EAG Rear Bumper with 2 inch Hitch Receiver Classic Fit for 87-06 Wrangler TJ YJ

Product was well packaged. No chips dents or dings- perfect.Came with D rings that have removable rubber covers- perfectAll hardware included. perfect.Contrary to most install videos on a popular online video platform, the latest design (the one I received) has the brackets already welded onto the bumper. Furthermore, all bolts are the correct length. I went out and ordered longer bolts in preparation. I used them because they were better but were not needed.In short, all hardware shipped with bumper were correct for my application 2002 Jeep TJ.Having the brackets already on the bumper made it easy to create a template and drill out 4 holes that are recommended in addition to the factory holes (that do line up perfect).The driver side inboard bolts are difficult due to gas tank location but they can be installed and torqued with patience and without dropping or loosening anything (including the tank!)Pro tip- make sure you have 13mm box, open ended, and sockets (deep and shallow) and a 3/8 drive knuckle and extensions are helpful. Also, grab a small spring from HW store to allow you to pull the bolt up and thru the hole (see image).Bumper looks great I think and will be useful to pull my small trailer when needed. It appears plenty strong despite it not having a stamped tow rating.

This bumper looks great and easy to install , packaged fantastic ,great buy I love it!

I bought this to modify and install on a 2003 toyota tundra.This thing is heavy duty, quality welds, finish and easy to install.Would recommend this l bumper for anyone owning a Jeep.

This bumper is the best thing I’ve bought for my jeep. 93 wranglers don’t come with a hitch and if your looking to pull a small trailer with you YJ this bumper is definitely the one to get. It was really easy to install only a couple of hours and we had it on and my Jeep is super rusty so that’s saying something. It looks great and it’s safe for pulling trailers really love it!

Over all a really nice replacement or upgrade to the factory bumper. People need to realize this is a bumper for dressing up your Jeep, if your looking for a heavy duty off road bumper then your going to have to spend the extra money. For the price I'm very happy how it looks, performs and it was super simple to install by myself. I would buy it again in a second if needed.

Installed on my wife's jeep this weekend.. took about 3 hours. instructions covered removing the old bumper, etc. but got a little weird when I got to the part about actually mounting the bumper... they just stop there, with no help on how to mount it... I found it easier to remove the mounting brackets from the bumper first (held on by 2 bolts each) and bolt it to the vehicle (loosely) with 2 bolts each, then lift up the bumper and slide it on and then carefully attach the 18mm bolts that hold the brackets on.. I didn't do all 4 bolts on each bracket, I just attached 2 bolts to each bracket (I'm never going to tow with this and I figure the bumper is held on by 5 bolts total on each side, should be fine), and then attach the 4 bolts that go into the brackets from the top after aligning the bumper left to right so the holes are aligned (rubber mallet).. There were instructions for removing the spare tire mount and disconnecting power to the rear brake light above the tire, but didn't say why, so I just skipped it.. I thought it had something to do with tire clearance but I tested the clearance and it was fine. Bigger tires might have an issue... but all they are doing in the instructions is removing the tire mount completely, nothing about relocating it... kinda strange. I guess they are leaving you to your own ingenuity there. Overall the bumper looks good and seems tough, I may have to get the front one to match. The included D-ring pins don't have any kind of safety to prevent them from vibrating out, so I cranked them on there really tight with a screwdriver through the pin hole and intend to look up how you make sure these things don't unscrew themselves over time.

I finally got my bumper up to Colorado this weekend actually opened it up for the first time after receiving it about 2 weeks ago. I bought this bumper because of the reviews and people were saying that they liked it and that it was easy to install without any problems. I laid everything out at 6:30 a.m. I started installing it at 7 a.m. and was finished at 8 a.m. my wife was supposed to help me and she came out to the garage at 8 a.m. and said I'm ready to help you and I told her I was done and she just said are you kidding me it was that easy really happy with the bumper it's a huge upgrade from the factory bumper simple and very affordable and looks great . Here's a little tip if you want to install this by yourself I use the floor jack inlaid the bumper on a t-shirt on the center part of the floor jack and hoisted it right up into position and was able to install the bumper by myself . The only thing I would recommend is putting the eyelets on the bumper for safety chains that's it Marty in Albuquerque

Easy install. Took 5 minutes to put on. We’ll built for the price have no complaints