Scosche MAGFM-2PXCES0 MagicMount Flush Magnetic Car Mount, Universal Cell Phone Holder for Car Dashboard & Flat Surfaces, Easy Magnet Mounting for iPhone, iPad, Smartphones, Tablets & More (Pack of 2)

Plain and simple - It works, and it works well. My phone doesn't budge against this mount...it's 💪. I put mine on a Proclips mount and it marries flawlessly. Im sure this will marry with just about any mount or dash with a flat surface. Buy it, love it, and thank me later.

I've had this since March (now August) and I've had to retape this to my dash 3 times now. We've had a really hot summer obviously and I've used a windshield shade even, but still you start to notice the edges of the tape underneath pulling up after a few days and over the course of a few weeks it just slowly starts to lose it's adhesion. I'm trying to find a better tape that might work with higher temps as the mount itself is simple and works fine - the magnets could be a lot stronger as well so it's all around a bit meh unfortunately.Granted, the mounting point I need to use (not a lot of space for it on my old 90's Celica) is textured and on the top of the dash so it's in direct sunlight combined with my phone hanging off at the furthest angle from it to add the most offset of weight possible, so the scenario is a bit stacked against it.I have the Yosh pucks in my other car and they've always just worked - never had them come off the dash and magnets are crazy strong...practically yank the phone out of your hand. I had to add in the included metal plates inside my case to improve the hold on this mount or it wouldn't hold my Moto Stylus well enough for even a slight bump in the road, now the Yosh ones in our other car hold it almost too well lol. There's a sweet spot you have to find where it will hold pretty decently, but since it's not quite strong enough to pull it into the right spot on its own.

I’ve been looking for a car mount to safely hold my phone while using maps for directions that would be low-profile, could sit horizontally on the dash, and was easy on/off for my phone.Pros:• Adhesion seems good so far. I have a wide, flat horizontal space on my dash in front of one of the screens where it sits perfectly - can’t comment on how it sticks to a textured or curved dash. I applied it in winter but waited until the afternoon so it wasn’t freezing cold - we’ll see how it does in summer, but so far so good.• Perfect amount of “stick” to the magnet. My iPhone X is held securely with no wobbling but can also be pulled off easily if needed. I put the magnet sticker on the back of my phone case, below my phone holder, and it works great. I like not fumbling with clamping it in, like other mounts.• If you place the sticker in the center of the phone, you could pop the phone on either vertically or horizontally• Locking ring means I can twist it tight and it will stay in position without coming loose, rattling around, or starting to droop while driving.Cons:• Would have been nice if it folded away or popped off the mount for storage when not using it; I guess I could have gotten the suction version but they’re notorious for not sticking well.• Of course, only phones with the magnetic sticker on them can use it; not great for road trips with multiple drivers using their own phones to navigate or listen to music. Would have been nice if they included extra magnet stickers so multiple people in the household could add it to their phones, or to use if you get a new phone/case.Overall a low-profile, secure mount that’s easy on-and-off so I can read directions safely.

The media could not be loaded.  As per instructions, I cleaned the dash and bent the tabs to conform to a curved surface, but the adhesive pad would not hold. The holder fell off almost immediately. I tried several more times to get it to stay but no luck. I wasn't able to remove the old adhesive pad so I layered the extra pad (included) on top of it. I mounted this time horizontaly to the top of the dash. It seems to be holding, only problem is, the two layers of gray adhesive shows between my black dash and the black mount. I used a black Sharpie to darken the edges and it looks better. I plan to use a fine point brush and black paint to cover the gray that I couldn't reach with the Sharpie.Since I had to move the mount, I also had to relocate the metal plate that I had attached to the lower portion of my phone case. I carefully peeled it off and repositioned it horizontaly in the middle. It seems to be adhering well, but time will tell. I waited 24 hrs to use the holder and it feels stable. It doesn't have to support the full weight of my phone since the edge is resting on the dash. The magnet holds my phone steady and I'm happy with it, even though I couldn't get it to stay where I originally wanted to mount it.

Works really well and is easy to use. Magnet is strong. Only thing is that it blocks the vent

Metal plate is a little on thick side but the hold to the stand is incredible 😲 super strong hold. Definitely impressed. Highly recommend.

I drive a 2005 Peterbilt 379 Semi.I needed a phone mount the could fix to the top of the dash rather than the window. This mount comes with a mounting disc with 3M foam adhiesive that is super secure. The suction cup of the mount then sticks to the disc. The arm of the mount is bendy and can be positioned in many orientations depending on your needs.I drive off road regularly and my phone has never fallen off the magnetic attachment point while bouncing around in the cab.If you're looking for a simple and cost effective magnetic phone mounting solution I highly recommend this one.

Je recommande

Muy recomendado para celulares medianos

I’ve used the phone magnet mount, clasp mount, gps mount… everything about them all was perfect. My dash is made up of a material/finish that made it hard to mount factory garmin mounts.