(Pet) 64440 CeramicEdge Ceramic Coarse Pet Replacement Blade Cutter, Size-Coarse ,Silver

The Oster Fast Feed clippers are well-built, super quiet, and MADE IN THE U.S.A. The ONLY option missing was this Andis Ceramic Edge Course Cutter, to replace the stock Cutter. It took roughly 10 minutes to have everything set up (5 mins remove and replace/5 mins to set the Zero Gap and properly align the blades). I'm a newbie, and I wanted to take my time getting everything set up, if you have experience,n or want to speed the process, you may not need the same amount of time. The Andis Ceramic Edge is VERY sharp! I cut my own hair, simple, almost-skin bald, military-style. The Oster and this new cutter are PERFECT! MY clippers got lower to my scalp; perfect length. The butter-smooth action, ultra-quiet Oster performed flawlessly! Make sure to take your time to set the Zero Gap alignment, if you don't know how to set it, check out YouTube, it's EASY. Asides from the nice contrast look, nice lowered hair length, I took about 20 minutes cutting my hair, I felt ZERO heat from the clippers! I HIGHLY RECOMMEND this Andis Course Ceramic Cutter! Take care to: NOT drop the blade on a hard surface, although it's SUPER SHARP, it's still ceramic, and could get damaged if dropped. Align the blades, oil them up, and enjoy the Oster and Andis combination! If you attempt to Zero Gap your Oster Fast Feed clippers without the Andis Course Ceramic Cutter, it won't be a true Zero Gap. The Andis' teeth are longer than the stock Oster's, which will allow the true Zero Gap.

I purchased this, along with a set of Oster Fast Feed clippers, after reading several articles and watching a few videos on YouTube about how well they complement each other. I've been cutting hair (my own, as well) for over 20 years, and this is by far the best set of clippers I've ever had. When the blade is used to replaced the cutting blade on the Oster Fast Feed, there is no special adjustment required to get a zero gap. Because of the size of the Andis blade, simply setting it where the stock was achieved the zero gap almost automatically. And the cuts, whoa. The fades and tapers I can get require far less time and effort. For the home barber, the Andis/Oster combination is a win-win and you may never want to use another clipper after this. For a combined $75, the clippers and blade pay for themselves within a month (2 if you get hair cuts less frequently). This is a no-brainer if you ask me.

This is the one you need if you are looking to put a ceramic blade on the cordless oster fast feed! The other ceramic blades for oster fast feed (measured by the corded version) are too big for the cordless fast feeds but this one fits perfectly!

Turns old beat blade sets into trimming machines again.

Excellent blade for very smooth blends. This is the popular replacement blade for the Oster Fast Feeds but all clippers are slightly altered each year or two so just depending on how old or new your Fast Feeds are this will fit and zero perfectly or slightly be just a bit to long and impossible to zero without cutting skin as they were on my new 2020/2021 Fast Feeds. So it's a little bit of a gamble you'll have to take. Like I said, they didn't fit properly on mine but some people have no issues at all. The fade when used carefully the one time I used them though was butter. Really disappointing they didn't work out for me. You can "mod" your Fast Feeds by cutting some metal on the inside of the clippers but you have to be precise and I didn't want to go that route seeing as I have other clippers to do different areas of the fade so I now use my Fast Feeds with the original stock metal blade and its works great still on fades just not quite as sharp and buttery smooth like the ceramic blade was. Hope this helps someone. Good luck.

Buena claidad

I'm a professional barber and have been using these blades for over 6 years. (see photos, forgive the paint wear, these are well used!) A lot of reviewers are not professionals and they don't know how to assemble their blades and one recent review thinks this is plastic. It is ceramic. That means it won't bind up like metal on metal clipper blades, it will not heat up and it will last much longer (provided you do not drop your clippers.) I have bought MANY of these blades and used them in my Oster 76/Model 10 and Andis blades, replacing old metal blades that have bound up and upgraded my fast feeds with one -as shown (there is now a better option for the fast feeds that fits without modding the housing!) Here's what non-professionals need to know. When you replace the blade, make sure it is perfectly aligned with the metal teeth and only a tiny fraction below the top teeth, NO overhang and not too far in. Diagonal alignment will make the clippers bind up and pull hair. Apply a drop of semi permanent lock-tite in the screws to keep the blade from vibrating loose. Also ALWAYS brush your blades thoroughly after use and oil them by dropping two drops of clipper oil into the teeth while the clipper is on and moving. If you are going to store them for more than a week, you will also want to oil the rails, anywhere there is friction. Then brush them and oil them again before use. You don't have to do that much maintenance if you use them every day, but if they're stored, dusty or just unused and cold you'll want fresh oil. Those two things will keep your blades running smoothly for YEARS!

Super easy to install, and much sharper than the default blade. However using the OSTER Fast Feed, the side to side movement a) rubs on the plastic and b) makes the blade guards come off. So overall great product if used individually, but doesn't work with the attatchments.

sostituisco la lama di metallo con questa e finalmente posso radere senza dovermi preoccupare di affilare le lame, la uso da 8 anni con la testina da 10, ora voglio provare a sostituirla anche su quella da 9 e sulla 5f vi farò sapere! ovviamente bisogna averne più cura perché se vi cade la tosatrice.. se vi va bene rompete un dentino (a me è successo ma la lama tagliava ugualmente) ma se vi va male… la rompete completamente e dovete sostituirla!

La compre para hacer cero gap con la oster fast feed, el producto es original #64440 Corta muy bien pero creía que tardaría más en calentarse pero supongo que debo mejorar mis tiempos 👍

Formidabili, sia nella precisione che nella durabilità. Da provare al posto delle classiche in acciaio, diventeranno un must!

So I bought 2 years ago this to upgrade my Oster Fast Feed trimmer because it wasn’t cutting close enough (had to do some research to find if mine was compatible). With this little add on, it cuts super close! And the quality is outstanding since the cutting edge is sharp as day one and has not stained or discolored. Posted some pictures after 2 years of use, and to show how close it cuts. If you have a compatible trimmer, this ceramic blade is primo... not to mention it makes a black trimmer look great! A worthwhile upgrade for sure. Kudos to Andis for a great product.

Muy buen producto, excelente calidad en el material