attached and applied at the insertion crevice around each spindle (top and bottom) and each rung on each chair. The instructions were adequate too. After the glue dried the chairs felt so solid again. Its been almost 2 months since I made the repairs and the chairs still feel solid. I also repaired 3 wood bar stools that also had the rungs underneath that were loose. Those are doing just fine too.And even though its a small bottle, it goes a long way. I still have glue left and looking for more things to repair and use it on.I do recommend using latex gloves. If you get it on your skin its like superglue and dries quickly making it hard to remove. I learned the hard way. I had to use acetone to remove off my fingers after the first chair. The product is runny so have to use care when applying to the joints, but wipes off easily with a dry cloth from the chair.I am so happy I came across this product. It works great and saved me lots of money.

This product is like a super, super glue. Works great!

This stuff performs miracles. It fixed a crack in my wife's expensive guitar which is now playable again!!! It fixed up an ancient chair that has been in my family for about a century. Nobody would dare sit in it, now it is usable again. It is doing a great job on our best dining room chairs which have been with us for almost half a century.I have knocked off one star because of the very feeble instructions. Lessons learned the hard way:(1) Keep both hands free. Do not try to work with one hand while the other holds the chair. Hold a paper towel in the other hand.(2) Use it like an eye-dropper, one drop at a time, directly on the crack. Capillary attraction will pull most of the drop in. As soon as that stops, wipe up the rest before it becomes a sticky mess; you do have a few seconds.(3) If you try to use this like a miniature caulk gun and lay a bead along the crack, you get a big sticky mess.(4) An attempt to use it as a squirt gun to avoid turning the chair over just creates a giant sticky mess.(5) Do not try to hold the bottle in one hand while turning the chair over with the other hand. In the midst of that wrestling match you are bound to squeeze the bottle, which creates a humongous sticky mess.Patience is the essential virtue when handling this potent miracle!!!!

We bought an old rocking chair from an antique shop so it would be easier to put my 40 pound 13 month old to sleep (We were previously using a second hand glider which after repeated use, just started snapping like match sticks). The rocking chair is great, but there was a horizontal bar at the front that kept popping out, and I didn't want parts of my chair to be popping out; so every day I would smash the chair together before I went to work, and again after I came home from work, after my fiancée used the chair to put our son down during the day, I would smash the chair together again before I put him down for the night. This was a daily routine that I didn't want to have to continue.I read the product instructions on Amazon, read some nightmare reviews, and decided to re-read the product instructions. When the product arrived, re-read the instructions, I prepared the work area as instructed and followed the instructions. The product performed exactly as described, one application and I have not had to smash my rocking chair since. 5 stars.Read and follow the instructions.

Wow, this really works well. I have a chair with wobbly joints which I’m reupholstering. During the process of removing a million staples from the frame, the chair joints began to loosen until the whole thing was quite rocky. I applied this amazing glue, using the very fine applicator nozzle, and it now feels solid again. I can’t understand how it works so well? What magic is this?? Well worth the cost. I hope it will be useable the next time I need it unlike most other superglues.

in trying to get the outer lid off the inner lid came away at the same tip spraying glue everywhere including on the upholstery I was trying to fix so ruining it and wasting half the contents. Lots of work and effort and time and expense it is now more broken than before I started. This glue needs reapplying several times to make any difference.

This very liquid glue seems to magically seep into joints and cracks via osmosis. Fixed four old oak chairs that needed re-gluing at every joint with each chair remaining fully assembled through out the process and so far, all are holding together really well. No more wobbles.Highly recommended.

This worked great to fix the loose joints on our dining room chairs. We thought we would have to take the chairs apart and re glue them which was a big job but this product went right into the joints and the chairs are now very solid. Great product.