All Around 360° Sunbath and Lower Support Safety Iron Cat Window Perch, Cat Hammock Window Seat for Any Cats (M, Gold)

Very sturdy, easy to install. I placed some clear gorilla tape across the top of each suction cup (and window) and haven't had any issues. Worked so well, I ordered another. While cat sitting for my daughter, her two fat cats (17.9 lbs and 16.5 lbs) were on it at the same time. I was concerned it would fall but didn't and hasn't. Not sure about the 50 lb rating but it will support 33 lbs 14 ounces

I bought this the end of December 2020. I put this on the right side of the patio door--about 2.5 feet from the floor. I selected this one b/c the supports are below the actual perch so she would not crash into them jumping onto the perch or play with them while on the perch and possible dislodge the whole thing.My cat (bengal/main coone runt--that is NOT a runt anymore at 12.5 lbs) was not sure about this at first. She is so cautious about new things that I had to kind of "guide her through" jumping on it the first couple of times by hoisting her on it. She started out jumping on from the sides to avoid crashing into the glass, but now she is confident and jumps on it dead on perpendicular to the glass patio! OH--she gained at least 4 lbs. since I first got it and it is still strong and sturdy. (I think she actually doubled her weight since I got it--Mom loves giving her treats...)She has been trained to jump up there to let my parents (and me) get her collar on her to let her out the door. (At their age, Mom and Dad can't safely bend over, and Mom CANNOT pick her up anymore). Now she jumps up there and meows to signal her desire to go out the door-- so I guess we are now trained! But she also jumps up there to just look out into the back yard or sunbathe.Very Sturdy and Dependable. I have only taken the seat off the glass once to clean it, and that was in the Spring. The suction cups have not come off on their own. The metal support "stick" inserts stay in just fine. The only time they fell out was when I bumped it or pulled them out to completely close the blind a couple of times. When I did that it laid flat to the glass until I reinserted the support sticks. They have never come out when Gracie has jumped on it from any angle, so far. I live on the border of climate zone 4 and 5 if you are wondering about temperature changes. And I live in Iowa, so the temps change A LOT.I am planning to get another one to put on the middle glass panel of my patio door, at a higher height, so she can jump from the first one to that one and get some of her jungle energy worked out! Or to put in the glassed in front porch for her. It is cheaper alternative to the wooden cat shelves I see on "My Cat From Hell."I hope that information helps you!

The first problem is that this thing has caused The Great Cat War of 2023. Now I have to buy another one because whichever cat gets up on this thing immediately becomes a tyrant throwing slappity slaps at the lowly peasants beneath them.The second and more minor issue is that the little metal bars rely on gravity to keep them in place against the part that the cats sit on. Maybe this is fine for graceful and well-mannered cats but my clumsy savages wrestle around and are NOT graceful. One little bump in an upwards direction makes it collapse if nobody is sitting on it to weigh it down. The metal bits are slightly curved but it's not quite enough to keep it snug. I've made some little rubber stoppers for the ends out of hot glue and that seems to have solved it for the time being. I could see tape or anything else with some kind of grip working just fine too.The instructions were fine. They even have detailed graphics. The box it came in is actually so cute I'm saving it to use as a gift box later.So far the suction seems fine and it's stable. I've only had it for about a day so we'll see how it holds up!

Okay, so I have some positive things to say, and a few negative things to say. Overall, I think this is a pretty decent buy. I would recommend it.PROS: As you can see in the pic, I got a pretty big boy and he is able to sit on it with ease (it’s not bending I promise, I am just dumb and didn’t put it up straight). That is 100% a win in my book because I was terrified it wouldn’t hold him and it does!! Also, the suction cups stuck instantly to the window, but they are not a pain to remove if you want to move it.CONS: The instructions are USELESS and WRONG. I repeat: THE INSTRUCTIONS ARE WRONG. First, it doesn’t tell you that before you connect the two “U” brackets, you need to slide each side into the two pockets on the mesh. (Pain in the butt to do btw, if you have someone to help it would be better) Then it ACTIVELY gives you the WRONG information by saying make sure the holes are facing up. THE HOLES NEED TO BE FACING DOWN. The iron bars have to hook into the holes on the underneath, so idk why it says up but it is wrong. I literally have my mesh upside down because, like I said, it said holes facing up and I put the top of the mesh facing up, and the mesh is too much of a pain to try to redo.Once the brackets are connected inside of the mesh and the Velcro fastened, attach the suctions to the bars on the “U” brackets and attach to the widow. Do not try to attach the bars before putting base on the window because it will not work well. Work one side at a time with the bottom by hooking the metal bars into the suction cup (part with the 90 degree angle goes on the cup) attaching cup to window, and then pushing it up under the base and into the hole. If you find that putting in the second bar causes the first bar you put in to fall out, it means your second suction cup is up too high and is pushing the base up too far. Just lower the second suction cup until both bars stay. It is surprisingly sturdy even though you think it won’t be when you are putting it together.TL;DR: before connecting “U” brackets, slide each “U” prong into the mesh pockets, with the holes facing the bottom side of the mesh, which has the Velcro part. Attach base part to window before fooling with the support bars. If your first metal bar keeps falling out while you are trying to connect the the second one, the second bar’s suction cup is too high and just needs to be brought down a little.

My cat instantly became obsessed with this, she jumps on it immediately as soon as I put it up each morning and spends most of the day there. She loves to sit on it and look/sniff out the window and nap there when the sun comes through the window. I didn't expect it to be such a massive favourite but it was an awesome purchase! She's so happy :')

Solo pedí 1 pieza, pues primero tendría que confirmar que las reseñas eran correctas.Es muy resistente, eso sí a las ventosas las humedecí un poco para que fijaran mejor.Pueden bajarse las brillas y así lograr cerrar la cortina o persiana cual sea tu caso.A mis gatos les gustó mucho, primero dejé que solo ellos explorarán, luego les ayudé pues necesitan algo dónde puedan impulsarse para subir, ya que no tenían nada cerca, pero esto ya es secundario. Lo recomiendo mucho.

Excelente a mi gato le encanta

The cats love it. It replaces a window bed that constantly fell down because the suction cups wouldn't stick. The design of this makes it super sturdy. Great quality.

Die Fensterliege ist sehr gut verarbeitet und stabil, gutes Preis- Leistungsverhältnis für € 20 Kaufpreis. Aber mein Kater liebt dzt die Verpackung, in der die Liege geliefert wurde, fast noch mehr.. er liegt Tag und Nacht in dieser Kartonschachtel 😅🙈