Teensy 3.2 (with Pins)

A huge upgrade from the ancient Atmega328p processor chips I'd been using in my projects. Far faster, more I/Os, more HW UARTs... and this module really doesn't take up much more PCB space than the old 328p chip in the DIP package itself. It integrated seamlessly into the Arduino IDE and only minor code changes to SW were required.

This one offers 16 bit analog inputs and a 12 bit analog output. That sets it apart from most of the arduino type controller boards. The software support and community are fantastic.

Very fast, has many popular libraries for driving displays using adafruit libs, code is very compatible with Arduino--some small discrepancies here and there, but nothing i couldn't find a comparable solution. You can use Arduino IDE to program--just download a free plug in. This unit is a 3.3v but is 5v tolerant on the inputs. Some cool features you can write to the analog ports (sin wave generator) analogread can be configured for 12 bit resolution analogread can be configured to automatically average x samples has several serial ports (and you can use 0 and 1) very very very fast (overclock to 120 mhz) has built in RTC you need to solder on a crystal and backup battery Touch read pins(i've not tried these yet) analog can be used as digital inputs (10 analog, 24 digital--more if you solder pins on bottom) very very very fast (overclock to 120 mhz) Very good forum support I have 2 and will buy more

I bought this to build a custom PC controller. The Teensy is great for that sort of thing, and I am very excited to see what other projects this controller can be used for. I will definitely buy it again!

Not only is it fast, but it has USB/HID built into it. That lets you use it as a game controller. Got a favorite joystick that's stopped working? Replace the old controller board with a Teensy 3.2 board. This board can give you all this & more; • 32 Buttons • 6 Axis (X, Y, Z, Rotate Z, Left Slider, Right Slider) • 1 Hat Switch There's even a usable sample code that lets you use the Teensy as a joystick controler - pjrc.com/teensy/td_joystick.html . There are reasons to buy this with, and without the pins attached. If you're new to Arduinos, the attached pins make it easy to use with a breadboard. Also, you won't save all that much money if you buy one without the pins attached. On the other hand, if you know what you're doing, the board without the pins may be easier to build into a project.

It's teensy, works well, nicely integrated with the arduino software. Some of the circuit examples on pjrc.com need some updates to work with the 3.3v levels on the Teensy 3.x boards, but that's not a problem with the product.

1. USB header fell off with relatively minor stress. I have other boards like the Huzzah Feather and have had no problems. I ordered another, but without pins because I decided I wanted to be able to stack. 2. The board card does not use standard SPI pin designators, so you have to infer which is MISO/MOSI 3. After being spoiled by places like Adafruit, I found the PJRC website documentation to be disappointing. On the plus side. 1 Integration into Arduino IDE was easy 2. Fast board. DAC is a nice feature 3. Gold plated PCB is a nice touch.

For its size and power, this is the best microcontroller currently out there in my opinion. The developer community is strong and PJRC is really devoted to supporting this device. The only thing I wish this had was a DSP chunk on the ARM since this series does have that as an option. I'm sure the decision not to do it was done for a reason, but it would have been cool to have it. Nevertheless, an amazingly great microcontroller. My go-to when building things.

Works well. You need a breadboard for starters if its your first purchase like it was for us. We bought it along with the elegoo starter kit which comes with wires and leds etc. There are numerous websites with helpful tutorials etc but we bought ours with a propshield for a homemade lightsaber project and are struggling to find tutorials for the teensy + propshield combination. The propshield adds all sorts of sensors to the teensy which we are struggling to figure out. So be warned if you are a new to this like us.

Die Lieferung war ziemlich schnell, 1,5 Arbeitstage. Das Board ist komplett in Ordnung, lässt sich über Arduino IDE programmieren, mit Zusatz von Teensyduino add-on. Das einzige Problem ist zur Zeit, die aktuelle Version 1.50 von Teensyduino funktioniert nicht mit der aktuellen Version 1.8.12 von Arduino-IDE. Hier entweder die ältere Arduino-IDE Version nehmen, oder die neue Teensyduino Beta Version.

I benefited both from the high speed (96MHz) and the 5V tolerant digital pins of this board. If the final solution doesn't require all the bells and whistles of the teensy 3.2 then sometimes it's possible switch to its highly compatible low cost version: the teensy LC.

Sauber verarbeitet, keine Probleme. Klare Weiterempfehlung

Bis dato ist nun der zweite Tennsy an meiner Filtrationsmaschine im Einsatz, der erste ist leider nach einem halben Jahr durchgebrannt. Allerdings wird er bei der Filtration auch von säurehaltigen Dämpfen beansprucht, weshalb ich nun ein Gehäuse gebaut habe, hoffe NR 2 hält länger. Ansonsten sehr zufrieden!