Arofa Kitchen Faucet with Pull Down Sprayer, Brushed Nickel Kitchen Sink Faucet Single Handle Stainless Steel for 1 or 3 Hole Farmhouse Laundry Utility Rv Bar Sinks

I love the Arofa faucet with pull down sprayer. It was extremely easy to install. Love the pull down sprayer to reach every corner of my sink. My water pressure is better now than with my regular faucet. Easy to clean. Just dry it down with my dish towel. Great product for the money. Looks nice in my kitchen.

I usually buy name brand on high use faucets, but our kitchen sink Moen unit's insides literally rusted and stained the stainless steel sink (luckily, under the hole cover plate) - so I don't see the sense in paying $150-$200 for Moen or Koehler.For $45, this Arofa high arc faucet was a seamless replacement, and - in black - it looks really nice against the stainless steel sink.I very much like that the water supply lines are standard stainless steel braided, 3/8" fittings, so I didn't have to get braided lines at the box store, and there are no add'l joints to leak between the supply and the faucet (this is probably standard today, but the Moen it replaced required separate supply lines). One oddity, not a problem, but the 3/8" fittings tighten with a 17mm wrench, most 3/8" fittings tighten with a 16mm.I also much prefer the drop-down sprayer style to the Pull-out-of-post it replaced. The pull OUT style angles *DOWN* into the body of the faucet post, allowing water overspray to trickle into the post. The Moen was replaced because it would barely rotate anymore - it's inner works were rusted completely away, nothing left but a handful of red grit. The pull DOWN sprayer style pulls out of the end of the arc, any overspray would have to travel *UP* and over the arc to get into the faucet body. Much better design.I like that the sprayer hose is covered in a braided stainless steel covered with some kevlar-ish stuff. It slides easily. The moen's uncovered braided steel abraded and unravelled.Installation was trivially easy once the old faucet and it's bits were out. Feed the lines and the threaded section through the 3-hole cover plate; from below slip the large ABS/brass threaded ring over the lines, and hand tighten onto the faucet threads. I'd prefer to wrench tight, but the large ring is clearly designed to prevent over tightening. Attach the braided, color-coded supply lines to the existing 3/8" supply fittings. Clip the sprayer weight to the marked position on the sprayer cable. Turn on the water supply, and you're done.I like the look of the 3-hole cover plate, which has a thick waterproof pad, but I don't like that it is held only by the faucet body & hand-tightened ring. The cover plate it replaced had threaded posts sticking thru the unused holes, which tightened securely to the underside of the sink. Without these, it's too easy to move the cover plate. In the end, I applied plumbing cement to the underside of the plate's soft pad and tightened that securing ring as hand tight as I could get it :-) It can move, still, but it's solid.ONE NOTE... if you existing water supply pipes don't have 3/8" compression fittings... as many older houses don't... *and* you have the option of replacing the supply valve... I'd really suggest replacing the existing multi-turn valve with a 1/4 turn 3/8" comp outlet fitting, directly to the supply pipe (in our case, a 1/2" copper pipe, so a 1/2" compression inlet fitting). The multi-turn valves are horrible sources of leakage. The EASY way is fine - a 3/8" adapter to whatever your supply requires, but is an add'l source for leakage. If your wall pipe is 1/2" copper or 3/4" MIP (threaded pipe), replacing the valve is not beyond most homeownersSO... for a quarter of the price of the faucet it replaced, I'm really happy with this faucet. It looks good, is not leaking, and was easy to install.Time will tell whether it holds up, but it looks and feels solid. All the fittings and supply lines are good quality, all the important parts are 304 steel, all the moving parts move easily, but feel solid.We paid full AMZN price for this item - no compensation for review.

Easy installationLooks greatWorks greatFor the price I am impressedHappy wifeHappy life

The metal is a bit thin, and the water pressure is a bit lower than what I like, but overall it is a good faucet and it works well. Easy to install. Great value for the money.Update: after using it a few days, the pressure is fine. I just had to get used to it. I even reduce the pressure for hand washing to lower the flow. It has a button to stop the water flow entirely also, if you like that. Overall nice.

I purchased the item from Amazon. It was very easy to install. It came with directions that were easy to follow. The connectors under the sink are very good quality. The faucet is very stable. After several months of use, the sprayer portion of the faucet started acting up and would not return to normal after using the sprayer. I contacted the company for warranty and was assisted by Aimee. A few simple emails including one I sent with a video of how the sprayer was working incorrectly and Aimee sent me a new sprayer. Detaching the sprayer portion from the faucet was very easy. I replaced the old sprayer part with the new one and it works great and looks great! Sturdy faucet and great water flow.

This is just such a gorgeous piece of home appliance. It comes wonderfully packaged, making this a wonderful gift to anyone who is moving into a new home or just for anyone who wants to redecorate and upgrade their sinks. It is a bit pricier than some similar faucets, but it is well worth the investment in terms of its functionality and style.The black coating extends to the exterior of all of this faucet. The hoses are already attached, saving you so much time and frustration you are usually likely to encounter when installing a faucet with little experience. It's essentially just a "Drag and drop" setup, taking less then 20 minutes to get everything hooked up and in working order.*UPDATE* 4/15/20 So I finally got around to installing this (set it up initially to see how easily it could be done) and now after only 2, barely even 3 months, the black coating is wearing away. I thought it was a stain at first, the silver showing, wiped at it, only to reveal that the black was actually stripping away now. Such a shame as this damage is in the very front of the sink and takes away its overall look. Worse part is, this will just continue to grow as time goes on as there is no way to seal it.*UPDATE* 6/12/20 The company has reached out to me and sent a replacement for this faucet (included in the 5 year warranty). It arrived in great condition and is working out well so far. Only time will tell how well this upgraded version will work out but I am hopeful for now. Great customer service, really.

Absolutely stunning. Very well worth the price and very reasonable. Look and functions great! It is replacing a $189 faucet.

Love it, so much easier to do dishes. Love the style, and love the color. Great item.