Possbay Shark Fin Antenna, Car AM FM Signal Roof Aerial with Adhesive Tape Universal for BMW VW Car SUV Truck Van (Blue)

Wanted to get rid of that huge antenna mast but didn't want a solution that involved tools. This fit over my old base fine, but I did use two strips of electrical tape to hold the wire down before the coil inside.The coil is a little unnecessary as it just takes up more space, but if your savvy just do what other reviewers did and modify the wire to your liking, or even just a little tape like I did.I got the adhesion onto the base of the product fine, but the adhesive strip does come bent up like other reviewers have mentioned. I also got it screwed in and placed on the roof with no problem. The screw is taller than the treading on my car but other reviewers have mentioned that as well, so get a smaller screw if that bothers you.I do see a slight gap between the plastic and the roof where some of the adhesive strip can be seen in some places, but this is only upon very close inspection and doesn't bother me at all. Standing anywhere around my car this thing looks factory installed and the black gloss just shines amazingly.I won't lie, upon turning my radio on in the driveway I was only able to get one FM channel. It could be due to the longer screw causing a weak connection to the products antenna, or the fact that this isn't as effective as a tall mast. I do live in the country so maybe signal improves when closer to the signals source. Satellite radio came in fine.This isn't a problem for me as I mostly use my cars radio as an AUX for a tablet mounted setup I have in my car. If your main source is FM radio you might want one with dual antenna if you live out in the country. If you mostly use AUX or live in a city than this will be no problem for you.Final thoughts, I'm very satisfied with the product. It definitely makes my Dart stand out and accents the other gloss parts I've installed. Setup was fast and easy, and the final result was definitely worth the money and tape for me.

Was easy to install on my 2014 Explorer. Looks good and works great. I got it to replace the tall wire antenna so there wouldn't be any issues at the car wash. I originally replaced the old wire antenna with the 2" stubby but it had poor reception. This one is the best antenna to use

zero reception... no local stations anymore..same reception hooked up or not

I used this to repair a broken antenna on my 2013 Ford Escape. The existing antenna was brittle from years in the sun, and shattered. I was able to sloppily glue that together, and then install this antenna over top.It was a tight fit for my vehicle, but a great alternative to spending hours pulling down the headliner to install the oem antenna base.I would recommend some rtv adhesive sealant both in the screw threads and on the base of the antenna when installing. I was not confident that the included 3M tape would hold the antenna long term.For a vehicle with 200k miles, this product was worth the time and money saved. It’s not perfect, but it will get me by.

Shark fin broke off on 2015 Hyundai Sonata after freezing temps and snow. Car is out of warranty and the dealership doesn’t replace covers, they replace the entire assembly. My car has 177,000 miles on it so I couldn’t justify spending money on the entire assembly. I was worried about this shark fin replacement fitting and my radio and nav system working but took my chances.This shark fin cover fits and my radio/nav system works well. I didn’t hook any wires up or do anything special because I truly just don’t care and just wanted the electrical board covered.So, I gorilla glued the bottom of the shark fin and covered the electrical board with the fin. I let that sit for a couple days and didn’t drive my car then sealed it with black silicone all around. I let this sit for 15 hours overnight. I woke up and there was frost all over my car and the fin so I thought it would break off. But had to go to work so I took my chances! All was well and I drive on the highway and it didn’t fly off. It is extremely secure, fits and covers the board, and the radio/nav system still works!!If you don’t have gorilla glue or black silicone, JB weld would work fine too.

It works, nothing much to report on this, it's a cheap antenna and it does the job. Looks okay, it does feel cheap, but it gets reception - so thats all that matters right?

Only one that I could make fit my Hyundai Kona- had to use silicone to stick it on. Be prepared to struggle getting it to fit on. It’s a cover- my fm radio does NOT work now but my original antenna thingie fell off car in car wash maybe so at least it covers it till I want to pay Hyundai $500+ to put a real one on. At least it’s not ugly w the wires etc showing. I’m sure if it fit your car it would be great if you still have the attachment wire (mine was gone that’s why no radio).

It fit over the bottom portion that was still left on my car. I had to customize it a little.