RAD Sportz 2-Pack of Kayak Storage Hook Sets - Kayak Wall Mount Hangers with 100lb Capacity Per Pair for Paddleboards, Surfboards,

Holds a 14' Old Town tandem otter, which also weighs over 80lbs. It was super easy to install, and everything was good quality. Even the hardware which I was skeptical of because of some reviews but the screws they sent me were pretty heavy duty. Even the drywall anchors all worked fine without any issues, and I usually have to buy a pack from the hardware store to use instead but not with these. They all worked fine. I screwed the center screws directly into the studs of the garage wall (after drilling pilot holes) and then added the drywall anchors for added support. I don't think you necessarily need the drywall anchors but if you have a heavy kayak like mine, it's good insurance in case something fails. Great product, and really helps with storage space. Will probably buy another set for my other kayak.Edit: bought a second set for my fishing kayak, a 10' Lifetime Teton 100. Again, worked great. Only issue was I mounted to a fance on the posts, and the posts were a little farther apart than I anticipated, so I had to put the hooks a bit further apart than I would've liked. This meant that the shape of the hull being thicker towards the bow and stern caused it to sit a little awkward on the hooks, but I used a couple of cam straps to secure the kayak and that solved the problem. So all in all, these are absolutely great, and have no complaints. 10/10 would highly recommend.

These are some very good hooks, and will hold up my kayaks well. I will agree with the other reviews when they say first of all, GET MORE STURDY SCREWS!!! The screws that come with this are flimsy and the heads will break off when you're screwing them into the stud. My husband used heavy duty nails to secure mine. Also, the way the brackets are spaced out, they only sit against one stud, they do not both hit a stud in height, so they're not as secured as they could be. But, I have lighter Sundolphin kayaks, so that's not an issue. It fits them snugly and holds them well so they're up off the ground. My only other issue with these is the little silver screw that joins the two pieces of the hanger together. It's a tad too long, so it sticks up a little bit and it makes me extra cautious when hanging my kayak on it. But overall, I'm happy with these hangers. I like that it has cushioned hooks so your kayak is not sitting against metal, and that it holds them pretty tight against the wall so they're not jutting out and easy to run into walking around.

Easy to install, sturdy, padded, good buy!

So yes, I knew about a couple of things when I purchased these. I have plenty of tools and made short work of modifying the screws that hold the two sections together. That said, this is why I dinked it a star--- the solution is so simple and would cost them zero.... they should have made the screw that holds the two sections go side to side--- problem solved. Also it only puts the one side of the screw in shear--- not both, so if it passed through and the nut was on the far side... the two halves would be even more secure... What others have said and I agree--- the screw sticks out and can scratch/gouge your kayak, etc. I shortened the screw with an angle grinder and a flap wheel--- but again, I have tools and that is not what you may have. A file would work, but will just take longer....or go purchase two screws that are 1/8" shorter. That aside, I have two kayaks that I wanted to get off of the ground as they were always dirty on the bottom and water would get inside...and leaves (I do have the cockpit covers, but water still made its way in. I was looking to find a mount for outside and the first brand I bought on Amazon--- they simply were not going to work. I ended up finding these and bought two sets.After some measuring and marking where I wanted them to mount, I did not use the included screws and used some from my collection of coated decking screws to mount it to the outside of my shed. Once up, they are solid. These were used with 11' long 54-pound kayaks and they are now nicely off of the ground and with them hanging sideways and covers on....water and debris inside as well as dirt on the outside are now but a thing of the past. It also makes it much better to grab them and go--- they are at a much better lifting height. I have one that is about waist height and the second is above that is just above my shoulders--- so easy to get either one.Overall, they work well and besides the known issues, I will be buying two more sets in the future for another location that we keep them as they have definitely been a positive upgrade for our watersports.

The product installed very easily with all the provided hardware and no modifications. The screws on the flanges will use the provided drywall anchors. There will be two screws through the posts that go directly into studs.Verify the depth of your kayak. I have a Malibu 2XL and I would say that I wish the holding arms were a bit wider as my kayak simply does not fit well. I had to install an extra anchor to tie off the top edge to make sure it doesn’t fall over. This is not a product issue per se, I just didn’t think verify the depth of my kayak before buying.If I had a slightly smaller kayak this would be perfect

This was great to hang my kayak on the back side of my house! Super easy to assemble and overall great product!

Easily hold up my 10 ft paddle board. Make sure to place in studs and you should have no problem! Only issue was the screws that join the Two pieces together didn’t fit great but they did the job

Needed to hang my kayak in our garage and these were the perfect solution! They were easy to install and have proven to be quite sturdy! They allow us to maximize storage space and safely store our kayak. Highly recommend to anyone looking to store their water vessel!

Si tu kayak es un catch 110 o 130 no te servirá

I give this 5 stars as the price is good and it just works perfect. Is it the very best quality I have ever seen....no. But its functional quality is right on. I have seen better welding and powder coating but everything fitted together and it was installed in 10 minutes and my kayak was securely mounted. I bought a second one. I figure its better to spend more money when it matters. This does the job and well.

Bastante resistente, lo utilizo para un Tamarack

Bought two sets to hang up two 12’ kayaks on outside of lake shed wall, one above the other. Cockpits can either face wall or face outward. Super easy to put together and install. I didn’t have any problems with screws stripping or breaking, even using an impact driver to drive screws. However, I did use slightly larger and longer screws than those supplied to go through the two holes in the tubes to go directly into the studs behind the walls. That alone made it solid enough to hang kayaks with the other screws through the metal plates providing insurance. Seems very solid. Highly recommend.

Buen producto, tornillos débiles