Fluke TLK290 4 Piece Flexible Socket Probe Set

After two years, I've found few circuits that couldn't be easily, quickly and securely accessed with just the components in this set. The exception was larger contacts in old equipment, which were easily addressed by adding these: Fluke AC285 SureGrip Alligator Clips.Everything in this kit is useful and very well designed; there's no filler or junk, and it alone is sufficient for almost everything I use a meter for. The silicone leads seemed unnecessary for my non-extreme environment, but their flexibility makes an amazing difference in their ability to access and stay attached to difficult connection points. And, unlike PVC leads, they are not likely to stiffen with age.CONTENTS * Two 4-ft test leads, shrouded right-angle male banana connector to stainless steel test probe; rated 1000v 10A * Two 1-meter modular test leads, shrouded right-angle male banana connector to straight shrouded male banana connector, 10A * Two female-female banana test lead coupler (enables you to use the 1-meter modular leads to extend the 4-ft leads) * Two of each of the following slide-on adapters that fit the test probe on the 4-ft leads _insulated alligator clip, 5A _IC probe (thin), 3A _insulation-piercing probe _shroud; leaves only the tip of the probe exposed * Two of each of the following attachments that fit the straight male banana plug on the 1m modular leads: _test probe _insulated alligator clip, 5A _bare spade lug _claw clip with 26mm lead, 5A _hook clip with 26mm lead, 5A * A high-quality nylon roll-up case with four translucent vinyl pockets to organize, carry, and protect the set. The top pocket, which holds the relatively-small test probe adapters for the 4-ft leads, has a Velcro closure, as does the case flap. It is compact and sized for this set, with no room for additions.

I'm an AutoTech installer for Geek Squad, so I use my DMM almost every day when I'm at work. This kit has been a boon for me.The piercing probes are easily the best thing about this kit. They let you test wires without having to hunt them down at the source and try to t-pin into them. And depending on the application they can be used to help with testing mocked up circuits. That being said, be aware they can only handle 60VDC at 5A. If you go any higher than that the needle in the probe will heat up and will melt the core, ruining the probe...ask me how I know. (I loved these probes so much I bought a second kit just to replace the probe I ruined).The wire leads are long, like really long. At around 5.3ft. They're a little too long for my liking so I use them as backup lead wires. But the rest of the accessories work with the shorter interchangeable lead wires I have been using on my DMM for a while.The alligator clips work VERY well, the teeth are very sharp and you can rest assured that when you clamp them properly to a surface, they're not going anywhere. I mostly use my meter to find horn wires, test polarities on ignition circuits and what not, and the two default tips I have on my meter are one of the piercing probes and one of the big alligator clips.And best of all it comes with it's own pouch with clear pockets. So you can easily take it on the go, or leave it unrolled in your tool box and see what's in each pocket without having to dig through it.If you work with electronics on a regular basis in the automotive industry, this kit WILL NOT let you down. It's 100% worth the extra money than some of the similar kits on Amazon. I've been very happy with this kit, I use it at some point every day I work. Just another reason to trust and love the Fluke brand.But again, just make sure you don't pump anything more than 5A through the probes or you will regret it!

great product, high quality...a bit pricey

This is a review of the Fluke TL81A Test Lead Set, Deluxe Electronic.I bought this set because it was on sale (the Amazon Prime event,) but I must say you get a lot for your money from this kit, even at the regular price.You get the following: (I won't keep repeating that you get two of each, one red and one black.)TL71, one meter-long silicone-insulated test lead with a safety-shrouded, right-angle male banana connector on one end and a stainless steel test probe on the other. 10A CAT III 1000V CAT IV 600V.Included accessories for the TL71:1 Insulated alligator clip. Slides on the TL71 but also has threads for use with test probes like the TL175. 10A CAT II 1000V CAT III 600V.2 Thin insulated probe tip extender (long!) with cap. 3A CAT II 300V.3 Slide-on insulated IC probe tip adapter. 3A CAT II 300V.TL224 silicone-insulated SureGrip test lead with a safety-shrouded, right-angle male banana connector on one end and a safety-shrouded, straight male banana connector on the other.10A CAT III 1000V CAT IV 600VIncluded attachments for the TL 224:1 Modular test probe with a shrouded female banana connector in the handle. 10A CAT II 1000V CAT III 600V.2 Modular alligator clip with shrouded female banana connector. 10A CAT II 1000V CAT III 600V.3 Modular hook-style clip test lead with shrouded female banana connector. 5A.4 Modular pinch-style clip test lead with shrouded female banana connector. 5A.5 Bare spade lug with bare female banana connector. 10A.Test lead coupler with female banana connectors on both sides.In summary, you really get two different probes:A deluxe TL71 set with needle tip extenders, IC probe tip adapters (and two alligator adapters.)And you also get a starter electronics (and electrician) SureGrip set with steel tips, spade lugs,alligator clips, and hook-style and pinch-style leads. You can (as I did) add a few moreSureGrip attachments and have a complete electronics and electrician set of probes.I must add that the included pouch is handy and a bargain, considering how expensive original Fluke storage options usually are.

Great set have really enjoyed using them so far

Ce kit rassemble tout ce dont un électronicien a besoin.Plusieurs pinces de connexions,cables et rallonges.Tout ça de superbe qualité.Merci Fluke!

Fantástico kit de cables(de silicona) con varias puntas, desprende calidad por todos los poros, se nota que es de Fluke, muy variado para todas las situaciones. Muy contento con la compra y el precio inmejorable.

Heel blij mee. En origineel

Eigentlich ist nur ein Punkt wichtig: die QualitätFür fluke Verhältnisse finde ich die Verarbeitung des Kabels (TL224) teilweise etwas unsauber, ist aber nur optisch und schenkt die Funktionalität keinesfalls einDer Rest ist absolut top, da gibt's nichts auszusetzenIch bin echt froh dass ich dieses Set gefunden habe, es ist für Fluke Verhältnisse unfassbar günstig und es beinhaltet alles was ich brauche