White LED Interior Light Kit for Toyota 4Runner 2003 2004 2005 2006 2007 2008 2009 Super Bright 6000K Interior LED Bulbs Package + License Plate Lights and Install Tool

07 sr5 toyota 4runner (4th generation). Swapped all lights but glove box, since I have no idea how to even go about that. (has like this shield thing that's recessed in a hole. Don't know how to remove the sheild to get too the bulb it hides underneath) plus have 4 spare as I think they replace the ones the limited comes with on the steps.The difference is insane. I still have factory tint which isn't very dark to begin with. And when unlocking, the 2 dome lights light up the entire inside, door lights are super bright as well. As are the license plate lights.Didn't expect much as in store, say walmart or target. It cost about this much just for 2 or 6 bulbs. Not entire interior. Would highly recommend.I broke one dome light upon removel. As I didn't know you pressed a tab to remove it. Instead tried to pull straight down. The other lights take a little finnesse with your fingers, to remove, but it's possible. Sucks though as no way to turn them off when door is open. (especially the door ones) so those were a little hot to remove. The vanity mirror wasn't exactly easy, nor hard. But the cover remover they give you with this set, is far too large. So I used a mini flat head to do those. Broke tabs on both. Since they're not exactly easy to remove in the first place. No matter how gentle you try to be. Also polarity sensitive. So if it doesn't light up one way, simply pull out again, and turn around. All work, all are super bright.Factory was 'ok' but where I live. Gets super super dark. And even with those lights, they appeared dim. Lots of blind spots. Hence the upgrade. These, get virtually everything. Definitely worth the $20, especially when it comes with cover removal tool, instructions (in ENGLISH! That tell you exactly what bulb goes where) for the entire interior (step lights on the limiteds), and license plate/glove box. As for longevity, to early to say. But they are definitely worth the money.I like em. :)

I have had these on my 4Runner for over a year now. The kit gave me all the bulbs I needed and had a few left over as mine is an SR5 and I dont have all the interior light options. Only one bulb has given me a bit of trouble, but this was fixed by re-seating the bulb for best contact fit. The lights a very bright and look good with my tan leather interior.

I installed these in my 2004 4Runner and they work great! Kit included all interior lights and 4 for the running boards. I replaced the orginal lights and these are much brighter. Super easy to install too. Replace all four doors lights, map lights, dome lights in middle, dome light in rear, glove box light, four running board lights.... all in this one kit. Comes with 17 lights total.One thing to watch for is if the light does not work, turn it around because they have a positive and negative connector and they may be installed backwards if they do not work. Happened to me on a few of the lights, but flipped them around and works perfectly fine. I can actually see the interior of my 4Runner again... LOL.

I bought this LED kit for my 2004 4Runner to replace the orange/amber interior bulbs. It came with way more bulbs than I needed, which is great in case any of these burn out.The bulbs that the package showed were for the map lights did not fit. After trying to force the wrong bulb in and bending the contacts, I watched a video that showed a different style bulb being installed, that looked identical to the bulbs the package said were for the license plate. I tried that bulb and they worked nicely.While changing the map bulbs, I also blew a fuse (the fuse for the interior lights in a 04 4runner is under the hood, not in the dashboard). So I changed the rest of the bulbs, then replaced the fuse. You might want to pull that fuse ahead of time before changing the bulbs, then replace it afterward (if anything, to protect from shocking yourself).Otherwise, the bulbs look nice. The bright white is a great improvement. I can't wait until dark so I can see the difference.

Nice led lights.brightness is perfect

Easy install, helpful instructions and tool with one point of clarification….. The “Footwell” lights are the ones on your running boards not internal in the vehicle. Very bright white lights. Do not recommend attempting installation in 20*F weather outside.

The aluminum 194 bulbs are about 4mm to 5mm too long. Any space that has a tight height fit will not work unless you are willing to modify it. In the picture, the top is a modified bulb to fit into the map light. Below that is the stock 194 bulb, the bulb supplied for the backup license plate lights, then an unaltered 194 from the kit. The length difference is just alarming. The license plate lights are the type with resistors to trick the car into not thinking the low power of the LED is a burned out bulb. The light output from this design is low, and the heat is high. Not a great deal. The light output is not bad. The dome lights fit better than I expected and are bright.

One of the cheapest, easiest mods you can do to your 4runner. It's super bright light - great for camping trips. My friends always want to cook near my car since I can easily light up the trunk area without having to string up a ton of lights, etc.Took probably an hour to install and was a bit frustrating but that was more due to the fact that it's hard to get those plastic light pieces to snap out easily. When you are installing, be gentle when taking off the light coverings and taking out the old bulbs. Easy does it. you don't want either of those to break or else it will be much harder of a job to finish.