Burnaby Manufacturing Ltd BBQSS75 3/4" Box Gas Outlet, 3/4-Inch, Stainless Steel

I had not seen one of these quick connects with integrated valve and receptacle cover before. This design works great, and the included 1/2-inch male connector worked well for my added gate valve that I added to my hose from the grill.The brass fittings and connector were stout enough after attached to the 1/2-inch black pipe that they didn't need any support. The stainless steel housing slipped behind the valve and fittings and attached to the brick wall to conceal the fittings. I just used masonry fasteners, but the included fasteners they provided with standoffs were very good too.One reviewer mentioned sharp edges on the stampings. I only found one edge on the horizontal top of the cover with a burr, so I ran emory cloth/scotch brite over all the edges just to clean everything up. I had no trouble drilling extra holes or using a regular file to file more clearance to an edge of the first brass fitting.The cover does open 135 degrees, and it even stays up on its own. Very handy when you make the gas connection. For this 1/2-inch size, the clearance for my finger and thumb to pull back the collar was fine. I made sure the cover was not biased too much left. It would have been better to bias the cover to the left, so that the valve handle leave the cover door slightly adjar. The tapered cover did not close all the way because cover stopped at the valve handle. Probably this one size stamping is used for 3/8, 1/2, and 3/4-nch designs, and the bigger ones barely fit.I added that big black gate valve to the included male fitting that you see in the pictures. That way my 24-foot PVC line to the grill doesn't need priming every time I hook up the grill (mine goes back in the garage each evening). I added a 2-1/2 inch brass nipple so that it extends out of the box with the cover closed when using.I'm really happy with how the installation turned out. I'm glad it is all CSA certified for Canada (probably better than our UL certs in US for gas line). It is better than a pipe and connector that sticks straight out of the wall, possibly getting bonked by something. It is functional and gives the connection a nice clean look on the side of my house.

Replaced and old gas outlet with this. The older one was exposed. This was easy to install and looks great with the cover closed.

This is the only company that makes a 3/4 " quick connect housing for natural gas. I needed the 3/4" because 4 burner Weber grills have a 3/4 in gas line not a 3/8" or 1/2". It is a bit expensive for about $20 in brass fitting but I guess the cost is in the Stainless housing? In my opinion it's well worth it for the clean look and finish after all spending $2000 on a grill what Al's. another $140 bucks right? It has a 1/2" inlet before the shut off valve I ran 1" gas pipe then used a 1" to 1/2" reducer at the end. My 4 Burner Weber works perfect with this set up. I can also now plug my natural gas converted Generac generator into this connection also.

Well built - a bit over priced in my opinion, but I wanted something more substantial than plastic. The edges on the sides of the cover are extremely sharp, I had to use a file to stop from cutting my hands during the install and normal usage. For the price, this is something that should be done at the factory.

Very happy with the purchase. Unit is solid and works perfectly. This is my second Burnaby outlet box. My other on is a 1/2 inch dual outlet. Holds up to weather nicely, as well.

If you know anything about putting together gas lines, you can easily piece this thing together for about 1/10 of the cost on here (maybe even less). However, it is a quality product. The stainless steel cover is probably the only thing you can't buy from your local hardware store.

It is a slick solution to ensure that you don’t lose a kneecap around a grill.

Worked excellent for an outdoor grill, make sure you check hose size from your grill.