4681EA2001T Washer Drain Pump OEM Motor Replace for Kenmore & LG Washing Machine Replacement AP5328388 4681EA1007G 4681EA1007D Fit for Drain Pump Washing Machine WM2101HW WM3270CW WM3431HS WM3770HVA

Reliable OEM Replacement – Saved My LG Washer! Review: I purchased the 4681EA2001T OEM Washer Drain Pump Motor Replacement for my LG WM2101HW after it started showing an "OE" error code and wouldn’t drain properly. I’m so glad I went with this part—it’s been a game-changer, and I’m happy to share my experience to help others considering this replacement. Quality and Compatibility (5/5): This pump is an OEM part, so I felt confident it would match the original specs for my LG washer. The listing clearly states it fits models like WM2101HW, WM3270CW, and WM3770HVA, which made my decision easy. The build quality feels solid—the plastic housing and impeller look durable, and the motor itself has a sturdy design. It even came in official packaging with a label (visible in the product image), which gave me peace of mind about its authenticity. Installation (4.5/5): I’m not a professional, but I found the installation straightforward with some online tutorials. It took me about 45 minutes to replace the old pump. You’ll need to tilt the washer, remove the bottom panel, and disconnect the old pump’s hoses and wiring. My only minor complaint is that the pump didn’t come with instructions, so I had to rely on YouTube videos. A small pamphlet with steps would’ve been nice, especially for first-timers. That said, everything lined up perfectly—no leaks or loose connections. Performance (5/5): Since installing this pump a month ago, my washer has been draining like a champ! No more error codes, and it handles full loads without any issues. The pump is quiet during operation, which was a pleasant surprise—I was worried it might be noisy like some aftermarket parts I’ve tried in the past. I’ve run about 15 loads so far, including heavy items like towels, and it’s performing flawlessly. Value for Money (5/5): At the time of purchase, this pump was reasonably priced for an OEM part, and it’s labeled as an "Amazon’s Choice" with over 3K purchases in the past month, which speaks to its popularity. It’s definitely a better deal than paying for a repair service or replacing the entire washer. I’ve read that these pumps typically last 5-10 years with proper care, so I’m hopeful this one will hold up for the long haul. Tips for Buyers: Double-check your washer model for compatibility—this pump fits specific Kenmore and LG models, so make sure yours is listed. Clean out your washer’s drain filter before installing to avoid clogs that could strain the new pump. If you’re on lisinopril (like me for blood pressure), be cautious when lifting the washer—it’s heavy, and you don’t want to spike your BP. I had my partner help with the heavy lifting. Overall: I’m thrilled with this purchase! It saved me from a costly repair and got my washer back to working condition. The 4681EA2001T is a reliable, high-quality replacement that I’d recommend to anyone with a compatible Kenmore or LG washer. I’ll update this review if anything changes, but for now, it’s a solid 5 stars from me!

This part fit perfectly into our washer and resolved the pump problem. It is easy to install if you have directions and follow videos for how to take your washer apart and put it back together. A huge savings by not having to call a repairman to fix our washer.

My LG WM3470HVA front-load washer started intermittently throwing an OE drain error. It wasn’t constant, which made it difficult to diagnose. I first cleaned the drain filter, checked the drain hose for obstructions, verified the water supply, and ran multiple Speed Wash and Rinse & Spin cycles. The washer would sometimes complete a cycle normally and other times stop during the drain/spin phase with an OE error. One thing I noticed was that the drain pump had developed a subtle clicking/grinding sound that wasn’t normal. After removing the original pump, I compared it to the new one. The old pump spun freely by hand, while the new pump had a distinct magnetic “cogging” feel as the impeller rotated. I can’t say that’s a definitive diagnostic test, but the difference between the two was obvious and gave me confidence the original pump had worn internally. Installation took me about 40 minutes. Before installing the new pump, I applied a very light coat of silicone grease to the large O-ring so it would slide into place without twisting or pinching. Since replacing the pump, I’ve run three full loads plus multiple test cycles with zero OE errors. The washer now drains quickly, and the subtle clicking noise from the old pump is completely gone, it sounds normal again. If you’re getting an intermittent OE error and you’ve already ruled out a clogged filter or drain hose, this pump was the fix for me. It fit perfectly and restored my washer to normal operation.

We were getting an “OE” error almost every time we ran our Kenmore Elite front loading washer. We tried cleaning out the filter. That made no difference. Then we cleaned the drain hose. We were still getting the same error about every other time. Finally decided to replace both this and the recirculation pump. There were plenty of videos online to walk me through it. This part was a drop in replacement and was very easy to install. The washer ran first try and and we haven’t see the error in over a week. I can’t speak to reliability or longevity yet, but the noise level and speed are consistent with the original part. I’ll update if we see any issues. Regardless, compared to the price of a new washing machine, I consider this an excellent value.

To all owners of the LG modele WM9000HVA washing machine, I highly recommend this drain pump, It is an original OEM part that works perfectly. I strongly advise against purchasing pumps that do not come with a dedicated, properly installed gasket. I bought a pump with a non-dedicated external gasket and it ruined my LG pump casing and stripped the screw.

My three years old LG signature series washer started giving the OE error code. After some research I identified that the reason might be because the drain pump stopped working. I bought this pump from Amazon, which was delivered in two days. I put the pump in and it fits perfectly. Installation was not easy, but everything worked. It’s been about a month and the washer is still working without any issue. I do think now it drains water a bit faster, possibly due to the new pump.

It worked. This is the 2nd water pump, i have had to change on a 2017 model washing machine. Pain in the butt to get to but that wasnt the pumps fault. It worked. No complaints.

When I saw an OE error and the water wouldn’t drain my first thought was I’m going to have to buy a new washer. Nope. After a little research I found this and it was exactly the correct part to fix my LG washing machine. It was easy to install and came as a complete drain pump unit. I literally just removed the broken part and replaced it with this and it works like a brand new machine!

Took a bit of elbow grease to get the old one out and the new one in, but it looks identical to the original part and works perfectly.

Es igual a la original, solo falta ver la durabilidad. Funciona sin problema.

Easy install and was able to use it up to most recently when the shaft snapped and had to order another one.

No soy tecnico pero viendo videos en youtube encontre como desarmar y reemplazar la bomba de desague y quedo como nueva la lavadora, super recomendable

Funcionó muy perfecto, a muy buen precio, encajo perfecto en mi lavadora