BOSS 5ft / 1.5m Angled MIDI to 3.5mm Straight TRS Cable (BMIDI-5-35)

I needed this cable to connect my M-VAVE Chocolate foot controller to my Behringer UMC404HD audio interface's MIDI IN port. I didn't want to use bluetooth, and this cable was the perfect solution, once I placed a STEREO TRS adapter onto the cable. Initially, the adapter to 1/4" I was using was a mono adapter, and the cable wasn't working. I dug through my adapter box and found a TRS adapter and everything started working the way it should have with the foot controller sending MIDI to my interface and then into my DAW. Couldn't be happier with this cable and it works well.

This is sturdy, flexible, and works as it should.

My best midi-cord. I used it for my O-Coast to go into my midi-thru box and it sounds like perfection to me. Boss is solid. If you need a midi-aux cord to work, spend a little more and you know you wont have to worry about quality.

These are expensive but they are well built and will last forever.

I bought this cable because it was recommended as a cable that will work with the Roland SP 404 mk2. I used it to hook up my Akai MPK Mini PLUS and/or Roland GAIA to the 404 mk2. The cable is a nice length at 5 feet and it feels like a quality product, meaning, not cheap. I'm sure it will work with other devices that have the 3.5mm midi ports on them, but I can confirm it works with the SP 404 mk2. I give it 5 stars for doing its job and doing it well!

Works as it should. This item is pricey but unable to find a substitute due to wiring type. Wish they had a longer one but made this work on my Boss RC-500.

This is a high quality TRS type A cable. There is a sea of lesser quality cables with mixed reviews. I personally found it worthwhile to just order one that I could trust to work. It's a little confusing that the product code is BMIDI, also the diagram on the back of the packaging depicts the male plug whereas most online diagrams show the socket so the pins are reversed. This is indeed a type A cable though.. tested with a Dirtywave M8.

I did some OHM testing with a multimeter and here’s what I found, readings: DIN Pin 5 is connected to the 3.5 mm TRS ring. DIN Pin 4 is connected to the 3.5 mm TRS tip. DIN Pin 2 is connected to the 3.5 mm TRS sleeve (ground). I threw away the packaging and can’t return it. I’ll try a 3.5mm TRS A/B adapter to see if my MIDI controller will accept receiving the signal on these DIN pins. Otherwise this cord is false advertised! My MIDI out device is Type A and I needed an industry standard Type A cord, this isn’t it. Waste of money and more importantly waste of my time.

Excelente calidad y compatibilidad con pedales Boss , este compré para sincronizar el looper con el pedal de ritmos . Rc5 y beatbuddy se necesita un segundo cable adaptador pero funciona perfecto

Good cuality

Worked live without any issues what so ever