MOOG 513296 Wheel Bearing and Hub Assembly for Nissan Altima

Worth every penny. My car glides on the road now. It fit my 2015 altima perfectly. I absolutely recommend this product.

Ok. So here is the deal. It’s not a job for the faint of heart. But it is completely doable. The axle bolt is big and tight. I took the center cap off the wheel and put the vehicle back down to remove it. I forgot the size of the socket but it was not one you will have.Make sure you take the speed sensor off before trying to remove the hub.To remove the hub I removed a stud and used a big bolt and nut to “press” it off. Worked like a charm. Took a couple hours to do the job working on my garage floor. Lots of wrenching and a little cursing but I was able to do it. Worth the effort to save the 700 bucks for a local mechanic to do it.

Excellent fit and finish. Decent price from Amazon for a quality MOOG hub. (Make sure you clean up the surface of the knuckle well and apply a light coat of anti-seize; it will make the reassembly go much smoother. I used a 5" angle grinder with a flap sanding disc for cleaning; worked great. Also make sure you have the hole for the anti-lock brake sensor lined up correctly, or you'll end up having to rotate the hub 180 degrees.)

Took care of the rumbling noise I had, and installation went as expected. So much beating required to remove the old one, but that isn't the fault of anyone other than time.

So, after carefully inspecting the used item. Other than being full of dirt and lint, the only thing I could tell wrong was someone hacked the slots for the antilock brake system opening. It appeared to be ok overall. Not wanting to wait and due to needing to get the car back and running, I installed the used hub. I cleaned it up and seemed ok.Car runs great again. No more dull growl coming from the front end. I would recommend the seller lets the buyer know they may receive a used item. I was not happy with the used item surprise. For this case I would not use this seller again for any purchase.

They fit perfectly, the first pair were making a woowoo. Sound so I had to pay the mechanic again to do the whole job again. I returned for a exchange. An got a new set , the next day. I only had them on for a full week an i was very unsatisfied. I can see how they look of just a week in use. An u can see the rust corrosion starting to built. For a name like moog. They can do better.

No more sound or vibration. The mechanic told me it was one of the best brands for this particular part. Happy customer here.

I purchased and installed this product on my 2015 Nissan Altima. I'd like to address a couple of issues that some buyers reported such as: a) Product doesn't fit. b) product looks different. c) product doesn't allow for the ABS sensor to be re-installed. A) After removing the old hub from the knuckle, clean the opening really good, there is a lot of crud in there that will make installing the new hub assembly hard. B) Product looks different. Yes it does, but that doesn't mean it doesn't fit or is not the right product. The lug bolts plate on this hub assembly is round, the OEM is star-shaped and that's OK. This is not a problem, mechanically or aesthetically. C) product doesn't allow for ABS/speed sensor to be re-installed. I did that mistake too. Just turn the hub mounting back-plate 180 degrees. That's the piece that bolts to the knuckle. Your problem will be solved. That's it. I hope this helps someone.