Universal Deluxe Rotisserie Kit for Grills

Great quality and works good!

As advertised

I received this rotisserie the last week of July. I had done a lot of research on what it would take to install this on my Weber grill before purchasing. I knew up front that I would have to do some minor work on the grill to get it to fit so I could close the cover. I used a 1/2" diameter rotary metal bit in my drill to widen and deepen the most center cutouts on each side of the grill. The cutouts were approximately 3/8" wide and about 3/8" deep, I didn't have to remove much stock for width and had to increase depth about 1/4". The grill is cast aluminum so stock removal was easy. If you don't have a rotary metal bit I'm sure that a round file would do the trick with a little work. Also you will need to drill a couple holes for the mounting bracket screws. It took me about 30 minutes to alter the grill, mount the brackets and a little high temp spray paint for grills to cover the scalloped areas. I used the rotisserie two days after receiving and it works great. I've done chickens, beef and pork loins & roasts on it and it works great. No problems. I did a 9# roast on it and it had no problem. I did not need the extension that comes with it as my grill is about 24" long, and with the mounting brackets on each side its the perfect length for the grill. We grill quite often and I use the rotisserie at least once a week. It's been three months and still going strong. We grill all through the winter, only not quite as often, looking forward to rotisserie use this winter season. The only down side is the plastic handle for tightening the counterweight. The threads stripped on the first use. I have an assortment of nuts and found one that fit and then purchased a stainless steel nut so it would not rust. Have to use a wrench to tighten and untighten. The plastic handle threads are not the same as the rod, they are larger so they strip very easily. I thought I might be able to recut the threads but the opening is too large. I read lots of reviews that call this out and thought maybe the supplier would have addressed this issue by now. Shame on them! So if you have a grill this might fit and are handy it's a great buy.

I really had a desire for a rotisserie chicken. I haven’t used the grill yet this year so I wanted to start with a bang. This rotisserie installed in about 20 minutes. It has everything needed to install it. I just received it today and in no time at all I'm cooking a juicy bird. Motor is very quiet and has plenty of cord. The rod is sturdy and looks to be chrome coated. It works perfectly.

After returning other Rostisserie Kit that felt cheap and it was one or two inches shorter then my Dyna-Glo Grill, I got this one and I am very happy with it. It looks better, feels sturdier and has more parts. I have used it three times now and it was a success. Not all grills have the same width. While unversla kits may work for many models, some of them may not be long enough for some grills. Make sure you check compability to your grill width.

at first it was ok but as time went on it started to not functionality .

good quality and price

Love this BBQ rotisserie. Strong, silent motor. One caveat - there is a counter balance which is held in place by the plastic rotisserie handle. This puts quite a bit of pressure on the plastic which I feel will fail quickly. Other reviewers have commented about this. By putting a 3/8" washer (I used stainless steel) between the counter balance arm and the handle, the stress load is equal all the way around. If you don't overtighten the handle this set-up should give you many years of service. Just sayin

Por el tiempo que lo tengo, el motor y la espada funcionan muy bien. El problema es el mango, es de muy mala calidad, la verdad es que deberían cambiar ese diseño del mango, es la razón por la que le doy 3 estrellas.. [Dic/2025] Quiero actualizar mi opinión, porque si bien el mango fue de mala calidad, sigue fuencionando despues de los años. Me ha permitido hacer muy buenos cortes. 100% recomendable.

Very Happy with product quality & easy installation.

LLEGO A TIEMPO Y BUENA CALIDAD

Fit on my charbroil bbq perfectly works better than I ever thought for the price

Pro: Easy to install and everything except the plastic handle is good quality, to fix the handle stripping / breaking issue. I just solved it with a 1.5" 3/8ths #16 bolt going through from inside the handle and a 3/8" #16 connecter nut to the rod. Problem solved, and it is more stable than the original.