Nylon Tube 5/32" 4mm ID Pneumatic Tubing Hose 1/4" OD Fuel Line Black, 10 feet

It works great tuff stuff but if you have sharp bends forget it

Worked well to repair fuel return line that previous owner had cut a 2 foot piece out of .

If came coiled up so I had to pull it straight and leave it out in the sun for a few days to straighten out. it is very stiff and to get it on the fittings I had to heat the brass fittings with a heat gun and then press the hose on. I used it to replace the fuel pick up lines on my jetski it worked perfect because it's so stiff it will stay straight down in the tank.

As long as you want harder tubing that will kink before it will bend this will work. Nylon material is NOT soft and may need a screw adjustable clamp and not a spring clamp for your application depending on PSI. Needs about 4" to bend 90 without kinking. Heating doesn't help form with a bend less, just destroys the tube. Nylon not rubber.

Super rigid and impossible to bend and route without kinking. needs to be heated to even get over a barbed fitting. if you need flexible line that will handle oils, order transmission line.

This product is as I expected. No problems. Very durable also. Not garbage.

This might be the one time I didn’t read a review because I was multitasking. This will not bend, so for a brake like to extend a brake reservoir this won’t work. Not sure what you would use hard line like this for but if that’s what you need it’s great.

everything's good