YWY Upgrade Angle Grinder stand Universal Bracket Polishing Machine Conversion Cutting Machine Multifunctional Desktop Pull Rod Angle Grinding Machine Stand for 100 115 125mm Angle Grinder

This product was easy to set up and worked well

For the price its built fairly good. Don't get me wrong, it is definitely Chineseum, but on the better side. I am using this to cut off small stainless bolts and furniture nuts which it works well for. This won't replace a big chop saw but is much more portable. There is some play in the arm but mine was acceptable. As noted by other reviewers, the instructions are lacking in detail especially adjusting for your grinder. This does not fit grinders with their switch on top as that side goes against the arm, however, a paddle switch grinder with trigger lock works great. Another reviewer made an assembly and setup video that was very helpful and I highly suggest anyone purchasing watches. This is so adjustable/ adaptable to fit so many grinders that it could be difficult for some to assembly and adjust.

Set it up and worked great for my cordless grinder. Will be a handy option for that little job instead of dragging out the big cutter or saw.

I am not sure about the one star complaints that people have given to this product. When I received it, I was duly impressed with the quality and construction, although I know it comes from China. It arrived on time, and was very well packaged, including parts that were bubble wrapped. I actually ended up putting it together without the instructions, something that anyone could’ve done with minimal mechanical abilities. I ended up putting my Milwaukee variable speed 5 inch grinder into this unit. I was surprisingly amazed at how well everything fit in and how secure it held my grinder. I did square it up, using a machinist square and tightened all the nuts and boats. There are two adjustable arms that attached to the points on my grinder where you normally screw in the supporting handle. Because the grinder is set up for left or right handed use, both supporting screws tighten everything up securely once I squared the cutting wheel. I used it to cut several 20 gauge garage door support beams with ease and no problem. I also did several cuts with extruded aluminum. The sliding arm is pretty sturdy and works as well as my Bosch compound sliding miter saw. For the price of this unit, it is well worth the purchase!

Well, first of all, it's made in China so that tells you a lot. Good luck putting it together. No instructions to speak of. All the parts are just crammed in a bag and it's up to you to figure out how it goes together. Took me most of an afternoon and I'm fairly adept with mechanical things. Still had a few pieces left over with no idea where they go. I would be real careful using this thing as it seems sort of wonky and wobbly. I'm going to buy a cheap 4 1/2 grinder and figure out a way to mount it permanently. Probably good for light duty, occasional use, but definitely not heavy duty.

It’s a surprisingly well made metal stand that kinda makes your angle grinder into a mini sliding saw. I used it to cut some steel and aluminum angles and trim. It worked great. It does require some “sweat equity” prior to use as you try to figure out the assembly picture. It was a bit daunting,Its small diagram and a good number of small parts to match up to the picture. I looked at the bag of parts and the small diagram and quickly threw in the towel on the paper instructions and turned to the ever life saving YouTube! Type in angel grinder stand and poof….. there are several unboxing and assembly vids that turned it into a very quick and easy process. Being able to follow along and pausing video as needed made it sooooo much easier! Really happy with the way it kept cuts clean and straight.

This is perfect for what I needed for keeping cuts clean and true using an angle grinder. Also, much smaller, cheaper and convient than an abrasive cut-off saw - perfect for small projects. I put it together and used began using it immediately. It took a little tweaking to get grinder blade plumb but that was a simple matter of adjusting some of the screws. The clamps held the grinder tight with no need to adjust after many cuts. I used it on 1"x1" angle iron and it fit without a problem. You would have difficulty accommodating something much larger. It seems pretty sturdy but time will tell. It comes basically assembled but there are some important parts you have to attach. The instructions are pretty poor - that's why 4 stars not 5. However, taking your time you can figure it out and there are some pretty good videos out on the web showing how to put it together. One thing I would add are memory locks for the bolts that hold the grinder, so you can keep the settings when you remove the grinder. Other than that, a great little tool.

Solid item needed to cut precise sizing in metal with angle grinder , did the job

The overall device feels like it is good quality, but was missing some washers, had some extra and different pieces than illustrated. As noted by others the instructions could be better for size of graphics and clarity of the text. and

Have not used yet because no instructions in English

No he podido hacer cortes a escuadra, el sistema de ajuste es impreciso

Bin fasziniert, wie gut das Teil funktioniert. Echt präzise und super in der Handhabung. Auch der weite Arbeitsbereich ermöglicht genügend Platz für Gehrungsschnitte, was bei anderen Ständern ein Problem ist. Vielleicht hilfreich für Andere: Es lassen sich auch Winkelschleifer befestigen, deren Gewinde für den Griff nicht genau 180° gegenüberliegen, also etwas schräg nach vorne zeigen, wie bei meinem Modell von Flex. Einzig eine Sache wäre zu erwähnen, die schief gehen kann. Die untere Schraube zum Feinjustieren drückt fast auf den Arretierungsknopf für den Scheibenwechsel. Glücklicherweise dreht sich die Scheibe trotzdem ohne Probleme.