VADANIA 30" Soft Close Heavy Duty Drawer Slides, #VK2053, Up to 265lb Load Capacity, 3-Fold Full Extension, Ball Bearing, Side Mount, 1-Pair

Excellent product with smooth action. This is a very heavy duty guide. You must allow 3/4" on each side of your drawer instead of the normal 1/2". Quality product, highly recommended.

Strong and smooth sliding, good product

These are heavy duty slides. They also have a very smooth operation.

I purchased this to replace the drawer slides on a Husky brand tool chest. My largest drawer fell out while filled with tools and narrowly missed my feet.I searched for a heavy-duty drawer slide that was the narrow style (more weight capacity slides are also wider, I think 1/2 inch vs. 3/4 inch.). These match the original slides in total width, but the guage of the metal is much more substantial. When I compared my originals vs these side by side, the weight was dramatic.I didn't place them on a scale, but my opinion is these are at least 50% heavier than the ones I'm replacing, which I assume is due to the thicker gauge steel used in these, and perhaps do to these being slightly taller than the ones I'm replacing.My originals had hooks to fit into pre-stamped slots. I had to drill holes to mount these with a combo of rivets, bolts/nuts, and self tapping screws. The drawer is noticeably stiffer- it resists racking side-to-side compared to my previous slides. I haven't tested their capacity to failure, but I feel confident opening this drawer while standing in front it it, even if my feet are below the drawer now!

They didn't come with hardware, but easy enough to get it. I installed my drawer yesterday and it works really well. Using it in an RV storage compartment. No longer have to crawl halfway into compartment, and much more organized.

Bought these for my father in law for a walk in closet project he was doing, he is an experience wood worker and said that they don't close right and you need to pry the drawers open. Slides were damaged during shipping and overall not impressed. Don't buy, complete junk.

Used for a roll-out cabinet 27" x 75" so the slides are fully extended when the cabinet is in the fully-open position. The cabinet and contents probably 60-70 lbs and no wobbling or drooping. One trick however: the slides are marked L and R and they *are* different - the final rail of the three sections can be unlatched and removed all the way, but the L and R parts are different. The remaining part of the slides - what I'd call the "base section" - isn't marked so be SURE you know which of the base sections is L and which is R. Because my installation was "top" and "bottom" I initially didn't think I needed to pay attention ... managed to switch the pieces and it is very close to impossible to get them apart of you put the third rail back in the wrong base section. Once I had that resolved, everything else was smooth sailing.

These appeared well made at first, but one of them never worked properly, was very tight in areas. I ended up taking them out of my tool drawer design for the back of my Yota 4Runner. I used PTFE strips in the end, was disappointed that one drawer slide was not smooth. I never contacted seller about issue experienced, had time constraints on my project.

Bought these to replace my pots and pans drawer slides. These are serious slides. They're a but tight right now but I also have about 120lbs in a 30lbs drawer so I'm sure they will work their way in pretty soon. No flex at all at full extension.

The media could not be loaded.  I needed soft close drawer tracks for a custom made pull out kitchen garbage/compost cupboard. I Basically converted a 2 shelf lower kitchen cupboard into a pull out unit. The cupboard was only 11½" deep, so I had to carve out the back of the cupboards for the back end of these slides to fit into, as they are exactly 12" long. They mounted well and worked very well for my project. I'd say if the garbage and compost were full, and you weighed the bins I used with the wood frame and cupboard doors, it could be 100lbs. These slide and soft close with ease with this design and low weight requirement. I'd say the only complaint I have is self inflicted as pulling open the first 2" of cupboard requires about 40% more strength than intended as the soft close function is quite robust. If the pull out payload was heavier, it would probably help defeat the soft close and slide open a bit easier. I've re-greased the bearings and tracks, but I think they're just a bit overkill for my needs. Perhaps they will loosen up a bit after a year or two, haha.Overall, these are solid and would work great for someone needing heavy duty slides for a tool chest or other heavy application.

Sehr gut verarbeitet und funktioniert top. Danke!

Don’t slide smooth. Not easy to install.

Glissières utilisées en position plate pour la réalisation d un volet permettant la fermeture de la trémie du velux le soir...Produit solide et simple à mettre en œuvre.4 étoiles car attention au type de visseries utilisées pour la fixation car les têtes de vis ne doit pas être trop haute.