Ulincos® Momentary Push Button Switch U19D1 1NO SPST Black Metal Shell with Red LED Ring Suitable for 19mm 3/4" Mounting Hole Pack with a Resistor (Red)

I'm using this switch as a remote mute button for a Uniden R7 radar detector that I've spliced into the Uniden hardwire kit. Wiring it up was super simple and the terminals are small but easy to solder to. The Uniden hardwire kit is 3.3v so I skipped using the resistor that's included for 12v loads. It fit perfectly in this enclosure https://smile.amazon.com/gp/product/B07SRZCYTN/. Overall very happy with how everything came together.

The switch comes with a resister to use in 12v system. Installed resister and other wiring as specified in instructions provided the switch works as it should however the light which is supposed to be on all the time as the schematic indicated, never worked. I bought this switch as part of a custom console build for my car and wanted the light as part of the design. I cannot recommend this product as it was faulty from the get go. Will not buy again.

Used this to create a new dome light in a an old Pontiac Fiero. These look amazing! This upgrade make my little project look absolutely cool. Also they are really functional because I have it light up red when the car is running so you can see them even when its dark. These are great. Very happy with these.

I used 2 of these buttons (in different colors) for my garage door opener. I have an older home and the garage door openers didn't have illuminated buttons. I used these buttons and a 12vdc plug in power supply and now I can see the buttons!!They are perfect and my wife can now open the correct door the first try.

Basic push button. I suggest you know how to solder as there is a required capacitor that makes the led light function. I bought this by mistake and change it to the click button as I paired this with a set of LED pod for my car. Button is nicely made but I don’t think it serves my purpose. It is mostly plastic but it is a nice button if you just need it for a momentary power on (like a computer or something like that)

This button worked perfectly as a toggle for my front gate. I (temporarily) wired it to the motor's 24V source, with the positive connected to a 2.2k resistor, and the left/right terminals wired to the motor's button inputs. I'll be getting two stainless ones that should look pretty slick on a plain white wall plate, and this one will be saved for some future project down the line.While it does look great, mine did come with some scuff marks that I wasn't able to get off, but unless you're looking at it closely, you would never notice.

I wanted a nice looking button for my garage door opener. I do consider it to be my man cave, I really didn't want to see wires. It took some time to install but it was well worth it. I had one button before but it was a little smaller and very hard to push for me. Was very happy that I found a larger one that was black with a white light. The voltage on the garage door is a little higher than 12 volts so I used the supplied resistor for the led light.

I wired this for LED always ON with the resistor because it was to be used on a vehicle, the resistor decreased the voltage to my device as well , therefor my device did not work as intended.. when I tried to wire it for the LED to only come on with the button was depressed, my device was consistently receiving power and so was the LED and things were even worst... bottom line do not buy if you need to use the resistor...

This is a really nice illuminated push button (momenary). I'm happy with it.Of note:* As others have mentioned, the wiring can be a little tricky depending on the effect you want. Just play around with it, that's the fun part. It comes with a wiring diagram.* The mounting depth is surprisingly deep, take that into account. It didn't sit flush with the first case I mounted it in. Fortunately I had a slightly larger one available.* Button is rugged and has a high quality, robust feel to it and a great tactile response.* People asked about Voltage ratings. Vendor claims 240v. I ran a 120v circuit with it with absolutely no issues or concerns. Currently it is handling a 12v circuit and I feel it is suitably overrated for that purpose.Inexpensive, fast arrival, and good quality. I plan on buying a couple more once the blue version becomes available again.

Fantastic switch. When it arrived I could tell the solid metal feel meant quality. What was even better is the customer service of the seller. When I was asked my opinion I mentioned that I accidentally burned out the LED in the switch because I did not put a transistor in my circuit (Completely my fault). Without delay I had a brand new switch in my mailbox.THANK YOU SO MUCH! <3This was such a great show of generosity to send me a new switch. I will order again from you 10/10.

I have lost my instructions that came with the switch. Would it be possible to send me a photo of instructions to [email protected] really appreciate the help. Thanks

when i ordered the switch's they arrived quickly nice metal high quality switch my one switch had a faulty led Ulincos Was Very apologetic and right away sent me a replacement i will defiantly order from them in the future

Its not steady on off switch it stays on only until u keep pressing button. And led light never work though .. even istalled from professional person.