Xprite White 8 PCS Truck Pickup Bed Light Kit, 24 Led Cargo Rock Lighting

i used these for the inside of my truck even though it says they are for the bed they work for the interior as well and they look great worth the money 100% almost a year later and they still work fine. very bright cable is super long so i had to zip tie it together but its good if you need a long cable i didn't need so much but i made it work. i wish i could change the color but blue works for me.

So I bought this product to use as a underbody light kit. I found the fact that it is a pre-wired kit and the overall length to be perfect for lighting under my Ram 1500. The connectors to string the lights to each other don't appear to be weather tight so I did opt to cutting them off and using a heat shrink butt connector to give the peace of mind that no water will cause the lights from not performing as I wanted. The lead wire is a very generous length and made it easy to run it to power and ground. I tapped into an existing stock light so when I turn my cargo light on or when I unlock my truck these lights turn on and light up the ground around my truck. The light output is pretty good, there are brighter products but if this was used for its intended purpose it would be plenty bright enough. The light color is pretty white but does give off a very slight purple hue so it's not a pure white output. Overall, I am very pleased with the purchase and product.

Looks and works well. The mounting screws make sure of a solid fit. The switch is a nice addition.

Worked great

Installed these on a 2016 Ram 1500, equipped with the OEM LED light kit and after the application of an aftermarket spray in liner. I basically tapped these into the OEM lights on the rear of the bed, than ran each string up the side, three to a side. I have a Bakflip MX4 along with the Bakbox 2, and ran the fourth light on each string up to the mounting bracket on each side of the toolbox, so the light shines in there as well. I drilled out the hole on the Xprite LED module a little bit so as to fit a bolt in there to be secured with a nut and a washer...I wanted to be able to remove the light in the event I was dismounting the toolbox. All wires were bundled so as to take up the slack, and secured with zip ties. Rig is very bright, and comes on with the OEM LED lights. The Xprite white lights are not an exact match to the OEM LEDs, but it's not enough to bug me. The Xprite lights appear to stick to the spray in liner just fine even though it is textured. Very nice. I'll be buying more of these.

I ordered 2-sets...One set for rock lights and one set for the bed. I also ordered an LED installation wiring kit to make it easier. Keep in mind, the distance between each light pod is 2 feet, which will fit fine in the bed of the truck without cutting wires...Where as, for the underneath rock lights, I spliced every pod with an extension power/ground wire. The double sticky tape provided on each pod is in good quality and sticks on the first application. (hard to get off!) I also followed up with the small screw that's included to secure the pod to the truck. Can't beat the price for the output these little things put out! Highly recommended!

I wanted to add lighting to my Ford Maverick's truck bed. I settles with these. They have adhesive on the back but it does not stick at all to a sprayed-on bed liner. Each light fixture has one small pre-drilled hole for attaching with a screw. I wish they had two pre-drilled holes. I was not going to start drilling a second hole as I did not know how the two wires inside the fixtures were ran. Comes with plenty of wiring. With my short 4'6" truck bed, I cut and spliced the wiring between each fixture to place the lights down each side of the truck bed. I did not want to go down a side and around the front corner like many do. I used the X001EPMVXZ Low Voltage Electric Connect 20/22 AWG splices by Brightfour from Amazon. https://www.amazon.com/dp/B0C4L6B1LM/ref=syn_sd_onsite_desktop_0?ie=UTF8&pf_rd_p=4500617b-0cc7-45a9-8bde-f455bfff54d3&pf_rd_r=XMSS8CQQ3FN85X21F7TN&pd_rd_wg=zD03B&pd_rd_w=DZZff&pd_rd_r=f50a3b8d-3c1a-40dc-9970-e15c3f7e5bcc&aref=dClSaIUfNj&th=1 Used a putty to stick the connectors to underside of the bed rail to keep them from dangling. Together, they do a good job of lighting up the bed at night.

I will use these under the rail of the bed of my pickup to provide extra light as needed. I bought another set to use inside the cab to light up the area where I carry my tools and parts. They are super easy to install but you do need to pay attention to the polarity or they won't come on. I didn't pay attention and they did not come on but it did not hurt them. The 3M adhesive seems to hold well. I am going to put the wires in a loom or tube of some kind to keep them protected. Haven't had them long so don't know about longevity but they are very bight and I have bought two more sets already. Highly recommend

Nice and bright for a truck bed light but do not overtighten if you’re screwing them down. The foam backing allows it to bend if you do and it breaks the connection so all the lights down the line won’t work either. Also the current draw is very small so I wired directly into the 2 factory ram bed lights, so they come on with them and the factory switch. Time will tell about durability though.

As described. Not super bright but just right. Easy enough to install except that the wiring diagram was wrong. Comes with 4 lights per side. Didn't measure but must be at least 16 feet (8 feet of lights and 8 foot pigtail to hook up). Only used 3 lights per side because my box is only 5.5 feet long. I like that I could unplug the last strand of lights and use them somewhere else. Only used the tape on the back of lights. (It did come with little screws too). Time will tell if they hold. Other than the instructions mentioned above, very happy with purchase.

I used 2 of these for footwell lighting in my 2020 Sierra. Love them.

was not expecting top quality but this should not be sent to customers.

Excellent quality lights. For the price you definitely can’t go wrong I run xprite on all my vehicles and have never had any issues have yet to install but tested them an are really bright