- TV Wall Mount for Most 32-70 Inch TV

Overall this TV mount works great. It was fairly easy to set up, is easy to adjust, and seems sturdy. The most important feature is that this mount allows you to center your TV almost exactly where you want it, even while the TV is pushed all the way back against the wall. With another mount I tried, and many others from what I can tell, when the TV is pressed back against the wall, you are at the mercy of where your wall studs are located. I am surprised the description on this does not clearly indicate this can be done. With many other mounts, sure, you can adjust the position of the TV back and forth, but the TV has to be pulled out from the wall in order to do so. Because this mount has extender brackets, you can mount the center of the unit pretty much anywhere between two studs, although I think this would only be the case with 16 inch studs. In my case, I added the extender brackets to only one end of the mount, which allowed me to center the TV almost exactly where I wanted it. You are limited a little bit by where the holes are, but you should be able to get it exactly centered, or at least within less than an inch of center if the holes aren't exactly where you need them. Also, when you attach the TV to the mount, you can mount it slightly off center, so you could fine tune in that manner (maybe an inch or so either way, depending where your TV inputs are. Other than that, it's a TV mount and does what you'd expect it to do. The amount of swivel depends, I think, on the size of your TV. If it's larger, it's not going to swivel quite as much until you are limited by hitting the wall. I have a 40" TV mounted and I am able to swivel more than the advertised 45 degrees. If your TV was smaller, you could probably swivel almost perpendicular with the wall. Swiveling and side to side movement can be done on the fly, but up/down tilt and leveling has to be adjusted with a tool.

Great packaging. All screws are in separate packets with letters that match the instructions! Why doesn't everyone do that. Tons of multiple screw sizes and many different spacers to mount bracket to tv. Seems like it would fit any tv. I used the extra long screws with spacers to get it all the way down to the bottom of the screw socket on the TV. Very secure. Mount is incredibly sturdy. Comes with 4 lag screws to mount into wall stud. I put up 2 1x6 boards across 3 studs and screwed mount into boards with 6 lag screws each and the provided lag screw through the bracket in the center into the stud. It ain't ever coming down. Hung the Tv on bracket and screwed in mounting screws to secure. I nudged it a little to center it before securing screws. Very nice and secure tilt; screwed in place with provided Allen wrench. Rotates right and left and comes out without much effort and stays securely in place. Extremely happy with purchase. Will buy this again.

This wall mounting assembly was delivered on the day promised. It came well packaged, all pieces were in good condition. The unit is well made from heavy duty steel, easily supports a 55" M series Visio smart tv. The tv locks onto the wall bracket and is very secure, it's not going to fall, it's not going anywhere. This unit comes with all the screws, bolts, nuts, washers and spacers needed to mount the tv. The kit also comes with extension pieces that would be needed if wall studs are more than 16 inches on center (I did not need to use them). The kit comes with a template to use to mark where the holes need to be drilled into the wall studs. This template was very helpful. Make sure to use a good stud finder and a level before marking or drilling holes. Once attached, the tv moves in and out and side to side smoothly (a modest pul or push is required) but not too much. The tv sits nice and level on the wall, and stays in the position I put it in - no drooping or swaying. All in all I'm very happy with this product and strongly recommend it.

The Mounting Dream MD2268-LK TV Wall Mount Bracket is a dependable choice for those seeking a straightforward and cost-effective way to mount their television. Designed to accommodate TVs ranging from 37 to 82 inches and supporting up to 132 lbs, it offers versatility for various setups. Installation: Installation is user-friendly, with clear instructions and all necessary hardware included. The mount is compatible with 16", 18", and 24" wood studs, providing flexibility in placement. Its low-profile design positions the TV just 1.5 inches from the wall, offering a sleek appearance Build Quality: Constructed from heavy-duty steel, the mount feels sturdy and secure. Its UL certification adds an extra layer of confidence in its safety and durability. Pros: Supports a wide range of TV sizes (37–82 inches) Low-profile design for a sleek look Tilting feature reduces glare Easy installation with comprehensive instructions Cons: Limited to tilting; lacks swivel or full-motion capabilities Rating: ★★★★☆ (4.5/5) Overall, the Mounting Dream MD2268-LK is an excellent choice for those seeking a reliable and affordable tilting TV wall mount. Its robust build and ease of installation make it a standout in its category.

Very sturdy and versatile. Can move out from the wall tilt up and down and turn left and right. One minor complaint is that the tv can not be closer than 3 inches from the wall

This is by far the most complete kit I have ever used to wall mount a new lage 65" samsung on the wall. The mount will let the tv pull out from the wall, slip side to side angle a large amount left to right, Allow you to adjust the tv's tilt angle. There is no assembly of the wall mount and it comes with all hardware you need to mount to drywall with studs, brick, stone, even concrete. Find your wall studs and mark them. Determine the height on the wall you want the tv. All fasteners to mount to wall are included. using the supplied kit of screws and spacers mount two bracket to back of tv, very simple. Hang tv on bracket and tighten two already installed locking screws. You will need a phillips screwdriver, socket wrench, tape measure. There are only three steps from start to finish. Holds up to 100 pounds and works .perfectly. It honestly took me less than 45 minutes from start to finish. It operates super smoothly. A great product for the price.

The wall mount is easy to install and of good quality.

The "Mounting Dream TV Mount" was indeed a dream to install. The provided mounting template made placement relative to the studs very easy, they even include a small (but accurate) level to make the process even easier since you can easily handle the level and template at the same time. The mount has added bracket inserts to insure you can secure to studs on both sides of the mount, simply and securely. The range of motion is great with ample horizontal and vertical flexibility for any viewing position. Once the bracket is attached to the wall, the TV bracket easily attaches to the wall mount with large set screws to insure the two parts will not separate once mounted. The mount comes with all necessary screws and directions of the drill bit size to use for pilot holes. As pictured, I used this to mount my 65" TV - it feels secure in any viewing position desired. Highly recommend this product not only for the installation ease and heavy-duty construction, but the price for the quality is unmatched by any other mount I viewed

Mounting Dream TV Wall Mount TV Bracket for Most 42-90 Inch TV, UL Listed Full Motion TV Mount with Articulating Arms, MAX VESA 800x400mm 132 lbs. Loading, Fits 16", 18", 24" Studs MD2298-XL Excelente soporte para TV, lo compré para montar una TV Samsung QLED 85" y si le queda. La guía / mapa de perforaciones es la que hace toda la chamba de precisión y perforación, no necesitas estar midiendo, trazando y cargar el soporte para presentar en el muro, la única medida que requieres es la que inicia del piso hacia arriba, con esta guía me ahorré $1,000 MXN qué me cobraban por la instalación. Trae tornillos y espaciadores de todas las medidas, no hay pierde en que le falten piezas, además trae 4 tornillos para fijar en la pared, pero como soy algo paranoico con este tipo de aparatos, le atornillé 8 tornillos más, para un total de 12 tornillos con sus respectivas rondanas y taquetes (Que no se incluyen con el producto) La única ocasión donde se requiere dos personas es para subir la pantalla al soporte y realizar el atornillado final (2 tornillos qué fija la pantalla con el soporte previamente atornillado al muro). Lo único malo es que las instrucciones están en 90% inglés y el restante en español qué corresponde a la presentación del producto (O sea, nada), pero hay videos en YouTube de como realizan la instalación de este soporte.

I only got 1 of the 2 brackets delivered.

Excelente opción. Tengo una tele de esas delgadas que son como cuadro y con esta base puedo inclinarla pegarla moverla, de todo. De lo mejor que he comprado.

Muy buen soporte para TV que puede usarse para distintas medidas. Sí es algo laboriosa su instalación si lo va a hacer una sola persona PERO el cuanto a laboriosa calidad y versatilidad del producto lo pongo 5 estrellas

Toda su manufactura es buena solamente no me gusto que el cuello donde todo descansa es muy delgado. Pero aun asi soporto muy bien mis casi 80kg sin problemas para probarlo y la tele pesa 70kg.