AMVR Touch Controllers Storage and Charging Station for Valve Index, VR Headset Wall Mount Stand, 2 Functions Both Hold Valve Index Headset and Type-C Charge Handle Controller

Does cost a little more than necessary given what it is, and the blue light is a bit annoying, but I leave it turned off most of the time.Installation of the contact pads is simple, it's just a USB-C dongle that plugs directly into the knuckle controller and connects with the pogo pins on the base.Getting the knuckle controller seated correctly can sometimes be a little fiddly but it's still way more convenient than plugging and unplugging a cable every time you need to charge.Looks great on the desk and keeps the controllers safe and out of the way.Solid purchase.

Designing a stand for these particular hand controllers must be challenging to say the least, and with this stand a valiant effort has been made. It looks fine, but one couldn't really call it a triumph in functionality.But it does the job, and does it well, even managing to look sexy while doing it, and I really like it.From the box they come with a single USB cable fitted, something that isn't mentioned in the advertising blurb, and something I'm grateful for, it would be a nightmare trying to manage with the two cables that come with the controllers, one of which I've lost anyway. It also comes with two separate USB "fittings" which have to be fitted, one to each controller. They permanently sit on the controllers so don't forget they are there! Remarkably they stay in place quite firmly, although your're in trouble if you lose one! These ensure connectivity when the controllers are slotted back into the stand for charging and storage.And this is where its awkward. Logically the controllers just slip into place and lock into their respective charging plugs, but they can be frustratingly awkward and annoying to get to sit just right. Similarly moving the whole assembly with controllers in position should be easy-peasy, but inevitably they fall all over the place.It looks good especially with the little flashing green light as its charging - well actually when its fully charged as well which I thought a shame. Why couldn't they have it stop flashing when fully charged? But the controller lights indicate when they are charged so no matter.Really expensive for what it is, so a luxury item really, but one that looks good and does its job well, despite minor grievances.

Works really well. I tend to plug it into the port on my PC that's always powered even when my PC is shutdown, which makes charging over night really easy.I haven't wall mounted it since I'm not allowed to drill holes in the place I rent, so I can't speak about that, but it looks like it'll hold up okay.The controllers slide in smoothly with a nice snug fit and you get a reassuring "clonck" once the bottoms slide into the charging port, so that's nice. I do sometimes need to riggle the controller or rub the contact terminals for it to make contact and charge though. It's probably just a bit of dirt on it stopping the contract, but its generally not an issue.Overall, really recommend getting this, it's a great nice to have to make your VR experience a bit nicer. Saves the hassle of connecting cables after every session.

When 2 are charging it makes a high pitch noise. It also has a blue light when turned on that's annoying if you want a dark room

Bought these for my son for his bday in August waited to write review it is great he loves it very easie to set up and does exactly what it says on the box

After around a year, the right charger has died which is disappointing. Otherwise good product.

The product works well and the controllers are stable, did not know I needed one until I got it.Just keep in mind if you use any ProTubeVR products, the cup for the index controller will cause you not to be able to slot the controllers into this base due to the clear plastic holder that this base comes with.However, there are solutions for it:1. Do not slot the clear plastic all the way in, the controllers will still be stable, not fall off and looks good2. Cutting a bit of the clear plastic off to leave room for the controllers to slot in properly3. Remove the index protubevr cup before slotting it in.

The Index controllers are not the easiest thing to design something to hold and charge them but this works well, the charging light is slightly annoying but not in a way that would make me regret my purchase.

Einfach zum aufbauen. Sie halten auch was Sie versprechen. Beim Laden gibt es allerdings einen Pfeifton, der etwas nervt, aber trotzdem einfaches Laden ohne jedes Mal den Stecker reinfummeln zu müssen.ich würde Sie trotzalledem wieder kaufen.

I'd say if I could really review this it would be 4.5 out of 5. I really like that USB C nubs plug into the controller, so all you have to do is drop the controllers in the stand and they'll get to charging without having to try and plug anything in. Very convenient, easy and a fairly elegant solution.It also looks good, I like the plastic insert in the middle that lights up in green, and it gives overall an attractive shape when the controllers are in or out. Not an eyesore at all and looks nice which is definitely a bonus. I was planning on 3d printing a holder, but this just looked good and for the price, I decided to give it a shot. I'm glad I did, overall I'm very satisfied with it.I do find a couple of mild issues though. From most severe to least:1) There is an audible buzz when charging and the controllers are plugged in. I found it to be kind of annoying so I turn it off with the power button on the side. Definitely not a dealbreaker, but it's definitely audible and not pleasant to listen to.2) It is pretty narrow so it has a little bit of a tendency to tip if you're not careful. It's not to the point where it's a problem, but I'd have liked it to be a little thicker.3) The USB cable is quite short. Maybe a couple feet. And it's built in, so the only way you can have a longer cable is to get a USB extension cable. Not a huge issue, but something that still annoyed me a little bit. I also find it pretty cheap to not include an actual charger, but with how many most people have laying around, not a big deal.Overall these issues for me bring this product from being "perfect" to "very good". Not big issues for me, but these are factors to consider that may be a bigger deal for someone else.These are all first impressions, if anything changes I'll make sure to edit the review.

The media could not be loaded.  Bij het plaatsen van de controllers moet ik goed moeite doen om ervoor te zorgen dat ze beginnen met opladen.Door het corigeren van de een, verliest de andere weer verbinding.Blauwe leds zijn behoorlijk vel en niet los van het laden uit te schakelen.

RAS

Il supporto di adatta ottimamente alle forme dei controller dell'Index permettendo una facile collocazione/estrazione degli stessi.In dotazione sono presenti due adattatori che si collegano alla porta di ricarica di ogni controller e che vanno a poggiarsi, una volta posizionati sul supporto, con i pin di ricarica a contatto.Accessorio utilissimo e di estetica accattivante.Consigliato.