TrendCraftPro Straight Two Flute Router Cutter Bit, 1/4 Inch Shank, 19.1mm Cut Diameter & 19.1mm Cut Length, Tungsten Carbide Tipped, C029X1/4TC

Used this to provide a channel to hold MDF shelves. Cuts cleanly and still as sharp as when I started.

Ideal for use with the Trend hinge jigGood quality bit that lasts quite well.

fantastic bit for the price, had the smaller bit for ages and still cutting like new

Used the machine down to size some 20mm composite panels that needed a slightly shaped profile. Did the job perfectly without any issues and a good finish

Excellent

Roulting door

I needed a top-notch cutter in a table mounted application to trim accurate rebates all around the edges of the body on my home build ukulele project, ready to take the wooden binding strips that protect the edges and give a nice decorative touch. The same technique applies to binding on acoustic guitars. The bottom and side cut combined were of interest as I new this would mean there was less risk of damage.As the top is made of spruce which is very soft and tears easily, it's crucial the cutter is sharp, especially as parts of the cut will be going "against" the grain if you follow me. I've heard sad stories of people getting this far in the build only to have the instrument damaged at this step... After much trepidation and careful set up, this cutter made light work of the task in hand and cut perfect edges all the way round - using a climb cut technique to go with the rotation of the cutter on the bits where the grain was oriented in such a way as to risk tear out, and then a conventional cut against the rotation on the rest of it. Zero problems whatsoever. Just the right tool for the job, and worth every penny.

Used a few times and no problems