Catuo50cc 70cc 90cc 110cc 125cc 135 ATV Quad Go-kart Carburetor CARB PZ19

Holy bejeebers, carbs are turning into cheap, disposable units. I blame the ethanol in the fuel nowadays that's killing carbs, but fortunately for these Chinese made ATVs, go karts, mini bikes, etc. the carbs are ridiculously inexpensive.A friend of mine has two Chinese 4-wheelers that uses these carbs and one of them wouldn't start and idle. Of course the carb that originally came with the 4-wheeler had the heads of the screws attaching the bowl ground off so you couldn't get in it to clean it. But, of course we drilled the screws out and cleaned it as best we could. The end result was a running 4-wheeler that wouldn't idle. No problem--just tell the kids once you get going, don't stop!I picked up two of these carbs from Amazon since they were so inexpensive and knowing that they'll both get used at some point. This carb has the bracket for the cable operated choke.Great buy. If you can find gas without ethanol to run in these, that's the best option. If not, just buy a couple of these and swap in a new carb when it doesn't want to run well. Sure, you can try cleaning it (these come with screws attaching the bowl that can actually be removed), but in my experience I've never had a whole lot of luck cleaning these small carbs. Heck, these carbs are cheaper than what you'll probably spend on carburetor cleaner.

I purchased this carb for my 2015 Polaris 50cc quad. The description stated it wouldn’t fit a 2015 model, but I rolled the dice since it was cheap, compared to an OEM model and it worked perfectly.

The known disaster - the DS 70 - wouldn't run unless the carb was precisely set each time for the riding conditions. It had to be cleaned immaculately after each use.The OEM jets were smaller than a hair and gunked up even after running the thing dry. The OEM adjustments were poor. Before I put this aftermarket carb on, I first checked all the seals because I read one review that the bowl leaked, then bolted it on and it started up on the first go without choke. (Warm day).No leaks and it runs like a champ ever-since with a few minor, very easy idle adjustments.I'm thrilled and just bought a second one for the shelf. All connections were exactly the same as the oem. I recommend this product. Mine ATV is a 70cc common china \ vietnam produced motor.

I don't normally write reviews, but I always read them to make product decisions. I still can't believe the price of this product. I purchased it for a Sunl 110cc. The part looked almost identical to the carburetor that was on it, except the overflow on the bowl was at a different spot and it wouldn't fit. I ended up using the bowl from the old carburetor with the gasket from the new carburetor. It fit perfect and has no impact on the operation of the new carburetor. I installed the part and the 4 wheeler runs perfect. I adjusted the idle a little and it runs great! Very happy with this product. Hope this review helps someone else!

I had an old Kohler minibike engine from Sears which had a bad carb where the float was cracked. Replaced it with this carb and got the engine running with no problems. Had taken the engine to a local repair shop that wanted $69 just to diagnose the problem. The engine sat for three years before we found this carb and took a chance that it would work. Well worth the purchase.

I read nothing but good reviews so I figured I would try it on my Polaris 50cc outlaw. I was able to get everything hooked up correctly with a few adjustments to the choke and throttle cable, but when I went to fire it up it started leaking gas.

Great product for a great price. Had issues with the original carb as well as a replacement I bought earlier. Ordered this one and whipped it on and right out of the box it fixed all my issues I had been dealing with. Best part was there was minimal adjustment needed to dial it in

The carb in the Polaris 90cc was plugged. Solvents didn't do the job. I saw this replacement, we decided to give it a try. My teenager made the installation, it fit nicely. After few adjustments with the idle position the ATV is running smoothly