HH-66 Vinyl Cement, 8 oz. can - RH Adhesives

HH66 is a wonderful product and it delivers on its promises. I had a boat lift cover rip through 10 feet of stitching after a major wind storm leaving me the option to take it too a local shop and spend north of $200 and waiting weeks for it to come back. I discovered HH66 after doing some research. It came quickly and I put the cover in my garage and followed the easy to use instructions. I put the product on the area where the stitching was and then reinforced the seam with patches of 5x5 vinyl every 9 inches or so. It dried quickly and I put the cover back on the lift by evening. I believe that glue will hold for ages and the need to restich the area is not required. I did the fix for $20 and a couple of hours of time. I am saving the extra can of HH66 for future repairs on boat covers, patches on water toys and other outdoor cloth products. I am a believer.

This product holds up really well and I use it to fix vases and crafting items but I’m sure it can be used on almost any product!! Initially bought it to repair my house bouncers!!

Our soft side hot tub has an inside/under the water connection which came apart. The picture is of the right angle connector (pre-glue repair) from the air pump to the inflatable perforated ring which circles the inside of the unit. The connector completely came unglued from the side wall causing the air jets to basically be disconnected. We drained, and dried tub, then cleaned off as much of the original adhesive as we could with very gentle scraping and sanding. The glue was carefully applied and left to dry for about 3 weeks before we refilled. I'm sure it would have been fine sooner but we did not have time to deal with a refill. So far it has held wonderfully, no complaints.

I purchased the product because it is advertised as being appropriate for vinyl adhesion.I took on a challenging project of resurfacing my dad's old trombone case. This was a sentimental task for an 80 year old case; so I wasn't looking for perfection.The product adhered great to the flat anterior and posterior surfaces. The curved ends proved to be quite a challenge despite taping or splinting. I ultimately needed other products to assist there. As you can see in the picture, it never properly adhered at the base and will necessitate a repair down the road.Do not use it for thin fabric adhesion because it will bleed through and lead to more clean up. I am not sure that I would purchase again for this type of project but I am pleased with the project overall and appreciate what it could do for me.

Product worked great, a lot better than the stuff I used from Walmart. Sealed up the patch and was fairly simple to use. It does set up quickly with about 2-3 minutes work time. I would buy it again.

We upgraded our pool filter and had to cut out the water output hose from pool to fit new hose size. Well, hubby messed up and also cut a 4-5 inch cut from the circle he cut out! We tried several things to patch hole, nothing worked. Regular pool patch kit has vinyl adhesive. Well this is vinyl cement and worked over everything else we tried. All summer held strong. We actually had to patch the whole 4 inch circle with the 4 inch cut as one big patch. And had to make new hole for our hose. I patched inside and outside with clear vinyl,(always make patch round) then for extra, I took a float that came with our pool, matched the same odd color, cut it, and did that on outside of pool.*** Update*** It's July 2nd, 2020, still holding strong, just like cement. We left our pool up all winter (Michigan) and patch is good as steel. LOOK no further, and stop wasting money on stuff that won't work!!! We wasted 25.00 at least on stuff that didn't work and wasted a few weeks delay for my son to swim, trying to figure out what to do. This was the solution.

First off, I think I got a used or at least a unit that was opened prior to my purchase. The lid was stuck on pretty tight and some adhesive was visible on the outside edge of the rim.This stuff works really well and is very easy to work with for about 10 minutes. It softenes the vinyl and allows the pieces to sort of melt together. My particular application involved clear vinyl and a canvas convertible top. I have to say, the adhesive seems pretty secure after 24 hours but I have not reinstalled and driven yet.Will update after further testing and usage.

I had a large project that consists of vynil and material. This glue was the answer for me. It sets up in nothing flat and the bond is strong. Be sure to use this glue in a WELL ventilated place. The smell is strong.

This PVC cement performs exactly how it says it will. I used it to attach pads for rod holders on my R-I-B and a friend used it to attach davit cleats on his dinghy. These application have stood up very well and we both found the product very easy to use. (It is important that you read and follow the directions for use).

I used it to glue the folded edges down on a heavy pvc cover I made for my narrow boat.You need to glue both surfaces that you are joining for it to work properly. I ended up buying another tin to finish off.If I had bought the next size up I could have saved some money!

Ich habe mit diesem Kleber ein aufblasbares Spielzeug repariert. Es wird dringend empfohlen die Sicherheitsbestimmungen einzuhalten was Belüftung und Umgang damit angeht. Das Ergebnis ist sehr gut, der Flicken hält perfekt, es entweicht keine Luft mehr. Auch das Auftragen mit dem Pinsel im Deckel ging problemlos.

have used in the pasty with great results .

It is difficult to find adhesive that works to bond vinyl to ABS. This bonds very well and is fairly easy to use. It is a bit pricey but worth the money.