Fujipoly/mod/smart Extreme X-e Thermal Pad - 60 x 50 x 1.5 - Thermal Conductivity 11.0 W/mK

I used these to replace the stock pads on an EVGA 2080 ti FTW3 Hybrid GPU. I was a bit concerned about my memory temps on the MEM3 thermistor, sometimes topping out at a toasty 81 degrees. After I placed these they no longer go above 75 degrees Celsius. I did make a change in the radiator placement from hot air from the case in the back exhaust to cooler air from the room on the front intake which I believe had more to do with the temperature drop. Either way they're just as good as stock at least, at most they're dropping 5-6 degrees celcius, so the true answer is probably somewhere in between 2-3 degree drop. They were easy to cut to size with a razor blade, however make sure you get them in the right spot your first try as they are delicate and could possibly tear or separate if you try to get it back off. With this size I was able to do the 3 memory banks (11 ram modules) and some of the more shot pads on the power phases and VRM. But really this size will only be enough for your memory on a larger GPU like the 2080 ti.

Definitely expensive so I carefully cut the pieces out chip by chip but was able to make 3 packs cover two 3090 fe front and back for all the hottest components and then used cheaper pads for all the extras that ek had on their diagram. Works almost twice as good as my thermal grizzly pads did so I am able to render large projects with zero throttling and higher overclocks at under 80 C rather than getting to 100 C occasionally. Some of this is of course the water block being a better fit than an AIO attached to the backplate. Recommend for heavy production use where time and temps cost you.

works well but price is a bit high for how much your getting. Fujipoly needs to start making this stuff cheaper.

If you're repasting your laptop or GPU and you want to throw in some better pads but don't feel like springing for the top of the line Fujipoly pads, this is definitely the one to get. Easier to work with compared to the 17 W/mK and the benefits when compared to every OEM thermal pad I've tested from Dell/Alienware to MSI or ASUS, the results speak for themselves. Lower temps when the CPU is under load due to more efficiently cooled VRMs, and overclocking voltage is far more stable.

bought a 3 pack of these and used them on my 3090. My temps are fixed and its because of this in combination with copper heatsinks

Bought it for a PS3 refurbish, works great and had just enough to complete.

Used this to replace thermal pads on a ps 3 ,along withArtic mx4. 100% improvement. Plan on using the rest of it for my PS4 and Xbox one s.

This was the appropriate thickness for my MSI GTX 1060 6GB Armor OC memory.