Fujipoly/mod/smart Extreme X-e Thermal Pad - 100 x 15 x 0.5 - Thermal Conductivity 11.0 W/mK

I purchased one of each the 0.5mm and 1.0mm Fujipoly Thermal pads, and the reviews will be the same.These thermal pads are good quality, and have some elasticity, so they won't crack or break if they're stretched and squashed a little under pressure or shear forces (which is good). They also seem to have good cooling properties, although that claim is just from measuring temps after installing them, not from testing their thermal conductance.One thing is that these aren't really that sticky. I applied them to a clean surface, and while they adhered, it was quite easy to move and remove them. So easy, in fact, that it was difficult to remove the backside plastic covering before seating the heatsink; I would inadvertently end up lifting and moving the actual thermal pad while trying to remove the plastic. The lack of adhesive doesn't matter much once the heatsink is installed and cinched down — the pads aren't going anywhere at that point — it just makes it a little more difficult to apply and install.Overall a quality product, although I'm wondering if I didn't get an older batch whose adhesive had dried up.

I wanted to write this review for any other LG V20 Smartphone owners who may be looking to fix the overheating / throttling issues with the device and prolong it's longevity. This thermal pad will work excellently for these purposes and will make a noticeable difference in the performance of your device. Simply cut it to the size of the copper pad in the heatsink area of the device and apply it like double-sided tape (remove plastic film from sticky side, adhere, remove remaining plastic film).Once you apply it, you can place the board back in position and put some pressure on it to adhere it and make decent contact.I would recommend this thermal pad for any V20 owner, it will help even those who do not notice any issues.As a thermal pad it functions and performs as it should.

These thermal pads really do there job, I did a ps4 for a friend of mine and I have to say between this and the new thermal paste that I have put on for him, the system runs a whole lot cooler and more effective now. I was going to get the 17 w.k but my friend did not have the extra to spend on them, so I got him these. I cannot say how well the 17w.k pads work, but I can say that the 11 w.k works amazing for the system. So if you want to redo the pads on a ps4 or any game system and don't have the extra to spend on the 17 w.k, the 11 w.k are well worth the money. P.S depending on the ps4 model number you will have to get two of these pads, the older ps4s have 16 ram chips, 8 on top and 8 on the bottom. So I would look up the system number to see how many chips you will have.

This is an excellent alternative to thermal paste to help cool off a CPU. In my LG V20, we were experiencing slow downs due to the SD820 processor overheating- apparently the thermal paste they use in the factory breaks down over time and really makes the phone run hot. Thankfully that phone is really easy to open up, and applying this where the paste used to be really makes a difference.The CPU stays much cooler now, the UI feels snappier and my benchmark scores have improved as a result. This stuff is great!

This is by far one of the best Thermal pads I have used so far.My old Dell Studio XPS 1340 laptop was running hot and I ordered this thermal pad after quite a bit of research. There was a slight gap between the die and the heat sink, hence thermal paste was not an option.I am using this pad for both my CPU and GPU and this has reduced the temperature by a good 15 - 20 degrees.I highly recommend this over the cheaper $5 - $6 options.

Overall pretty good with cooling. Used it on my Alienware laptop since it was overheating while gaming. Used these strips along side some grizzly thermal paste and everything runs about 10c - 15c cooler now while gaming.

Easy to cut, but do not stick very well; although when everything is clamped down they don't move and so it's not that big of a deal. They are quite expensive, but then again they are among the best on the market.They do provide better thermal conductivity than the stock Dell pads I replaced in my Alienware laptop.Overall, I am satisfied with my purchase.

I purchased this to replace the thermal paste in my LG V20. This is the perfect thickness for the application and has greatly improved the phone's performance. The phone is much less likely to throttle the CPU performance due to high temperatures. So, in a nutshell, this did exactly what it was intended to do. And I had plenty left over for about 4 more phones!