AUTMATCH D Ring Shackle 3/4" Shackles (2 Pack) 41,887Ibs Break Strength, Clevis Shackle with 7/8" Screw Pin and Shackle Isolator Washers Kit for Tow Strap Winch Off Road Vehicle Recovery, Green

These are great really heavy and solidly built the rubber washers cut the noise and save scratches, I have no doubts at all about using these to winch myself or anyone else out no matter what size of the vehicle, my neighbor owns recovery company and these meaty boys are bigger and stronger than his on his truck, really nice and decent price. The color has not faded one little bit and we get ALOT of sun here in NV . You won't be disappointed.UPDATE 12-17-2020 No fade of color and are left on 24/7, pin does rattle loose if not tightened with screwdriver/crescent, but all shackles do, just be sure to check it every wash. Bought another set for rear bumper as well.

Fits OEM tow hook ring for 2019 Subaru Impreza sport 4dr sedan. Ring has a little sway to it. Can not lock into a up or down position. Will naturally rest downwards. Feels very solid and sturdy. Looks great on the car. Easy to install with no special tools. Comes with two in the box with some rubber washers. These were rated for much higher towing lbs than others I was comparing. These are big and strong looking, not the small racing hooks. I will follow up after winter with a report on any rusting.

it's a cheap way to add a little pop to the front of your off road bumper and the rubber isolators help with the banging against the bumper, they seem to be a little more heavy duty than the other shackles I had on of same size. here's a hint to keep someone from stealing them off, after you twist on the bolt run a black zip tie thru they eye of the bolt to the shackle and zip tie together.

I don’t particularly plan on needing these... I mostly got them because they look cool and are nice to have in a pinch. I didn’t want to buy the “racing hooks” because they are strictly for looks and can’t pull any weight.They seem pretty tough, and since they attach to the OEM hooks they shouldn’t damage the vehicle. I had to buy a second pin since my Subaru only comes with one in the vehicle.They don’t tighten super well on the Subaru pin, so I bought a separate pack of 8 washers so the hooks don’t bounce off the vehicle. Since the have rubber on the ends I can’t imagine it would damage the car, but I’d rather avoid the risk, and the noise. Putting this on the bottom side of a truck or Jeep there wouldn’t be an issue.I’ve seen some people drill holes in the covers of the pin hole so it looks a little more flush, but I’d rather not drill any holes so when it’s time to sell I’m not trying to figure something out.I’m happy with it, and I will only change my review if I end up using it and it breaks from the weight.

So haven't gotten to test these on recovery yet, but from initial go over they seem to be sturdy and well made. The isolators have been great, we did have to shave down one side of each of them just a little as otherwise they weren't quite fitting. But no noise, not banging up my bumper, and I like that they came in the color I wanted. Will update the review if anything changes once off road, but pretty happy so far.*3/31/2021 update, these are holding out great. Lost one plastic isolator piece to a recovery in a mud pit (not worth diving in for that), but they've held up beautifully to a couple of recoveries now. Would buy again if we ever lost one for any reason.

I bought this to add some color to my off road bumper. They look great out the box. But the two things I don't like about them. 1 the washers they came with are to thick which i saw the reviews and that seemed to be a common problem. I tried to sand them down but from what I was seeing I would almost have to sand down half on each side. I wish they came with 2 sets. So you could mix the sizes to get your desired fit. Because realistically there rubber and can be but an extra buck or 2 to do so. And just add that money to the price. I had some washers laying around from another set I put on for now. And 2nd i don't feel like that paint will hold up well over time. I believe wants winter hits and they start to salt the roads and the salt hits it. It probably going to come over. I noticed on the bolt when I set it down it scratches easily. So for the $20 something I spend I will see. And will update in a couple months

My traveler recommended buying this brand shackle , because we often travel in jeep , we accidentally found the Autmatch brand shackle to do double protection galvanized + protective layer as they described , before bought a lot shackles has been rusted because there is no galvanized layer , and the shackle is still new , giving the car a cool visual sense. Also the pieces of those products are very competitive . Others do not have a protective cover . This bumpers also do a nice job of noise reduction when the shackles make contact with my steel bumpers . Would not hesitate to purchase again.Super Quality !

These are perfect. The rubber washers and cap are great! They keep the shackles from bouncing around too much and scratching things up or making too much noise.

Yes I did buy the "orange" color shackles... But trust me... They must of Photoshop that picture because their real color is a dull orange... Not matching my Jeep...Otherwise they are normal 3/4" shackles.

They seem of excellent quality for the price.Time over the years will tell how good they areSo far I would buy them again from this seller.They also came very quickly

Super well manufactured. Very strong. Easy to use. The threads for the pin spin easily. Powder coating seems to hold up. Will update once I’ve had it out a few more times to see if they chip.

I had to shave one of the rubber washer on each side yo about half its original thickness to get it to fit together. once it is on they are nice and stiff so they don't swing back and forth hitting the bumper they stay in place but can be moved by hand with a little bit of pressure. very high quality and look amazing

Looks great seems like great build quality and packaging.