Caster Wheels, 3" Locking Swivel Threaded Stem Casters Set of 4 | 3/8"-16 x 1" (Screw Diameter 3/8", Length 1")Rubber Casters with 360 Degree No Noise Wheels for Furniture and Workbench

Great set of caster wheels that roll smoothly and quietly. Installation was straightforward, and the included hardware made setup easy. Once installed, they feel solid and support weight well without wobbling. The locking feature works reliably, and the rubber wheels glide nicely across hard floors without leaving marks or making much noise. Perfect for workbenches, cabinets, carts, or other shop furniture that needs mobility. Excellent value for the quality and durability.

No nonsense hardware. Functional, not a heavy duty part as the wheels are plastic. It serves my purpose for a hospital table that is only supposed to hold 50 lbs. anyway. Took 10 minutes to change. Nice added parts wrench (which I really liked because I didn’t have to pull out a tool chest and fiddle around) Great idea! Nuts and lock washers. A thought out product. One Caution The Bearings Are Exposed not sealed. Nothing wrong with that but it does require lubricant. And something that will not attract dust like a PTFE. Lubricant is a must before use!

Very good product: the specs were 100% accurate and the wheels are well made. Super easy to install and they roll smoothly.

Fit my shelves perfectly. It is much better to buy these separately than find a shelf with them included. The price is much better and these are nice quality casters. The brakes work well and are easy to use.

I've purchased 5 sets of these casters over the last 10 years and they have been infallible. While transporting a shelf unit full of books on the original gray casters over carpet, a wheel cracked open and I had to struggle to keep the shelf from falling. I replaced the casters with the above type and the metal shelf is almost indestructible. With this set, I lubricated the stem before screwing it in to allow easier removal later. They are quiet, built like a tank and a bargain at this price!

I ordered Caster Wheels, 3 Inch Casters Set of 4, Threaded Stem 3/8"-16 x 1 (Screw Diameter 3/8", Length 1") Polyurethane Locking Swivel Castors,Heavy Duty Caster with Brake Wheels for Furniture and Workbench ( https://www.amazon.com/dp/B0FBGWDM1J ) AND HOLKIE Caster Wheels 3 inch Locking Casters Set of 4, Threaded Stem 3/8" -16 x 1-1/2" (Diameter 3/8", Length 1-1/2") Swivel Heavy Duty Castors Gray ( https://www.amazon.com/dp/B09GFDSRMD ) at the same time. We are organizing our basement. Normally, we buy new shelving units that come with casters, but have been buying used ones to save on money as the prices remain ridiculously high for new ones. For our 24" deep shelves, we use 4" casters. We bought 3" casters for the 18" deep shelves, since the expensive ones come with 3" wheels. Comparing the Holkie and the others that say they're 'Brand: WHARSTM', which are orange, and I'll just call the orange ones, the Holkie seem like they're a lower quality. The gray area on the Holkie is way less thick. The orange ones have a lot more cushioning. One reason I preferred the thicker cushioning was on the off chance that I run into a pebble or small stone, I think the orange one would go over it easier and not push it along like the Holkie might. While the basement is concrete, it's nice and smooth and I don't want to scratch or gouge it. The cushioning just seems better. The orange ones also 'feel' better, if that makes sense, they have more heft. The set of 4 Holkie is $18 (Black Friday Deal $15), and the orange ones are $12 (Black Friday Deal $10) So, in price the orange ones are better also. Both sets have 4 locking wheels, which is nice. Most of the shelving units I bought that came with wheels have 2 locking and 2 non locking. The height of both sets is accurate, and they are the same. The orange ones come with a lock washer and a lock nut installed on each. We didn't use the extra pieces. There is one big difference between the 2, and it's the length of the 'all thread'. The Holkie has a 1.5" shaft and the orange ones have 1". Both shafts are 3/8". At first I thought this meant the Holkie are better, but for my purposes, the shaft size didn't matter. If the orange ones had a 1.5" shaft, they'd be 5 stars for me. The Holkie, I think is below average. If you prefer less tread, and need a longer shaft, the Holkie might be better for you. Our crew chose the orange ones unanimously. I ordered 2 of each set because I needed 6 of each, and quality was more important than price. I thought I'd use all of them on the racks I'm putting together. After seeing them side by side, I returned the Holkie without installing them, installed the orange ones and I am ordering more while they're on sale. The orange ones move smoothly and they're quiet. We're using wire racks in a large 10 foot wide room. I'm 'doubling up' the racks. I used 1 each 4' set and 3' set, and instead of using 4 posts on each for a total of 8, I put them together so the 3 and 4' shelves share a center set of poles. This used 6 posts, and allows the posts and casters to go further. I'm putting one 10' rack against the back wall and the 7' shelves 30-36' in front of that one, then another in front of that one, so there is an 'aisle' down one side and 'aisles' between every 2 shelves. This works well, especially because there is no wasted space with the different size bins we use to store things in.

They work great for the holder for those large black with orange tops containers they sell at Costco! What a life saver. Life made easy! Fits like a glove, easy to place on and I love the orange color. If I ever need wheels again, I’ll buy them from you. Thank you very much.

My wire rack shelves use a 3/8-16 bolt hole. I need to be able to move the shelf unit around with a few hundred pounds loaded on it. These casters were a bit larger than I imabined and this was a good thing. They are easy to install and includes a small wrench included in the package. They roll easily and lock. I will probably buy again if I need more.

Este producto se compró como reemplazo de un silla wc portátil para adulto. Quedo muy bien, muy buena calidad. Llego en tiempo y forma. Recomendado.

Does the job. Was what I expected. Good quality.

I installed these 3/8 wheels on a newly purchased 12T shop press. That unit is quite heavy and needs to be stowed away when not in use. Drilling new holes in the press frame was the hardest part of the job. A step drill bit is your best friend for that. Installation of the wheels itself is made easy with a 14mm long socket wrench in conjunction with the included thin wrench. The wheels are made with quality rubber and the swivel is good. However, the locking mechanism doesn’t lock the swivel unlike some more expensive wheels. The inner wheel bearing feels flimsy, the wheel has some side play in it. I am confident that if you don’t overload these wheels, you will get a good service life out of them.

odorless unlike some other casters fit fine, easy to put on, smooth action under a dryer though, the brakes can't be locked with your feet you have to use your hands

Good quality casters complete with locking mechanism and high grade rubber wheels. I installed 4 of these on the metal frame of my commercial grade planer (approximately 200kg/500lbs). Rolls easily and quietly on my concrete floor. Fastened securely via 3/8” threaded posts, locking washers, and nuts (all included with this purchase). Anyone complaining that the posts bend too easy easily didn’t install them properly. These casters are as well built as any on the market. I will buy them again as I acquire more equipment for my shop.