Hiree Guitar Pedal Power Supply 7 DC Output for 9V Effect Pedal Board with 2 AC Outlets for Charging Speaker, Musical Instruments

These power supplies are great, have no noise issues for me and frankly I can't imagine spending more on one of these devices for my use case. Professional studio use, no live use. After watching dozens of reviews basically stating that anybody with more than 3 pedals or professional needs could not possibly spend less than US$150 on a power supply I decided to try this one out just out of curiosity, expecting it to be just noisy and unreliable, what's to be expected at this price point. I was proven completely wrong, this power supply is great. My first pedal chain to try it on was a Fender Fuzz, Boss DD-8 and RV-6 split direct out and into a Marshall Valvestate, all connected to power bricks before. After plugging everybody into this Hiree there was no unwanted noise from the Fuzz (there was some before with the previous power brick) and enough power for the rest to just work perfectly. Now the chain has grown with an Old Blood Noise Fault V2 overdrive/distortion, a Keeley Supermod Workstation, Fender Chorus, and a Chase Bliss MOOD (That's why I bought the second one). Still no unwanted noise, all I care for. And enough space for more pedals less than 100ma. I make music for TV and independent films in south america (hence the budget concern) and for clients abroad so the gear is getting used professionally in studio every single day. Both power supplies are connected to a power regulator and peak suppressor (nothing special). Pros: It's great, works, it's affordable. It has a couple of very useful plugs on the top to daisy chain and it's small. Cons: It's encased in plastic, it doesn't concern me since they live under my desk, but for life on the road it might be flimsy. Anybody on a budget should try these out with their rig, they might surprise you. No need to go straight to Strymon Zuma or Voodoo Power for home or studio use just to have "YouTube's greatest" and most expensive.

For $18 this is a pretty amazing little product does the job powers of the seven independent devices and you can use a multi power device on some of your lower amperage requirement pedals like your gain, boost, and drive pedals. Those all take a very small amount of power as long as they’re analog, so you can get a splitter for one of the outlets and use the rest with independent power. The main reason I wanted this is because I already have a $200 1-spot 12 outlet supply for my main board. I have too many pedals and wanted to make a 2nd board, but I suspected I could get away with something like this, and I was right. It’s quiet and it gets the job done. One-spot $20 switching plugs work well but have a high-frequency whine/hiss, and that drives me nuts. This doesn’t have any whine and it will pedal your entire (smaller) board with ease. If I were building someone a board that had a smaller number of analog pedals (and maybe one digital pedal since it has one 300 mA out) I would go with this. No need to spend hundreds of dollars on pedal power.

Small lightweight unit that does what it says, but has had more issues than most of the equipment in my setup. For one, the LED is extraordinarily bright and always on as long as it is plugged in, and I immediately covered it with electrical tape. Also, my pedal board has had started making more background noise with this device. I don't know what the exact cause is, but I'd prefer if I didn't have to investigate the cause. I might update my review later.

Does what it says. Gives a clean signal for pedal power supplies. I even bought a second one so I’m never without the power to my pedals at that price.

Gets the job done, nice and sleek!! I use a compressor, analog delay, and a distortion and no problems

Purchased twice now 2nd one, I have to send back because of transformer noise Noise induced into signal chain and no matter location, created a lot of signal interference I ended up ordering a non-daisy chain style power supply and the noise went completely away. I have a mix of digital and analog pedals This power supply was not compatible with three of the pedals because of the shared ground pin Isolated type power supply was the fix So, try it is my suggestion If it is clean on your rig, then good For my rig, it wasn't compatible and I have to send it back If the transformer wasn't in the module and if isolated outs, would be a winner I believe But, price, you get what ya pay for in this case Still leaving a 5 star review because it's not a complete loss and maybe best for other rig(s)

I bought this power supply for a custom home-use pedalboard and it is PERFECT. It’s small size allowed me to mount it to a small board, and power 6 pedals with ease. I didn’t notice any extra noise from this unit, and have had no issues with power. I have this on a smart switch, so it’s not powered 24/7 which is just extra peace-of-mind for me. I mounted it by taking it apart, and screwing the top panel to the underside of my pedalboard, and then reassembling the Supply from the bottom. I was even able to protrude the housing off the back of the board to maintain access to the 110v outlets. IF YOU DO THIS; I’m sure you void any sort of warranty, also, be very careful that the screws you install are nowhere near any of the capacitors on the circuit board, or you could risk an electrical short. However, there are a few locations near the edges of the housing that are clear of any obstructions. A Note: the 110v outlets on top are low-wattage only, I would never try to power much more than a USB-type charger from them, but, they are perfect for having an extra phone charger spot, or charging a Spark Mini, etc. Overall, if you’re looking for a simple light-duty power supply that gives a much cleaner setup than a daisy-chain, this is it.

Alright, pros: Value, for what it is, it does what it's supposed to. Granted I only have 4 pedals at the moment, so I'm not too sure if it works with all the power ports out yet. I'll update it if I see issues there. Cons: Even tho it does what it's supposed to, it's not isolated. For people that don't know what that is, an isolated power supply has a dedicated ground and isolated powers to the outputs to reduce "noise". If you are running a high gain setup like mine, you will find yourself constantly fighting feedback. The biggest issue I had was the power cord. I can't say it's the units fault 100%, but it wasn't helping itself. Plugging the power in while mounted in the pedal board, I couldn't get it in all the way and first time use I lost full power mid practice. I had to fiddle and push it in quite hard. It almost felt like it was the wrong type of connection and I was forcing it in. Granted with it in now, it doesn't wanna come out, so I'll let you decide if that's a pro of con...

Excellent

I'm playing around with building a small pedalboard for playing live and I'm not sure if I need a higher end supply just yet and this power supply was cheap enough that it was worth trying. I've had zero issues at home or on stage when it comes to noise. I don't know if it's true isolation or not, I just know it is quiet for me. Build quality is cheap, but I'm not holding that against it because of how inexpensive it is and it just works. Just make sure you know what you are powering before buying this as there are six 100mah outlets and only one 300mah. Update: I replaced the SD-1 on my board with a Fender MTG Tube Tremolo which has been reported by some to be a noisy pedal and this was also my experience while using this power supply. I then upgraded to a Voodoo Lab X4 and it drastically reduced the noise. I still believe this is a great power supply for the money. However, if you have a pedal that is known to produce excessive noise, look elsewhere.

Good deal, includes all connecting cables.

Me parece que cumple con lo que promete aunque le faltó un interruptor de corriente ya que al conectarlo está siempre encendido y para apagarlo se debe desconectar, me parece compacto y discreto, Perfecto para una Pedalboard pequeña aunque expansible ya que si lo quieres para una más grande le puedes anexar en serie otra igual o de 10 canales de salida. Como detalle sería bueno que estuviera señalado o grabado que es punta negativa ya que solo lo dice la caja de embalaje. Para pedales carrito boss y una multipedaleea chica boss todo ok

***This is not an islolated output PSU*** There's definitely some noise as I've tested my 2 CIOKS PSUs with the same setup and there's a noticeable difference. However the price is also noticeably different bewtween a HIREE and a CIOKS product, you get what you pay for. Very low profile, compact size and made of super lightweight plastic. There are two plugs built-in that will come in handy for charging a phone for example. Comes with all the necessary wires and a power cable. When powered, there's a blue LED to indicate it's on. This will not power more modern Digital pedals such as Strymon, UA, etc. but for old school basic 9 volt pedals, no problem. I really like it and hard to beat the value.