Redragon K552P Mechanical Gaming Keyboard TKL with 18 Backlight Modes, Hot-Swappable Red Switches, 87-Key Compact Ergonomic Design, N-Key Rollover & Software Programmable Macro - RGB, Black

I'm a software engineer and can type anywhere from 85 - 110 WPM and those who code know the challenge of hitting special characters frequently; I should never miss a ; end line now :). I use to use an apple wireless keyboard with the chiclet style keys extensively the past several years and didn't realize that was slowing down my typing. I actually purchased this keyboard for gaming at home but then bought another for work since I noticed a huge improvement in my typing speed. The reason I didn't purchase a mechanical keyboard is due to the windows vs command key. The only mechanical keyboard I've found that has the command key is a das keyboard that is > $100 which is way over budget; can get 3 of these awesome keyboards for the price of one das. I've gotten use to using the windows key as the command with my pinky rather than the left thumb on command. I use both windows and mac so the switch has been great and it took a couple days to get use to replacing the thumb for command and using pinky for it but it has also made my windows typing much better since I use my pinky for windows anyway. For those who can't give up their mac specific keyboard should look into buying one of these since you will make it work due to how awesome the keys feel. It's identical to the more expensive cherry ones. I won't feel bad if this keyboard breaks a year later since it's only $30 and the ones that have the common cherry switches cost > $50. The apple wireless keyboard is double the price of this... # Pros - Identical to cherry switch that other more expensive keyboards use such as Das. - Increased my typing speed by at least 15 WPM. - Tactile feedback you do not get with chiclet style keyboards. - Solid and quality made. It's heavy so it won't move around the desk. Has nice grippy rubber pads too. - Don't have to switch between the apple wireless keyboard and the windows keyboard since I use the same one off the KVM now. - I don't have to recharge and replace the batteries in the wireless apple keyboard since this is corded. Got so sick of replacing batteries just to have wireless when it's going to sit on the desk anyway so it was pointless. The apple keyboard would lose connection with the bluetooth too so again, it was pointless. - Compact size is better than a full size keyboard. Removing the number pad provides a better ergonomic experience which prevent strains due to widening the arms with the mouse. Research this if you don't believe me. Some ergonomic keyboards put the number pad on the left side of the keyboard. - Best bang for the buck. Amazing value so I purchased 2 of them. Perhaps all the big brands such as Das will lower their price since this one seems to own the Amazon market right now. It's 2018, people who are sane know that a mechanical keyboard shouldn't cost > $100. C'mon, the IBM Model M in the 1980's original price was around $250 but that's some dated technology! It's like paying the same price for an OLED TV for a tube tv. Who they trying to fool and that is why Redragon is here. They know the other manufacturers are price gouging. # Cons - None so far. # Neutral - My coworkers find it distracting since it's loud but they can put headphones on. A mechanical keyboard is... loud. - Noticed some sound interference with my Logitech speaker setup at home. It sounds kind of cool because the breathing effect will also output in the speaker. Breathing will make it sound like a badass intro to a sci-fi action scene (think star wars lightsaber) and the solid light will make an ongoing high pitch noise. This is probably an issue with the KVM I use to switch between mac and pc. I don't have this issue with the pc but when I switch it over to the mac the interference occurs.

Not a bad keyboard, even in 2026. As long as the noise levels isn't a dealbreaker with you, the switches sound good and the keyboard is responsive. This keyboard is known for being a reliable tank, at a good price. The stabs aren't bad, maybe it's masked by the blue switch noise. Colors are nice and bright. It's a excellent buy for 30$, but once over 40, I'd advice looking into the Aula F75, especially if you aren't into Clicky switches, as the Aula doesn't provide anything other than Linear options but those linear options are better than the linear option for the redragon k552. Keyboard is a buy it and it just works.

I had been contently using basic keyboards for years at work and home, without a second thought. Then, a few weeks ago, a colleague introduced me to the world of mechanical keyboards. At first I thought it was a little bit stupid that this was even a thing to be excited about. But immediately after talking to that person, I knew I needed to have one. This is why Prime exists - It was a purchase that couldn't wait. I always liked the feeling of those old school IBM keyboards. I'm not much of a gamer, but I do use a keyboard all day long for work - programming, writing documents, endlessly revising wording in controversial emails, etc - so why not invest in a keyboard that makes me a little happier during that time? I chose this keyboard because it had the clicky blue switches, looked solid, had nice RGB, was tenkeyless, and had an overall good reputation. I was not disappointed when I received it. It feels very satisfying to type on. The tenkeyless form factor is perfect for me - I had never used num pads, but would find it frustrating not to have dedicated arrows, function keys, and Insert / Home / etc they way they are here. With the RGB, I find myself sticking to the mode where all keys are one static color. The flashy effects are distracting to me, but might be inspiring to some folks. The typing angle is comfortable with or without the legs extended, but the keyboard slides around the table a bit without them. There was another very similar Redragon keyboard (Visnu) that I was also considering. I went with the Kumura because it has a more compact form factor. Now that I've been sucked into the mechanical keyboard world, here's what I think I would change. (Many other reviewers have already mentioned all of these things). The keyboard has a little bit too much of a "gamer" look to it, partly due to the font of the keycaps. It sounds like PBT keycaps have a nicer feel to them than the stock ABS ones anyway, so I would consider swapping to a custom set at some point. The raised Redragon logo is also a little bit too "gamer" looking too - I noticed that some other Redragon keyboards have a more subtle logo. A detachable cable, and maybe Bluetooth, would be nice too. I enjoy the clicky switches a lot, but am curious to try tactile but non-clicky switches which are apparently a little less obnoxious in an office environment. (Like many folks, I have been working from home during COVID). Maybe I would go with a white keyboard too. Overall, I think the Kumura succeeds in being a very nice entry into mechanical keyboards. It was under $40 when I purchased it. In retrospect, I would also have considered something like the Ajazz K870T, which is about $60 but has the features left on my wish list. But then again, $60 sounded like it was out of my price range at that point. UPDATE Here's an update after three years. This keyboard is still my daily driver, and I have modded it a bit. - Rubbed out the logo on the front of the keyboard with an eraser. - After about year one, I swapped out the stock keycaps for a set of Matcha PBT dye subs with ZDA profile (ASIN: B08QJGH5VT). These were about $38. - About 1.5 years later, I swapped out the clicky blue switches for Akko Jelly Blacks (ASIN: B09K7QX9QK). These are linear with a bit of resistance, and are compatible with the Outemu sockets in the board. It costed about $34 for two boxes of switches. - I lubed the switches and stabilizers with the lube from this kit (ASIN: B09YLLVGX4). - I added a slab of mass-loaded vinyl to the case to dampen some of the case noise. This also makes the keyboard much heavier, which I prefer. A 12" x 12" square of MLV costed about $10. I have enjoyed tinkering with the keyboard and trying various mods suggested on YouTube. One particular channel that inspired me is Consumer Tech Review. The look, sound, and feel has changed substantially from the stock setup. Especially with the clicky actuation gone, most of the sound comes from keys bottoming out and feel comes from the anticipation of them bottoming out from when they are pressed. The Matcha keycaps completely change the vibe from "gamery" to "retro" / "enthusiast". The RGB doesn't shine through these, but it does show up in the gaps between keys which is good enough for me. It's kind of stupid, but the sensory experience of the keyboard makes working just a little bit more pleasurable, and it's been interesting to vary the experience through the customizations. The budget TKL market seems competitive now, but I like this one because the case is solid and the PCB has been reliable. More recent keyboards include things like gaskets to improve the feel and layers of foam to improve the sound. I'm curious to see what kind of differences those things make in person, but I am also trying to avoid blowing too much money on this stuff. The main thing on my wish list would be a detachable USB cable. It appears possible to do that by soldering and making some alterations to the case, so that's an option.

I didn't buy this keyboard for gaming. I am a college student and I enjoy typing on a mechanical keyboard. I have been using this Keyboard for around a week with my MacBook Pro. Once I opened the box I was enlightened by the weight of it. Its not too heavy and it's not too light. Seems like the right amount. The build quality is great at this price point. The plastic seems strong and sturdy. I did a flex test and little to no flexing. I haven't taken it apart but it feels like they have a metal plate inside for structural support and what gives this little guy that extra needed weight. The plastic for the key caps seem a little thin to me. When typing on the keyboard you can feel the quality of the caps. Slightly thicker keys would make this product perfect for me. The switches are great! I am no expert at all but from what I have read they compare to Cherry MX Blues. These switches are very loud. I live alone so I don't have to worry about disturbing anyone. This switches are of great quality in my opinion. They feels sturdy and they do not seem cheap. The led lights are great and it makes this keyboard look sexy. Each key has its own led and they are bright enough for everyday use. I do like how you can adjust the brightness of the light or you can just turn them off. I have noticed the LEDs will not stay at your setting once you turn your computer on. You will need to adjust it every time. Overall I am happy with my purchase and would recommend this keyboard to anyone looking to save a few dollars.

My daughter uses this keyboard, we both love it, but it's indeed loud. We've tested other keyboards including Razer, Logitech, Cosair, as well as some varieties of Chery Brown and Red, but in the end still love this Cherry-Blue clone. Tried some dampening O-rings, didn't help much, so I decided to open it up and experiment (need to remove the keycaps to access the screws holding the top plate down). Here's what I found. The noises come from: - the click of the switch itself. It is what we like over the other switches, but the keycap amplifies this click quite a lot. - the bottom-out noise when the keycap hits the switch's box. The O-ring can dampen this sound a bit, but the boxy plastic base amplifies it multiple times. Coupling with an IKEA tabletop, it sounds like hitting a drum. - the sound of the switch hitting the switch's box on the way up. You can hear this sound when you hold a key down and lift your finger up quickly (like when typing fast). Again, this sound is also amplified by the keycap. The good news is, if you take the circuit board out of its boxy plastic base, all the noises are reduced to around 25-35% (my rough estimation), the only noticeable sound is the faint click of the switch itself. If you like a really quiet keyboard, you can just make a custom base/footing (a block of foam for example). You just need to cover the exposed circuit board on the underside, the top metal plate is pretty solid and won't bend. I'm pretty sure it's even quieter than the typical Dell keyboards at my office. However, my daughter prefers the keyboard with its base, so I tried to stuff the inside with foams, hoping to muffle it, and it seemed to work. But upon tightening the screws back in, it's noisy again. So, the noise is transmitted through the screw poles to the plastic base, then the base amplifies it. Stuffing might have helped a bit, but not noticeable. To decouple the keyboard from the screw poles, I cut pieces of foam to the same height as the screw poles and double-sided taped them to the base. The poles are of different heights, shorter near the space bar, and taller near the Function keys. When putting the keyboard back, the circuit board and top plate sit on the foams, I tightened the screws very lightly, basically the screws keep the top from jumping out rather than holding it down. This significantly reduces the noise. I also filled the base with thinner foam rods, to reduce the void space in case it does act like a speaker enclosure. The keycaps were still problematic, with the switch's click, the bottoming-out, and coming-back noise. Instead of using O-rings, I stuffed cotton ball in the keycaps, just little enough to muffle the sound, and acts as a thin layer of O-ring. The more cotton, the muffler the sound, but also shorten the travel distance. I didn't want it to interfere with the great feeling of the switch so I didn't use much. I was lazy and didn't stuff the function keys as they're rarely used, also to serve as a comparison. You'll have to experiment a bit to find the right amount to your liking. The cotton does block the backlight a bit, but not much (and don't look straight into the backlights after removing the keycaps, they're blinding). One last thing, whatever the small amount of noise left, transmitted to the tabletop and got amplified. So I rolled a thin foam bag into little feet and taped them to the keyboard, no noise from the tabletop at all. Overall, I'd definitely call it a success. She was ready to compromise for a quieter keyboard, but now more than happy to keep it. I used to be able to hear her "smashing" the keyboard in her room from the living room, now I can barely hear the "light" click if I really pay attention. She wanted the RGB version, so I'll buy one to trade with her, and probably will experiment with a custom base instead. See a need, fill a need!

I swear by the red dragon keyboards nicely price and very good quality that last for years of active daily gaming. You cant go wrong with this keyboard. Still in great condition years after buying. Nice feel and well weighted. Built with good material. Keyboard is made with metal not cheap plastic. Nice clicky keys and feels good to use.

I think this is a great product. The price is easily worth it. I have some preferential dislikes but I would file them under "feature requests". Well-built, I think it will pass the test of time. The keys are a good texture. Responsive. The feet that flip out on the bottom are actually amazingly well-made. Like an old IBM PS/2 mechanical, except lighter plastic. But they're not the little dinky cheap ones found on the keyboards that come with retail PCs in the box. Extra little features you might find nice: You can lock the WinKey. You can lock all the keys. And you can swap the WASD/arrow keys - but note that when you do you're pressing FN+W, and during the swap with each press of just the W key both the W and the UP keys are sent. I can't see that being a problem but interesting quirk. The keys as far as their mechanics... The click is tinnier than, say, a brand-new Cherry Blue. A bit more pronounced. And you can hear the spring vibrate, like a faint bell, when the key returns. Like a older worn mechanical - the bell sound, not the feel. The feel of the actuation is good, I think, but it feels a little lower than the Cherry, and the tactile bump of the return is stronger so that may be the reason for the bell sound. They're not really Blue clones. Not bad, just different. Maybe louder. IDK it's hard to tell (I don't have both to compare, just from memory - my usual Browns are tactile with no click, so that may be skewing my assessment?) I wouldn't fault anyone for choosing Otemu switches. Utility-wise, I'm sold on their quality at least. And note the price, and I think it's more than fair. Also - it's a trade-off, but you're not buying junk. I'm not sure how to put into words what you're trading off but it's not craftsmanship or quality. So anyway, some dislikes/wishes: I got the Red LED one. You can change brightness (and make it breathe-blink at different speeds), and you can turn it off. But, the lowest brightness setting is a bit bright. I feel like it should go lower by like 50% from the current lowest setting. The thickness of the letters, which light up, is what makes it harsh. Maybe it wouldn't be as bad if the font was thinner. But I like the font, and I would appreciate a lower brightness setting. I actually expected the light bleed from underneath the keys would be worse - but that's actually a reasonable amount. I would really like more switch options - I'm a fan of Brown ;) UPDATE: Yeah so turns out I really dislike clicky switches. I felt like a 70s reporter the night of deadline while writing this review. So i bought Otemu Browns and started swapping the switches. Much happier, no issues during replacement. The ones sold here on Amazon are $10 for 20 but it's still less than the cost of most retail mechanicals at the end of the day, or equal price in some cases. This is a fine build board and I'm so far perfectly happy with Otemu switches. I think I'm going to put some LED-dim stickers on the inside-bottom of the keycaps to fix my gripe from above. A bit of an adventure, but that's half the fun for most of us :)

(Update after 4 years - 3 Stars) I first was advising to not buy this keyboard, but I wanted to share my experience after almost 5 years. Initially I was having keys typing more than once, but I continued using the keyboard, and one day it was working well. I still use it everyday, and now it's working just fine. From time to time some keys start typing twice again, but if you use them a lot, they fix themselves and start working again. It is durable, so I love it even with the troubles xD Also cleaning is nice, because you can take the keys out, and the letters never fade because they are not printed, that's awesome! ---- (Initial review - 1 Star) I have been using this keyboard for almost seven months and you should read this before thinking about buying it. When you buy a keyboard the most important thing you need it to do is that when you press a key your computer knows you pressed it and do something about it. And you need it to work precisely, you press A and immediately you need it to take an A. But THE BIG PROBLEM about this Redragon Keyboard is that it not always works like this. Sometimes you press A and your computer will read nothing, sometimes you press A and your computer will read AA twice or AAA thrice. And that's not only with the A letter but almost 40% of the keys. You are going to think my keyboard was just broken, I was unlucky and the other keyboards work well, but no. When I was going to buy the keyboard I did read some reviews saying this thing, but I did not put that much attention, and in the end, the keyboard sucks for typing, and a keyboard that sucks for typing is a UNUSUFUL keyboard. The interesting thing is that I can use the keyboard because I'm patient and I press and press and press and fix all that the keyboard makes wrong, but it has no sense paying for something like that. Not always the same keys have problems, they change a lot, I still do not know why and how, W can work today, but tomorrow W does not work, and in a week W works again. I am typing the review with this keyboard, and you cannot imagine how much I have to go back in each word and fix it. And of course, this keyboard is NOT FOR GAMING, it is even worst for gaming, imagine playing and pressing W to go forward and your character never moves, yes, I was killed a lot. I repeat, please DO NOT BUY THIS KEYBOARD. Buy this keyboard if you just want awesome backlights to showcase, because that is the real good thing about this keyboard, it looks beautiful and it has lots of transitions and modes (I could never find the software to configure and personalize them though). To make you notice how bad the keyboard is, after just one week of use, I was already having these typing issues, read more reviews, you are gonna see this is not an isolated problem.

ولا غلطه كم معي 3 سنين

Un excelent clavier mécanique pour un prix bas. J'adore travailler avec ça longues journées de programmation et écriture sur l'ordi.

Lo utiliza mi hijo, esta muy contento con el producto, los materiales son de buena calidad y permite una limpieza completa, eso nos gustó mucho.

Exceeded my expectations

Had it for a year or 2 now and I'm using it right now to write this. if you look online and look at some of the good mechanical keyboards you can definitely tell the difference by sound. it is quite loud but I like it and definitely recommend if your looking for a good budget keyboard for gaming. It is a little bit of false advertising it terms of the fact that it isn't RGB but instead only red. Its my fault for not reading it properly but its a bit misleading if you look at the photo.