MakitaT-01725 Contractor-Grade Bit Set, 70-Pc.

These are not like most bits you buy at Wal-Mart for $10 so you can call yourself a handyman. These do not really warp or bend, they are hard so it's more likely to snap than slightly warp so keep this in mind and use them for what they are meant for and properly.As for the quality of the bits (and I read all the reviews) they ARE up to my high standards of Makita. These have been at my house and arrived when I was building furniture so I instantly checked them out. They came with enough machine oil on them to lube a truck yes but oiling your tools for storage is called proper practise for an enthusiast. Spade bits ripped through the wood like a bullet through tin foil as expected, but the extension is indeed a weak point. It is steel hex shaft connected to an aluminum barrel and SHOULD NOT BE USED FOR IMPACT, maybe light weight stuff like drywall or something or driving a screw into softer woods but don't expect it to take godly abuse. The rest of the bits are great but as said use properly, no shoving a Philips head into a screw at an angle and skipping on the screw, they are meant to be straight and fit in solidly otherwise they will indeed chip or snap, same with the drill bits, hardened metal will snap so drill straight and do not wobble your hands much, the smaller bits especially.For you people checking out the case, yes it's of DECENT quality, 1 layer plastic (not that tough foam or hard plastic) with plastic holders and a single through-bolt like textured rod for the hinge. Do not drop it off a roof or you may end up finding another case for all your new bitsOverall if I do need a replacement set in the future I will reorder these and so far has met all my requirements.Will update in the future if anything happens aka they break like twigs or perform exceptionally well.Update:I have used these extensively the last few weeks with some contractor work and had time to evaluate them. These are so good that I decided to throw my dewalt and Milwaukee sets back in my garage and am now calling them my crappy backup sets. I have ripped through pine, steel, and rounded the head off a few screws just to see if they would hold up and they barely got a scratch. Will be updating my entire set to makita impacts. The aluminum sleeve on the extension has performed far better than expected but I am still waiting for something to happen to it, but won't be too shocked if it stays intact till I decide to stress test it with a 1" paddle bit and some thick oak or pine, either way it probably won't live through those and is not really meant for that.

Great set. The quality of the case is incredible. They even gave me an extra 8 piece set of Phillips #2 bits. I got through those a lot with me being so rough on my tools. I dropped my impact a few times and my old bits got bent, so I when I saw this set for like 50% off, I thought I better get it. Any time I choose the cheap route, it never pays, but all my makita stuff is always great. This set comes with everything I need for around the house fixes.

Everything you need at a great price.

I was looking for a small drill driver bit set. This one fits the bill. It has 2 popular spade bits, adaptors for sockets, common drill bit sizes and the bits I use for deck screws, torx and square driveNo other small set has this variety. I own bigger sets with this and more bits, but most of the time I want something small I can fit in my pocket or mini tool bag and go.I have used the set for about 3 months now and haven't broken any bit.I am deducting 1 star because I dropped the set while open and the closer and 3 bit holders brokeI bought the same set again to replace the case and I now have spare bits and drill bits if anything breaks.Can't beat it for $ 21.00

BOUGHT THIS JUST FOR THE CASE. THERE ARE 21 SLOTS FOR HOLDING QUICK-RELEASE BITS, 7 7 7 AND THERE IS A LITTLE BLUE CLIP THAT KEEPS THE 7 HOLDER RACK TIGHT ONTO THE CASE. LIFTING THE BLUE CLIP LETS THE GRAY PLASTIC FLIP UPWARD TO ENABLE YOU TO REMOVE THE QUICK RELEASE BIT TO BE REMOVED FROM CASE. THERE ARE ALSO 32 HOLES TO HOLD SMALLER BITS THAT ARE NOT QUICK RELEASE BITS. ONLY ONE HOLES IS KINDA LOOSELY HOLDING A BIT, ALL OTHER 31 HOLES HOLD THE BITS SECURELY. THE CASE RECEIVED IS SLIGHTLY DIFFERENT THAN PICTURED, THE 32 HOLES ARE NOT GRAY IN COLOR, ANY MORE, AND THE RIGHT SIDE THAT IS HOLDING THE NUT SETTERS IS NOT THE SAME BLUE AS THE CASE, IT IS BLACK PLASTIC THAT HOLDS THE NUT SETTERS, AND THAT PART CAN BE REMOVED NOW AS WELL. ALL THE BITS THAT CAME WITH THE CASE i REMOVED AND GAVE AWAY TO A PERSON THAT HAD NONE, i ALREADY HAD NUMEROUS S2 STEAL BITS AND JUST WANTED A NICE CASE THAT WOULD HOLD THEM SECURELY, REMOVED THE BLACK HOLDER THAT HELD THE NUT SETTERS AND PLACED OTHER HOLDERS IN THAT AREA AS WELL. THE CASE IS VERY NICELY BUILT, THICK PLASTIC THAT SHOULD LAST MANY YEARS, AND THIS IS THE ONLY CASE i HAVE FOUND ANYWHERE THAT WILL HOLD QUICK RELEASE LONG BITS IN A SECURED LOCKED DOWN POSITION, HAVE MADE THIS CASE MY GRAB AND GO WITH EVERYTHING NEEDED IN ONE CASE, FROM DRILLING, TO COUNTERSINKING, TO A WIDE RANGE OF BITS - SQUARE, PHILLIPS, SLOTTED, TORX HEX EVEN THE HINGE IS A REAL HINGE NOT JUST A PIECE OF PLASTIC BEING BENT THAT WILL BREAK EVENTUALLY, BUT A REAL MOVING HINGE THAT SHOULD LAST FOR YEARS. VERY HAPPY WITH THE PURCHASE

The Makita T-01725 Contractor-Grade Bit Set has quickly become my go-to companion for all things DIY. With 70 pieces of pure versatility, this set covers every conceivable bit I might need, ensuring I'm ready for any project that comes my way. The durability and precision of each bit are truly impressive, making it a contractor-grade essential for professionals and a game-changer for enthusiasts like me. From household fixes to complex woodworking, this set's got it all. If you're serious about getting the job done right the first time, the Makita 70-Pc Bit Set is an absolute must-have in your toolkit!

Absolutely LOVE Makita, they work well and the color is always so pretty to see

Great quality, great price